First described in laparoscopic surgery over 25 years ago [1, 2], colorectal resection with intracorporeal anastomosis (ICA) and transrectal extraction of specimen (TRSE) has not gained significant traction. Early experience revealed numerous patient benefits including less postoperative pain, less opioid utilization, faster recovery, lower complication rates and greatly reduced hernia rates compared to conventional laparoscopy [3,4,5]. Yet it is estimated that this approach is offered to fewer than 1% patients presenting for a left-sided colorectal resection, primarily due to technical barriers [6].

Enabling technologies such as the robotic platform, as well as a continued push toward total intracorporeal surgery has resulted in a resurgence of intertest. Robotic right sided procedures with ICA for instance have been gaining widespread adaptation [7] but eliminating the extraction incision altogether for procedures involving the left colon has yet to be examined in earnest. We first reported on the feasibility of robotic natural-orifice ICA with transrectal extraction of the specimen for left colectomy in 2018 and termed it the NICE procedure [6]. Thereafter we reported a stepwise technique to afford a reproducible and consistent approach [8].

We have since expanded our utilization of the robotic NICE procedure to more technically challenging cases involving complicated diverticulitis. These procedures are known to involve an inflammatory process with thickened mesentery, distorted pelvic anatomy, obliterated tissue planes and high conversion rates [3. A small sized Alexis wound retractor (Applied Medical, Rancho Santa Margarita, CA, USA) is clamped with a Kocher, lubricated and carefully inserted transanally and expands across the divided rectal wall. The rectal lumen is then dilated with a medium and large circular sizer (Fig. 4).

Fig. 3
figure 3

NICE back table

Fig. 4
figure 4

A Alexis preparation and lubrication. B Alexis inserted transrectally, in place for extraction phase. C Circular sizer preparation and lubrication. D Dilation of sphincters with circular sizer previously to extraction of specimen(s)

A long ring forceps is then inserted through the Alexis and grasps the divided edge of the specimen for extraction. For large specimens with a bulky mesentery, trauma during the extraction process is mitigated by thinning the specimen prior to extraction. The monopolar scissors are used to release the mesentery along the length of the bowel in a linear fashion while under traction (Fig. 5). The specimen is then extracted transrectally (Figs. 6, 7).

Fig. 5
figure 5

Shaving of the bowel wall mesentery

Fig. 6
figure 6

Extraction of the mesentery

Fig. 7
figure 7

Rectosigmoid segment separated from the mesentery

In preparation for the ICA, the Alexis is inverted and removed, and the circular stapler device is introduced transrectally. The anvil is detached and then it is secured to left colon with a pursestring suture consisting of 6-inch, 3.0 barbed suture on a V20 needle (V-Loc 180™, Covidien; Mansfield, MA, USA). In the event that bowel contents have leaked from the open colon during the extraction process, the area is locally irrigated and aspirated until clear. The rectal cuff is closed around the spike of the stapler with a second pursestring suture to facilitate the colorectal anastomosis. We routinely use Firefly® (Intuitive Surgical Inc., Sunnyvale, CA, USA) perfusion assessment prior to performing the anastomosis. In cases in which the distal transection is in the lower rectum, the robotic stapler is used to close the rectal cuff.

Postoperative management

All patients received enhanced recovery pathways (ERAS) postoperatively, consisting of early ambulation, education and counseling, early feeding and multimodal opioid-sparing pain control recovery.