SpringerLink
Log in

Circular economy pillars: a semi-systematic review

  • Review
  • Published:
Clean Technologies and Environmental Policy Aims and scope Submit manuscript

Abstract

The need to reduce waste generation and resource extraction arising from the traditional linear economy system is gaining the attention of scholars, organisations and governments. A potential alternative is the circular economy concept, which can minimise waste, keep materials in circulation through reuse and recycling principles and consider the environmental, social and economic benefits of products. The circular economy evolved from some conflicting concepts and theories to a linear economy. The purpose of this study is therefore to identify those concepts and theories and to explore their potential contributions to the construction industry. To achieve the objective of the study, a semi-systematic review of extant literature was conducted. The results indicated that 14 concepts including cradle to cradle, regenerative design, biomimicry, performance economy, industrial ecology and reverse logistics are the pillars of the circular economy. The findings revealed that all the concepts share similar characteristics with the circular economy and are relevant to the construction industry, especially for environmental protection. Seven (50%) of the pillars are applicable for reuse and recycling, six (42.8%) for resource efficiency, three (21.4%) for design and two (14.3%) for service models. However, it is hoped that the results of this study will contribute to the body of knowledge on the circular economy concept and waste management. The development of a framework for the identification of suitable concepts for the construction industry is recommended for future studies.

Graphical abstract

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Subscribe and save

Springer+ Basic
EUR 32.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or Ebook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price includes VAT (Germany)

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1

Source: Ogunmakinde (2019)

Fig. 2

Source: Adopted from Findlow (2016)

Similar content being viewed by others

References

  • Abarca-Guerrero L, Maas G, van Twillert H (2017) Barriers and motivations for construction waste reduction practices in Costa Rica. Resources 6(4):69

    Google Scholar 

  • Abdelhamid MS (2014) Assessment of different construction and demolition waste management approaches. HBRC J 10(3):317–326

    Google Scholar 

  • Aciu C, Cobîrzan N (2013) Use of agricultural products and waste in the building materials industry. ProEnvironment/ProMediu 6:15

    Google Scholar 

  • Akinade OO, Oyedele LO (2019) Integrating construction supply chains within a circular economy: an ANFIS-based waste analytics system (A-WAS). J Clean Prod 229:863–873

    Google Scholar 

  • Alhola K, Ryding SO, Salmenperä H, Busch NJ (2019) Exploiting the potential of public procurement: opportunities for circular economy. J Ind Ecol 23(1):96–109

    Google Scholar 

  • Allwood JM, Cullen JM, Carruth MA, Cooper DR, McBrien M, Milford RL et al (2012) Sustainable materials: with both eyes open (p 64). UIT Cambridge Limited, Cambridge, UK

    Google Scholar 

  • Al-Obaidi K, Wei S, Ismail M, Kam K (2017) Sustainable building assessment of colonial shophouses after adaptive reuse in Kuala Lumpur. Buildings 7(4):87

    Google Scholar 

  • Amelung B, Martens P (2008) Wankele wieg (cradle to cradle). Milieudefensie Mag Amsterdam: Vereniging Milieudefensie 37(5):28–29

    Google Scholar 

  • Andrews D (2015) The circular economy, design thinking and education for sustainability. Local Econ Local Econ 30(3):305–315

    Google Scholar 

  • Arcadis (2017) Top 5 resources. From supply to demand (in Dutch). http://edepot.wur.nl/422138. Accessed 25 Nov 2019

  • Bakker C, Hollander M (2013) Six Design Strategies for Long Lasting Products in Circular Economy. http://www.theguardian.com/sustainable-business/six-design-strategies-longer-lasting-products. Accessed 4 March 2018

  • Balanay R, Halog A (2019) Tools for circular economy: Review and some potential applications for the Philippine textile industry. In Circular Economy in Textiles and Apparel (pp 49–75). Woodhead Publishing.

  • Benyus JM (1997) Biomimicry: Innovation inspired by nature. Biomimicry Institute, Missoula

    Google Scholar 

  • Benyus JM (2007) 12 sustainable design ideas from nature. TED, California

    Google Scholar 

  • Blue Economy (2016) Website. Principles. http://www.blueeconomy.eu/page/the-principles-of-blue-economy/

  • Boons F (2013) Ecological modernization and industrial ecology: The handbook of global companies. Wiley, Hoboken, pp 388–402

    Google Scholar 

  • Braungart M, McDonough W (2009) Remaking the way we make things: cradle to cradle. Vintage, London

    Google Scholar 

  • Braungart M, McDonough W, Bollinger A (2007) Cradle-to-cradle design: creating healthy emissions–a strategy for eco-effective product and system design. J Clean Prod 15(13–14):1337–1348

    Google Scholar 

  • Brown MT, Buranakarn V (2003) Emergy indices and ratios for sustainable material cycles and recycle options. Resour Conserv Recycl 38(1):1–22

    Google Scholar 

  • Chertow MR (2007) “Uncovering” industrial symbiosis. J Ind Ecol 11(1):11–30

    Google Scholar 

  • Chiu A, Geng Y (2004) Adaptation of industrial ecology in Asian develo** countries. J Clean Prod 12:1037–1045

    Google Scholar 

  • CIRAIG (International Reference Center for the Life Cycle of Products Processes and Services) (2015) Circular economy: A critical literature review of concepts. Montreal, Québec, Canada: Bibliothèque et Archives nationales du Quebec (BAnQ)

  • Damen MA (2012) A resource passport for a circular economy: An assessment of the possible content and format of a resources passport in order to successfully contribute to the achievement of the circular economy. Dissertation, University of Utrecht

  • Daugherty PJ, Myers MB, Richey RG (2002) Information support for reverse logistics: the influence of relationship commitment. J Bus Log 23(1):85–106

    Google Scholar 

  • De Brito MP, Dekker R (2004) A framework for reverse logistics. In: Reverse logistics. Springer, Berlin, Heidelberg, pp. 3–27

    Google Scholar 

  • Desai A, Mital A (2005) Incorporating work factors in design for disassembly in product design. J Manufact Technol Manage 16(7):712–732

    Google Scholar 

  • D’Souza C, Taghian M, Lamb P (2006) An empirical study on the influence of environmental labels on consumers. Corp Commun Int J 11:162–173

    Google Scholar 

  • Ellen MacArthur Foundation (EMF) (2013a) Towards circular economy: economic and business rationale for an accelerated transition, vol 1. Ellen MacArthur Foundation, United Kingdom

    Google Scholar 

  • Ellen MacArthur Foundation (EMF) (2013b) Towards the circular economy: opportunities for the consumer goods sector, vol 2. Ellen MacArthur Foundation, United Kingdom

    Google Scholar 

  • Erkman S (1997) Industrial ecology: an historical view. J Clean Prod 5(1–2):1–10

    Google Scholar 

  • Esposito M, Tse T, Soufani K (2017) Is the circular economy a new fast-expanding market? Thunderbird Int Bus Rev 59(1):9–14

    Google Scholar 

  • Esposito M, Tse T, Soufani K (2018) Introducing a circular economy: new thinking with new managerial and policy implications. California Manage Rev 60(3):5–19

    Google Scholar 

  • European Commission (EC) (2014a) Towards a Circular Economy: A Zero Waste Programme for Europe. Communication from the Commission to the European Parliament, the Council, the European Economic and Social Committee and the Committee of the Regions. European Commission, Brussels

  • European Commission (EC) (2017) The role of waste-to-energy in the circular economy. Communication from the Commission to the European Parliament, the Council, the European Economic and Social Committee and the Committee of the Regions

  • Figge F, Young W, Barkemeyer R (2014) Sufficiency or efficiency to achieve lower resource consumption and emissions? The role of the rebound effect. J Clea Prod 69:216–224

    Google Scholar 

  • Findlow F (2016) Reverse Logistics in a Circular Economy. CERASIS, Texas

    Google Scholar 

  • Freitas LA, Magrini A (2017) Waste management in industrial construction: investigating contributions from industrial ecology. Sustainability 9(7):1251

    Google Scholar 

  • Gaspar M, Julião J (2018) Tjahjono B (2018) Circular economy in a multiple helix perspective: a review. Management and Marketing (MAC-EMM, Economics, p 121

    Google Scholar 

  • Geisendorf S, Pietrulla F (2018) The circular economy and circular economic concepts—a literature analysis and redefinition. Thunderbird Int Bus Rev 60(5):771–782

    Google Scholar 

  • Geng Y, Fu J, Sarkis J, Xue B (2012) Towards a national circular economy indicator system in China: an evaluation and critical analysis. J Clean Prod. https://doi.org/10.1016/j.jclepro.2011.07.005

    Article  Google Scholar 

  • Ghisellini P, Cialani C, Ulgiati S (2016) A review on circular economy: the expected transition to a balanced interplay of environmental and economic systems. J Clean Prod 114(2016):11–32

    Google Scholar 

  • Giarini O, Stahel WR (1989) The limits to certainty—facing risks in the new service economy. Mass Kluwer Academic, Boston.

    Google Scholar 

  • Graedel TE, Allenby BR (2002) Hierarchical metrics for sustainability. Environ Qual Manage 12(2):21–21

    Google Scholar 

  • Graedel TE, Reck BK, Ciacci L, Passarini F (2019) On the spatial dimension of the circular economy. Resources 8(1):32

    Google Scholar 

  • Gregson N, Crang M, Fuller S, Holmes H (2015) Interrogating the circular economy: the moral economy of resource recovery in the EU. Econ Soc 44(2):218–243

    Google Scholar 

  • Greyson J (2007) An economic instrument for zero waste, economic growth and sustainability. J Clean Prod 15(13):1382–1390

    Google Scholar 

  • Häkkinen T, Huovila P, Tattari K (2002) Eco-efficient building process. In: från International conference of sustainable building, pp. 23–25

  • Hauschild M, Jeswiet J, Alting L (2005) From life cycle assessment to sustainable production: status and perspectives. CIRP Ann 54(2):1–21

    Google Scholar 

  • Hawken P, Lovins AB, Lovins LH (2013) Natural capitalism: the next industrial revolution. Routledge, Ambingdon

    Google Scholar 

  • Hayashi H, Kitamura M, Nagasawa SY, Suga T (2019) Hayashi H, Kitamura M, Nagasawa SY, Suga T (2019) Circular economy in business strategy of manufacturing company in technologies and eco-innovation towards sustainability I. Springer, Singapore

    Google Scholar 

  • Iung B, Levrat E (2014) Advanced maintenance services for promoting sustainability. Procedia CIRP 22:15–22

    Google Scholar 

  • Jabbour CJC (2015) Environmental training and environmental management maturity of Brazilian companies with ISO14001: empirical evidence. J Clean Prod 96:331–338

    Google Scholar 

  • Jawahir IS, Bradley R (2016) Technological elements of circular economy and the principles of 6R-based closed-loop material flow in sustainable manufacturing. Procedia Cirp 40(1):103–108

    Google Scholar 

  • Jones P, Comfort D (2018) The construction industry and the circular economy. Int J Manag Cases 20(1):4–15

    Google Scholar 

  • Kathijotes N (2013) Keynote: Blue economy-environmental and behavioural aspects towards sustainable coastal development. Proc Soc Behav Sci 101:7–13

    Google Scholar 

  • Kim K, Song I, Kim J, Jeong B (2006) Supply planning model for remanufacturing system in reverse logistics environment. Comput Ind Eng 51(2):279–287

    Google Scholar 

  • Korhonen J, Honkasalo A, Seppälä J (2018) Circular economy: the concept and its limitations. Ecol Econ 143:37–46

    Google Scholar 

  • Le Moigne R (2014) L’Économie circulaire. Dunod, France

    Google Scholar 

  • Lieder M, Rashid A (2016) Towards circular economy implementation: a comprehensive review in context of manufacturing industry. J Clean Prod 115:36–51

    Google Scholar 

  • Lifset R, Atasu A, Tojo N (2013) Extended producer responsibility: national, international and practical perspectives. J Ind Ecol 17(2):162–166

    Google Scholar 

  • Linder M, Sarasini S, van Loon P (2017) A metric for quantifying product-level circularity. J Ind Ecol 21(3):545–558

    Google Scholar 

  • Lindhqvist T (2000) Extended producer responsibility in cleaner production: Policy principle to promote environmental improvements of product systems. Lund University, Sweden

    Google Scholar 

  • Liu JYS (2012) Circular economy and environmental efficiency–the case of traditional Hakka Living system. Pro Soc Behav Sci 57:255–260

    Google Scholar 

  • Löfgren J, Enocson H (2014) Textile and recycling initiatives–A step towards a circular economy. Göteborgs universitet, Gothenburg

    Google Scholar 

  • Lowe DG (2001) Local feature view clustering for 3D object recognition. Paper presented at the computer vision and pattern recognition, 2001. CVPR 2001. Proceedings of the 2001 IEEE computer society conference

  • Manomaivibool P, Hong JH (2014) Two decades, three WEEE systems: how far did EPR evolve in Korea’s resource circulation policy? Resour Conserv Recycl 83:202–212

    Google Scholar 

  • Mars R (2005) The basics of permaculture design. Chelsea Green Publishing, Vermont

    Google Scholar 

  • Matete N, Trois C (2008) Towards zero waste in emerging countries–a South African experience. Waste Manage 28(8):1480–1492

    Google Scholar 

  • Maxwell D, Sheate W, Van Der Vorst R (2006) Functional and systems aspects of the sustainable product and service development approach for industry. J Clean Prod 14(17):1466–1479

    Google Scholar 

  • McDonough W, Braungart M (2002) Cradle to cradle: rethinking the way we make things. North Point, NY

    Google Scholar 

  • McDonough W, Braungart M (2008) 3 Remaking the way we make things: creating a new definition of quality with cradle-to-cradle design. The International handbook on environmental technology management 33.

  • McDonough W, Braungart M (2010) Cradle to cradle: remaking the way we make things. MacMillan, London

    Google Scholar 

  • McDonough W, Braungart M, Anastas PT, Zimmerman JB (2003) Peer reviewed: Applying the principles of green engineering to cradle-to-cradle design. Environ Sci Technol 37(23):434–441

    Google Scholar 

  • Merrild H, Jensen KG, Sommer J (2016) Building a circular future. GXN, Sydney

    Google Scholar 

  • Minunno R, O’Grady T, Morrison GM, Gruner RL, Colling M (2018) Strategies for applying the circular economy to prefabricated buildings. Buildings 8(9):125

    Google Scholar 

  • Mirabella N, Castellani V, Sala S (2014) Current options for the valorization of food manufacturing waste: a review. J Clean Prod 65:28–41

    Google Scholar 

  • Mont OK (2002) Clarifying the concept of product–service system. Journal of cleaner production 10(3):237–245

    Google Scholar 

  • Moon D, Holton I (2011. Learning legacy, Lessons learned from the London 2012 Games construction project. https://tinyurl.com/hn3loo7

  • Murphy S, Pincetl S (2013) Zero waste in Los Angeles: Is the emperor wearing any clothes? Resour Conserv Recycl 81:40–51

    Google Scholar 

  • Murray A, Skene K, Haynes K (2017) The circular economy: an interdisciplinary exploration of the concept and application in a global context. J Bus Ethics 140(3):369–380

    Google Scholar 

  • Ness D (2008) Sustainable urban infrastructure in China: Towards a Factor 10 improvement in resource productivity through integrated infrastructure systems. Int J Sust Dev World Ecol 15(4):288–301

    Google Scholar 

  • Ng WY, Chau CK (2015) New life of the building materials-recycle, reuse and recovery. Energy procedia 75:2884–2891

    Google Scholar 

  • Nugent S, Packard A, Brabon E, Vierra S (2016) Living, regenerative and adaptable buildings. Whole Building Design Guide—a program of the National Institute of Building Science. https://www.wbdg.org/resources/living-regenerative-and-adaptive-buildings

  • OECD (2016) Extended producer responsibility: Updated guidance for efficient waste management. https://doi.org/https://doi.org/10.1787/9789264256385-en

  • Ogunmakinde OE (2019) Develo** a Circular-Economy-Based Construction Waste Minimisation Framework for Nigeria. Dissertation, University of Newcastle

  • Onwuegbuzie AJ, Frels R (2016) Seven steps to a comprehensive literature review: a multimodal and cultural approach. Sage, Los Angeles

    Google Scholar 

  • Pauli GA (1997) Zero emissions: The ultimate goal of Cleaner Production. J Clean Prod 5(1–2):109–113

    Google Scholar 

  • Pauli GA (2010) The blue economy: 10 years, 100 innovations, 100 million jobs. Paradigm publications, Brookline

    Google Scholar 

  • Pauli GA (2011) From deep ecology to the blue economy. A review of the main concepts related to environmental, social and ethical business that contributed to the creation of The Blue Economy 17.

  • Pawlyn M (2011) How can we build more efficient structures? Biomimicry in Architecture. RIBA Publishing, Marylebone, pp 9–35

    Google Scholar 

  • Persson O (2015) What Is Circular Economy? – The Discourse of Circular Economy in the Swedish Public Sector. Dissertation, Uppsala University

  • Preston F (2012) A global redesign? Sha** the circular economy. Energy Environment and Resource Governance, Chatham House

    Google Scholar 

  • Prieto-Sandoval V, Jaca C, Ormazabal M (2018) Towards a consensus on the circular economy. J Clean Prod 179:605–615

    Google Scholar 

  • Qian G, Wang C (2016) Circular Economy Cities. In China's Eco-City Construction (pp 169–188). Springer, Berlin, Heidelberg

  • Rajput S, Singh SP (2019) Connecting circular economy and industry 4.0. Int J Inf Manage 49:98–113

    Google Scholar 

  • Ravi V, Shankar R, Tiwari MK (2005) Analyzing alternatives in reverse logistics for end-of-life computers: ANP and balanced scorecard approach. Comput Ind Eng 48(2):327–356

    Google Scholar 

  • Regenerative Leadership Institute R (2015) "What is Regenerative Design?". https://www.regenerative.com/regenerative-design. Accessed 8 March, 2016

  • Reijnders L (2008) Are emissions or wastes consisting of biological nutrients good or healthy? J Clean Prod 16(10):1138–1141

    Google Scholar 

  • Ren Y (2007) The circular economy in China. J Mater Cycles Waste Manage 9(2):121–129

    Google Scholar 

  • Rizos V, Tuokko K, Behrens A (2017) The Circular Economy: A review of definitions, processes and impacts. CEPS Research Report No 2017/8, April 2017

  • Saavedra YM, Iritani DR, Pavan AL, Ometto AR (2018) Theoretical contribution of industrial ecology to circular economy. J Clean Prod 170:1514–1522

    Google Scholar 

  • Schulte UG (2013) New business models for a radical change in resource efficiency. Environ Innov Soc Trans 9:43–47

    Google Scholar 

  • Snyder H (2019) Literature review as a research methodology: An overview and guidelines. J Bus Res 104:333–339

    Google Scholar 

  • Song Q, Li J, Zeng X (2015) Minimizing the increasing solid waste through zero waste strategy. J Clea Prod. https://doi.org/10.1016/j.jclepro.2014.08.027

    Article  Google Scholar 

  • Srinivas H (2015) Eco-efficiency. https://www.gdrc.org/sustdev/concepts/04-e-effi.html. Accessed 20 October 2018

  • Stahel WR (2010) The performance economy. Palgrave Macmillan, London

    Google Scholar 

  • Stahel WR (2013) Policy for material efficiency—sustainable taxation as a departure from the throwaway society. Philos Transac Royal Soc London Mat Phy Eng Sci 371(1986):20110567

    Google Scholar 

  • Stahel WR (2016) A new relationship with our goods and materials would save resources and energy and create local jobs. Circ Econ Nat News 531(7595):435

    CAS  Google Scholar 

  • Su B, Heshmati A, Geng Y, Yu X (2013) A review of the circular economy in China: moving from rhetoric to implementation. J Clean Prod. https://doi.org/10.1016/j.jclepro.2012.11.020

    Article  Google Scholar 

  • Templier M, Paré G (2015) A framework for guiding and evaluating literature reviews. Commun Associat Info Syst 37(6):112–137

    Google Scholar 

  • Tunn VSC, Bocken NMP, van den Hende EA, Schoormans JPL (2019) Business models for sustainable consumption in the circular economy: an expert study. J Clean Prod 212:324–333

    Google Scholar 

  • Ünal E, Shao J (2019) A taxonomy of circular economy implementation strategies for manufacturing firms: Analysis of 391 cradle-to-cradle products. J Clean Prod 212:754–765

    Google Scholar 

  • Vilches A, Garcia-Martinez A, Sanchez-Montañes B (2017) Life cycle assessment (LCA) of building refurbishment: A literature review. Energy Build 135:286–301

    Google Scholar 

  • Weber S (2019) A circular economy approach in the luxury fashion industry: a case study of eileen fisher. Springer, Singapore

    Google Scholar 

  • Willard B (2002) The Sustainability Advantage. New Society, Canada

    Google Scholar 

  • Wong G, Greenhalgh T, Westhorp G, Buckingham J, Pawson R (2013) RAMESES publication standards: meta-narrative reviews. BMC Med. https://doi.org/10.1186/1741-7015-11-20

    Article  Google Scholar 

  • **nan L, Yanfu L (2011) Driving forces on China’s circular economy: from government’s perspectives. Energy Procedia 5:297–301. https://doi.org/10.1016/j.egypro.2011.03.051

    Article  Google Scholar 

  • Xue B, Chen X, Geng Y, Guo X, Lu C, Zhang Z, Lu C (2010) Survey of officials’ awareness on circular economy development in China: based on municipal and county level. Resour Conserv Recycl 54(12):1296–1302. https://doi.org/10.1016/j.resconrec.2010.05.010

    Article  Google Scholar 

  • Ying J, Li-jun Z (2012) Study on green supply chain management based on circular economy. Phys Procedia 25:1682–1688

    Google Scholar 

  • Yuan Z, Bi J, Moriguichi Y (2006) The circular economy: a new development strategy in China. J Ind Ecol 10(1–2):4–8

    Google Scholar 

  • Zhijun F, Nailing Y (2007) Putting a circular economy into practice in China. Sustain Sci 2(1):95–101

    Google Scholar 

  • Zhu Q, Lowe EA, Wei YA, Barnes D (2007) Industrial symbiosis in China: a case study of the Guitang Group. J Ind Ecol 11(1):31–42

    Google Scholar 

  • Zuidema RH (2015) Open building as the basis for circular economy buildings. In Proceedings of the Future of Open Building Conference. ETH Zürich.

Download references

Acknowledgements

This paper is part of the lead author's PhD study, funded by the University of Newcastle International Postgraduate Research Scholarship (UNIPRS) and the University of Newcastle Research Scholarship Central and Faculty (UNRSC50:50).

Author information

Authors and Affiliations

  1. School of Architecture and Built Environment, University of Newcastle, Callaghan, NSW, 2308, Australia

    Olabode Emmanuel Ogunmakinde, William Sher & Temitope Egbelakin

Authors
  1. Olabode Emmanuel Ogunmakinde
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. William Sher
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Temitope Egbelakin
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Olabode Emmanuel Ogunmakinde.

Ethics declarations

Conflicts of interest

Author declared that they have no conflict of interest.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Ogunmakinde, O.E., Sher, W. & Egbelakin, T. Circular economy pillars: a semi-systematic review. Clean Techn Environ Policy 23, 899–914 (2021). https://doi.org/10.1007/s10098-020-02012-9

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10098-020-02012-9

Keywords

Search

Navigation