An experimental high-strength steel 20Kh2G2SNMA with high resistance of supercooled austenite to formation of diffusion transformation products is studied. Dilatometric analysis of the phase and structural transformations under continuous cooling and isothermal holding is performed. The time-temperature ranges of the transformations are found. The thermokinetic diagram is plotted. The mechanical properties of the steel are determined after different treatments, i.e., annealing, normalizing, quenching, tempering, isothermal and step quenching. It is shown that the presence of bainite in the structure lowers the impact toughness of the steel independently of its morphology and of the temperature range of its formation.
Similar content being viewed by others
References
S. Zubchenko (ed.), Grades of Steels and Alloys [in Russian], Mashinostroenie, Moscow (2003), 784 p.
Shan and L. Fu, “Heat treating of air-hardening high-strength structural steels,” in: J. L. Dossett and G. E. Totten (eds.), Heat Treating of Irons and Steels, Vol. 4D, ASM Int., USA (2014), pp. 169 – 178.
V. M. Maisuradze, M. A. Ryzhkov, Yu. V. Yudin, and A. A. Ershov, “Heat treatment of parts with variable cross section from high-strength engineering steels,” Metallurg, No. 8, 101 – 104 (2014).
M. V. Maisuradze, Yu. V. Yudin, and D. I. Lebedev, “Thermal strengthening of large parts made from high-strength sparingly doped steel in air,” Steel in Trans., 50(5), 61 – 66 (2020).
G. F. Totten (ed.), Steel Heat Treatment. Metallurgy and Technologies, CRC Press (2006), 848 p.
Yu. N. Simonov, N. Panov, M. Yu. Simonov, et al., “Principles of design of the chemical composition of steels for forming a structure of lower carbide-free bainite under delayed cooling,” Metal Sci. Heat Treat., 57, 386 – 394 (2015).
L. E. Popova and A. A. Popov, Diagrams of Transformation of Austenite in Steels and of Beta-Solution in Titanium Alloys [in Russian], Metallurgiya, Moscow (1991), 503 p.
Transformation Characteristics of Direct-Hardening Nickel-Alloy Steels, The Mond Nickel Company, UK (1958), 91 p.
S. K. Berezin, A. A. Shatsov, P. O. Bykova, and D. M. Larinin, “Martensitic transformation in low-carbon steels,” Metal Sci. Heat Treat., 59(7 – 8), 479 – 485 (2017).
L. M. Kleiner, D. M. Larynina, L. V. Spivak, and A. A. Shatsov, “Phase and structural transformations in low-carbon martensitic steels,” Phys. Met. Metallogr., 108(2), 153 – 160 (2009).
J. Pacyna and L. Witek, “The effect of carbides on fracture toughness of steels of ferritic matrix,” Mater. Technol., 59(2), 68 – 74 (1988).
M. A. Ryzhkov and A. A. Popov, “Methodological aspects of plotting of thermokinetic diagrams of transformation of supercooled austenite in low-alloy steels,” Metal Sci. Heat Treat., 52(11 – 12), 612 – 616 (2011).
M. V. Maisuradze, M. A. Ryzhkov, Yu. V. Yudin, and A. A. Kuklina, “Transformations of supercooled austenite in a promising high-strength steel grade under continuous cooling conditions,” Metal Sci. Heat Treat., 59(7 – 8), 486 – 490 (2017).
M. V. Maisuradze, Yu. V. Yudin, and A. A. Kuklina, “A novel approach for analytical description of the isothermal bainite transformation in alloyed steels,” Mater. Perform. Charact., 8(2), 80 – 95 (2019).
K. W. Kim, K. I. Lim, C.-H. Lee, et al., “On control of retained austenite morphology through double bainitic transformation,” Mater. Sci. Eng. A, 673, 557 – 561 (2016).
Navarro-López, J. Hidalgo, J. Sietsma, and M. J. Santofimia, “Characterization of bainitic/martensitic structures formed in isothermal treatments below the Ms temperature,” Mater. Charact., 128, 248 – 256 (2017).
Argüelles, F. Barbés, J. I. Espeso, and C. Garcia-Mateo, “Cryogenic study of the magnetic and thermal stability of retained austenite in nanostructured bainite,” Sci. Technol. Adv. Mater., 20(1), 673 – 687 (2019).
J. G. Speer, “Phase transformations in quenched and partitioned steels,” in: E. Pereloma and D. V. Edmonds (eds.), Phase Transformations in Steels, Woodhead Publishing Ltd, Cambridge (2012), pp. 247 – 270.
L. Wang and J. G. Speer, “Quenching and partitioning steel heat treatment,” Metallogr., Microstr., Anal., 2, 268 – 281(2013).
M. V. Maisuradze, M. A. Ryzhkov, and D. I. Lebedev, “Microstructure and mechanical properties of martensitic high-strength engineering steel,” Metallurgist, 64(7 – 8), 640 – 651 (2020).
M. V. Maisuradze, Yu. V. Yudin, A. A. Kuklina, and S. I. Lebedev, “Formation of microstructure and properties during isothermal treatment of aircraft building steel,” Metallurgist, 65(9 – 10), 1008 – 1019 (2022).
M. V. Maisuradze, M. A. Ryzhkov, and D. I. Lebedev, “Mechanical properties of a mild-alloy steel for aerospace engineering,” Defect Diffus. Forum, 410, 221 – 226 (2021).
The work has been performed to implement grant No. 22-29-00106 of the Russian Scientific Foundation.
Author information
Authors and Affiliations
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 9, pp. 51 – 57, September, 2022.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Maisuradze, M.V., Yudin, Y.V., Kuklina, A.A. et al. Effect of Heat Treatment on Mechanical Properties and Microstructure of Advanced High-Strength Steel. Met Sci Heat Treat 64, 522–527 (2023). https://doi.org/10.1007/s11041-023-00845-x
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11041-023-00845-x