Abstract
We report a green chemical–physical approach for extracting cellulose nanocrystals (CNCs), using a two-step collaborative process combining solvothermal pretreatment and mechanical exfoliation. This method avoids the use of large volumes of sulfuric acid. The structure, morphology, size distribution, zeta potential, crystallinity, and thermal stability of the CNCs are characterized by Fourier-transform infrared spectroscopy, X-ray diffraction, thermogravimetric analysis, and scanning electron, transmission electron and atomic force microscopies. The yield and properties of the obtained CNCs are investigated and compared with those obtained by the conventional acid hydrolysis method. A yield of 72.17 ± 2.00% was obtained, which was significantly higher than that of 30–35% for the traditional sulfuric acid hydrolysis method. CNCs are obtained with an aspect ratio of 25 times, average length of 280 nm, and average width of 11 nm. The CNCs obtained by the two-step process exhibit better thermal stability than those obtained by the conventional acid hydrolysis. The combination of solvothermal pretreatment and mechanical exfoliation is an efficient and promising method for the large-scale production of CNCs for industrial application.
Similar content being viewed by others
References
Aparna R, Sivakumar N, Balakrishnan A, Sreekumar Nair A, Nair SV, Subramanian K (2013) An effective route to produce few-layer graphene using combinatorial ball milling and strong aqueous exfoliants. J Renew Sustain Energy 5:033123
Bossa N, Carpenter AW, Kumar N, Lannoy CF, Wiesner M (2017) Cellulose nanocrystal zero-valent iron nanocomposites for groundwater remediation. Environ Sci Nano 4:1294–1303
Chen L, Wang Q, Hirth K, Baez C, Agarwal UP, Zhu J (2015) Tailoring the yield and characteristics of wood cellulose nanocrystals (CNC) using concentrated acid hydrolysis. Cellulose 22:1753–1762
Deepa B, Abraham E, Cordeiro N, Mozetic M, Mathew AP, Oksman K, Faria M, Thomas S, Pothan LA (2015) Utilization of various lignocellulosic biomass for the production of nanocellulose: a comparative study. Cellulose 22:1075–1090
Del Rio-Castillo AE, Merino C, Díez-Barra E, Vázquez E (2014) Selective suspension of single layer graphene mechanochemically exfoliated from carbon nanofibres. Nano Res 7:963–972
Driscoll M, Stipanovic A, Winter W, Cheng K, Manning M, Spiese J, Galloway RA, Cleland MR (2009) Electron beam irradiation of cellulose. Radiat Phys Chem 78:539–542
Filson PB, Dawson-Andoh BE (2009) Sono-chemical preparation of cellulose nanocrystals from lignocellulose derived materials. Bioresour Technol 100:2259–2264
Frka-Petesic B, Radavidson H, Jean B, Heux L (2017) Dynamically controlled iridescence of cholesteric cellulose nanocrystal suspensions using electric fields. Adv Mater 29:1606208
Gao Y, Wang X, Yang H, Chen H (2012) Characterization of products from hydrothermal treatments of cellulose. Energy 42:457–465
Gencer A, Schutz C, Thielemans W (2017) Influence of the particle concentration and marangoni flow on the formation of cellulose nanocrystal films. Langmuir 33:228–234
Guidetti G, Atifi S, Vignolini S, Hamad WY (2016) Flexible photonic cellulose nanocrystal films. Adv Mater 28:10042–10047
Hu L, Luo Y, Cai B, Li J, Tong D, Hu C (2014) The degradation of the lignin in Phyllostachys heterocycla cv. pubescens in an ethanol solvothermal system. Green Chem 16:3107–3116
Jeon IY, Shin YR, Sohn GJ, Choi HJ, Bae SY, Mahmood J, Jung SM, Seo JM, Kim MJ, Wook Chang D, Dai L, Baek JB (2012) Edge-carboxylated graphene nanosheets via ball milling. Proc Natl Acad Sci USA 109(15):5588–5593
Jonoobi M, Oladi R, Davoudpour Y, Oksman K, Dufresne A, Hamzeh Y, Davoodi R (2015) Different preparation methods and properties of nanostructured cellulose from various natural resources and residues: a review. Cellulose 22:935–969
Kaushik M, Moores A (2016) Nanocelluloses as versatile supports for metal nanoparticles and their applications in catalysis. Green Chem 18:622–637
Lee WJ, Clancy AJ, Kontturi E, Bismarck A, Shaffer MS (2016) Strong and stiff: high-performance cellulose nanocrystal/poly(vinyl alcohol) composite fibers. ACS Appl Mater Interfaces 8:31500–31504
Li R, Fei J, Cai Y, Li Y, Feng J, Yao J (2009) Cellulose whiskers extracted from mulberry: a novel biomass production. Carbohydr Polym 76:94–99
Li Y, Liu Y, Chen W, Wang Q, Liu Y, Li J, Yu H (2016) Facile extraction of cellulose nanocrystals from wood using ethanol and peroxide solvothermal pretreatment followed by ultrasonic nanofibrillation. Green Chem 18:1010–1018
Lu Z, Fan L, Zheng H, Lu Q, Liao Y, Huang B (2013) Preparation, characterization and optimization of nanocellulose whiskers by simultaneously ultrasonic wave and microwave assisted. Bioresour Technol 146:82–88
Lyu H, Gao B, He F, Ding C, Tang J, Crittenden JC (2017) Ball-milled carbon nanomaterials for energy and environmental applications. ACS Sustain Chem Eng 5:9568–9585
Nascimento DM, Almeida JS, Dias AF, Figueirêdo MCB, Morais JPS, Feitosa JPA, Rosa MDF (2014) A novel green approach for the preparation of cellulose nanowhiskers from white coir. Carbohydr Polym 110:456–463
Novo LP, Bras J, García A, Belgacem N, Curvelo AA (2015) Subcritical water: a method for green production of cellulose nanocrystals. ACS Sustain Chem Eng 3:2839–2846
Shao L, Sun H, Miao L, Chen X, Han M, Sun J, Liu S, Li L, Cheng F, Chen J (2018) Facile preparation of NH2-functionalized black phosphorene for the electrocatalytic hydrogen evolution reaction. J Mater Chem A 6:2494–2499
Soares O, Rocha RP, Gonçalves A, Figueiredo JL, Órfão J, Pereira MFR (2015) Easy method to prepare N-doped carbon nanotubes by ball milling. Carbon 91:114–121
Tang L, Huang B, Ou W, Chen X, Chen Y (2011) Manufacture of cellulose nanocrystals by cation exchange resin-catalyzed hydrolysis of cellulose. Bioresour Technol 102:10973–10977
Tong WY, Abdullah AYK, Rozman NAS, Bin Wahid MIA, Hossain MS, Ring LC, Lazim Y, Tan W (2018) Antimicrobial wound dressing film utilizing cellulose nanocrystal as drug delivery system for curcumin. Cellulose 25:631–638
Xu J, Jeon IY, Seo JM, Dou S, Dai L, Baek JB (2014a) Edge-selectively halogenated graphene nanoplatelets (XGnPs, X = Cl, Br, or I) prepared by ball-milling and used as anode materials for lithium-ion batteries. Adv Mater 26(43):7317–7323
Xu J, Shui J, Wang J, Wang M, Liu H, Dou SX, Jeon IY, Seo JM, Baek J, Dai L (2014b) Sulfur–graphene nanostructured cathodes via ball-milling for high-performance lithium–sulfur batteries. ACS Nano 8:10920–10930
Yang X, Cranston ED (2014) Chemically cross-linked cellulose nanocrystal aerogels with shape recovery and superabsorbent properties. Chem Mater 26:6016–6025
Yi M, Shen Z (2015) A review on mechanical exfoliation for the scalable production of graphene. J Mater Chem A 3:11700–11715
Yu H, Qin Z, Liu L, Yang X, Zhou Y, Yao J (2013a) Comparison of the reinforcing effects for cellulose nanocrystals obtained by sulfuric and hydrochloric acid hydrolysis on the mechanical and thermal properties of bacterial polyester. Compos Sci Technol 87:22–28
Yu H, Qin Z, Liang B, Liu N, Zhou Z, Chen L (2013b) Facile extraction of thermally stable cellulose nanocrystals with a high yield of 93% through hydrochloric acid hydrolysis under hydrothermal conditions. J Mater Chem A 1:3938–3944
Yu H, Sun B, Zhang D, Chen G, Yang X, Yao J (2014) Reinforcement of biodegradable poly (3-hydroxybutyrate-co-3-hydroxyvalerate) with cellulose nanocrystal/silver nanohybrids as bifunctional nanofillers. J Mater Chem B 2:8479–8489
Zhang Z, Sun J, Lai C, Wang Q, Hu C (2017) High-yield ball-milling synthesis of extremely concentrated and highly conductive graphene nanoplatelet inks for rapid surface coating of diverse substrates. Carbon 120:411–418
Zhou S, Liu P, Wang M, Zhao H, Yang J, Xu F (2016) Sustainable, reusable, and superhydrophobic aerogels from microfibrillated cellulose for highly effective oil/water separation. ACS Sustain Chem Eng 4:6409–6416
Acknowledgments
This work was financially supported by Shanghai Natural Science Foundation (Grant No. 18ZR1400800), the Fundamental Research Funds for the Central Universities (No. 2232019D-3-19) and the Initial Research Funds for Young Teachers of Donghua University to Aiqin Gao. We thank Aidan G. Young, PhD, from Liwen Bianji, Edanz Group China (www.liwenbianji.cn/ac), for editing the English text of a draft of this manuscript.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
There are no conflicts of interest to declare.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Gao, A., Chen, H., Hou, A. et al. Preparation of high-aspect-ratio cellulose nanocrystals by solvothermal synthesis followed by mechanical exfoliation. Cellulose 26, 5937–5945 (2019). https://doi.org/10.1007/s10570-019-02507-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10570-019-02507-9