Abstract
Zinc oxide (ZnO) nanorods (NRs) with high transmittance and low resistance were produced on glass substrates in two steps. Initially, a ZnO seed layer was produced via sol–gel spin coating and heat treatment, and in the second step ZnO-NRs were grown on the ZnO seed layer via hydrothermal growth. The ZnO samples were identified by XRD. Average crystallite sizes were found to be 45 and 60 nm, for the ZnO seed layer and the ZnO-NRs, respectively, from XRD results using the Scherrer formula. Average grain sizes of the ZnO thin films were determined with FE-SEM and found to be 62 and 68 nm for the ZnO seed layer and the ZnO-NRs, respectively. The ZnO-NRs were very dense when grown to a (film) thickness exceeding that of the seed layer. After the growth of the ZnO-NRs, the starting thickness of ZnO seed layer was reduced from 360 to 60 nm. This revealed that the ZnO-NRs’ growth consumes the sol–gel deposited ZnO seed layer significantly, which in turn affects the NR array’s properties. The electrical conductivity values of the ZnO seed layer and ZnO-NRs/ZnO seed structure films were measured as 6.98 × 10−9 and 2.08 × 10−8 Ω−1 cm−1 at 25 °C, and 9.31 × 10−8 and 8.99 × 10−7 Ω−1 cm−1 at 300 °C, respectively. In other words, the ZnO-NRs/ZnO seed structure had higher electrical conductivity than the starting ZnO seed layer alone. In agreement, the ZnO-NRs/ZnO seed structure had a much higher transmittance (80–90% in the UV–Vis range) than the starting seed layer. These suggested that the ZnO-NRs has better crystal quality with lower defects along their length and hence the seed layer consumption is a benefical factor in obtaining ZnO NR arrays with high quality.
Similar content being viewed by others
References
N. Han, F. Wang, J.C. Ho, Nanomater. Energy 1, 4 (2011)
R.H. Horng, S.L. Ou, C.Y. Huang, P. Ravadgar, C.I. Wu, Thin Solid Films 605, 30 (2016)
M.D. Reyes Tolosa, J. Orozco-Messana, A.N.C. Lima, R. Camaratta, M. Pascual, M.A. Hernandez-Fenollosa, J. Electrochem. Soc. 158, E107 (2011)
J.C. Sun, J.Z. Zhao, H.W. Liang, J.M. Bian, L.Z. Hu, H.Q. Zhang, X.P. Liang, W.F. Liu, G.T. Du, Appl. Phys. Lett. 90, 121 (2007)
L. Vayssieres, Adv. Mater. 15, 464 (2003)
P.N. Mbuyisa, O.M. Ndwandwe, C. Cepek, Thin Solid Films 578, 7 (2015)
N. Huang, M.W. Zhub, L.J. Gaoa, J. Gonga, C. Suna, X. Jiang, Appl. Surf. Sci. 257, 6026 (2011)
S. Kim, G. Nam, H. Park, H. Yoon, S.-H. Lee, J.S. Kim, J.S. Kim, D.Y. Kim, S.O. Kim, J.Y. Leem, Bull. Korean Chem. Soc. 34, 1205 (2013)
Z.H. Ibupoto, K. Khun, M. Eriksson, M. AlSalhi, M. Atif, A. Ansari, Materials 6, 3584 (2013)
L.W. Brooks, J.M. Mativetsky, A. Woll, D. Smilgies, Y.L. Loo, Org. Electron. 14, 3477 (2013)
S.Y. Pung, K.L. Choy, X. Hou, C. Shan, Nanotechnology 19, 435609 (2008)
T.A.N. Peiris, H. Alessa, J.S. Sagu, I.A. Bhatti, P. Isherwood, K.G.U. Wijayantha, J. Nanopart. Res. 15, 2115 (2015)
S. Saini, P. Mele, H. Honda, T. Suzuki, K. Matsumoto, K. Miyazaki, A. Ichinose, L.M. Luna, R. Carlini, A. Tiwari, Thin Solid Films 605, 289 (2016)
H.G. Chen, Z.W. Li, Appl. Surf. Sci. 258, 556 (2011)
J. Zhang, W. Que, Sol. Energy. Mater. Sol. C 94, 2181 (2010)
C. Zhang, J. Phys. Chem. Solids 71, 364 (2010)
Y.C. Yoon, K.S. Park, S.D. Kim, Thin Solid Films 597, 125 (2015)
P. Singh, A. Nanda, Synth. React. Inorg. Met. 45, 1121 (2015)
J.D. Major, R.T. Zaera, E. Azaceta, L. Bowen, K. Durose, Sol. Energy Mater. Sol. C 160, 107 (2017)
G. Kartopu, D. Turkay, C. Ozcan, W. Hadibrata, P. Aurangb, S. Yerci, H.E. Unalan, V. Barrioz, Y. Qu, L. Bowen, A.K. Gürlek, P. Maiello, R. Turan, S.J.C. Irvine, Sol. Energy Mater. Sol. C 176, 100 (2018)
K.V. Gurav, U.M. Patil, S.M. Pawar, J.H. Kim, C.D. Lokhande, J. Alloys Compd. 509, 7723 (2011)
S. Xu, Z.L. Wang, Nano Research 4, 1013 (2011)
Bruker AXS GmbH, Diffracplus PDF Maint Powder Diffraction Database Manager Software, Printed in The Federal Republic of Germany (2000)
L.W. Ji, S.M. Peng, J.S. Wu, W.S. Shih, C.Z. Wu, I.T. Tang, J. Phys. Chem. Solids 70, 1359 (2009)
G. Kartopu, V. Barrioz, S.J.C. Irvine, A.J. Clayton, S. Monir, D.A. Lamb, Thin Solid Films 558, 374 (2014)
J.S. Park, I. Mahmud, H.J. Shin, M.K. Park, A. Ranjkesh, D.K. Lee, H.-R. Kim, Appl. Surf. Sci. 362, 132 (2016)
S. Yilmaz, O. Turkoglu, I. Belenli, Mater. Chem. Phys. 112, 472 (2008)
H. Colak, O. Turkoglu, Mater. High Temp. 29, 344 (2012)
J.B. Lee, H.J. Le, S.H. Seo, J.S. Park, Thin Solid Films 398–399, 641 (2001)
A. Sawalha, A.M. Abdeen, A. Sedky, Physica B 404, 1316 (2009)
D.J. Kwak, B.W. Park, Y.M. Sung, J. Korean Phys. Soc. 55, 1940 (2009)
M.I. Khan, K.A. Bhatti, R. Qindeel, L.G. Bousiakou, N. Alonizan, F. Aleem, Results Phys. 6, 156 (2016)
A.V. Patil, C.G. Dighavkar, S.K. Sonawane, S.J. Patil, R.Y. Borse, J. Optoelectron. Biomed. Mater. 1, 226 (2009)
C.S. Hong, H.H. Park, H.H. Park, H.J. Chang, J. Electroceram. 22, 353 (2008)
Acknowledgements
This research is financially supported by TUBITAK (The Scientific and Technological Research Council of Turkey) project number 114Z572, and Çankırı Karatekin University (BAP; FF28015B12).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Çolak, H., Karaköse, E. & Kartopu, G. Effect of consumption of the sol–gel deposited ZnO seed layer on the growth and properties of high quality ZnO nanorods. J Mater Sci: Mater Electron 29, 11964–11971 (2018). https://doi.org/10.1007/s10854-018-9298-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10854-018-9298-3