Log in

Investigation and fine-tuning of optoelectrical features of tertiary aminophenyl-activated poly(1,3,4-oxadiazole) conjugated system

  • Original Paper
  • Published:
Polymer Bulletin Aims and scope Submit manuscript

Abstract

A novel π-conjugated polymer with N-alkyl substituted side chains, viz. poly[(2-N,N′-dibutylaminophenyl)1,3,4-oxadiazole] (PNAPO), possessing tunable optoelectronic properties, has been synthesized and characterized. PNAPO exhibited good solubility, indicating its suitability for easy optoelectronic device fabrication. Flexible films of PNAPO have been fabricated by adopting a blending route using poly(methyl methacrylate) or polystyrene. The effect of PNAPO particle size reduction, in the nanoregion, on the optical characterization was evaluated by a re-precipitation strategy. PNAPO has been found to exhibit an emission wavelength in the region of 522–590 nm with good quantum yield, for different particle size dimensions. Interestingly, it has been observed to exhibit solvatochromism. Z-scan experiments, with Nd: YAG laser, reveal that PNAPO possesses a low optical limiting threshold value. Interestingly, it shows a low turn-on voltage (0.23 V), suitable for fabricating the active layers in optoelectronic devices. PNAPO has been found to be stable up to 240 °C. These results highlight the possible utilization of PNAPO as an emissive layer in optoelectronic devices and for nonlinear optical (NLO) processes.

Graphical abstract

The graphical abstract represents the optical and electrical features of PNAPO. It indicates the structure of PNAPO. It shows the bright emissive property of PNAPO in the bluish green region of the electromagnetic radiation upon excitation with UV light. The light-emitting diode fabrication using PNAPO as an emissive layer is highlighted. A linear IV characteristic of PNAPO has also been indicated through a current–voltage plot.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Subscribe and save

Springer+ Basic
EUR 32.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or Ebook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Scheme 1
Fig. 1
Scheme 2
Fig. 2
Fig. 3
Fig. 4
Scheme 3
Scheme 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11

Similar content being viewed by others

References

  1. Yang Y, Guanxin Z, Hewei L, **g**g Y, Zitong L, Deeqing Z (2016) Highly sensitive thin film field effect transistor for ammonia with DPP-bithiophene conjugated polymer entailing thermally cleavable tert-butoxy groups in the solid chains. ACS Appl Mater Interfaces 8:3635–3643

    Article  CAS  PubMed  Google Scholar 

  2. Kakaraparthi K, Sang HP, Woosum C, Won-TP Yong-YN, Sung-HJ Jae WL (2016) New bulky side chain substituted benzodithiophene based 2D-conjugated polymers for optoelectronic applications. Polym Bull 73:2567–2581

    Article  CAS  Google Scholar 

  3. Meng H, Zhi KC, **ao LL, Yee HL, Soo JC, Wei H (1999) Synthesis and characterization of a novel blue electroluminescent polymer constituted of alternating carbazole and aromatic oxadiazole units. Phys Chem Chem Phys 1:3123–3127

    Article  CAS  Google Scholar 

  4. Inag S, Noriyuki K, Shotaro H, Toshio F (2014) Facile synthesis of a variety of triarylamine-based conjugated polymers and tuning of their optoelectronic properties. Synth Met 187:81–85

    Article  CAS  Google Scholar 

  5. Li B, Lei C, Yuying Z (2010) Conductive and optical properties of PPV modified by N+ ion implantation. J Polym Sci Part B Polym Phys 48:2072–2077

    Article  CAS  Google Scholar 

  6. Bogdan Z, Yuriy B, Volodymyr T, Christopher FH, Jamie AS, Parul R, Ryan DR, Charles T, Stephen EC, Stephen HF (2015) Rational design of methacrylate monomers containing oxadiazole moieties for single-layer organic light emitting devices. J Polym Sci Part B Polym Phy 53:1663–1673

    Article  CAS  Google Scholar 

  7. Shuhei Y, Seijung P, Suhee S, Mihee H, Joo YS, Youngeup J et al (2010) Synthesis and characterization of fluorene-carbazole and fluorene-phenothiazine copolymers with carbazole and oxadiazole pendants for organic light emitting diodes. Polymer 51:6174–6181

    Article  CAS  Google Scholar 

  8. Huajie C, Hui H, Zongfang T, ** S, Bin Z, Songting T (2010) Synthesis and photovoltaic erformances of 2,5-dioctyloxy-1,4-phenylenevinylene and terthiophene copolymers with di(p-tolyl)phenylamine and oxadiazole side groups. Eur Polym J 46(2010):673–680

    Google Scholar 

  9. Nam CY, Seok C, Dong HS (2003) Synthesis and optically acid-sensory properties of novel polyoxadiazole derivatives. Polymer 44:2143–2148

    Article  CAS  Google Scholar 

  10. Lee K, Hyong-JK Jae CC, **sang K (2007) Chemically and photochemically stable conjugated poly(oxadiazole) derivatives: a comparison with polythiophenes and poly(p-phenyleneethynylenes). Macromolecules 40:6457–6463

    Article  CAS  Google Scholar 

  11. Huda MK, Dolui SK (2010) Luminescence property of poly(1,3-bis(phenyl-1,3,4-oxadiazole))s containing polar groups in the main chain. J Lumin 130:2242–2246

    Article  CAS  Google Scholar 

  12. Yang NC, Chang IL, Jong KK, Dong HS (2004) Dependence of optical properties on the preparation methods of poly[(9,9′-dialkylfluorene- 2,7-diyl)-alt-(1,3,4-oxadiazole-2,5-diyl)]. J Appl Polym Sci 92:3112–3118

    Article  CAS  Google Scholar 

  13. Marks TJ, Ratner MA (1995) Design, synthesis and properties of molecule- based assemblies based with large second-order optical nonlinearities. Angew Chem Int Ed Engl 34:155–173

    Article  CAS  Google Scholar 

  14. Heddi M, Guy CB, Gary DP (1996) The effects of surface layers on third harmonic generation from solution of nematogenic polymer. J Polym Sci Part B Polym Phys 34:925–938

    Google Scholar 

  15. Zhongan L, Gui Y, Zhen L, Yunqi L, Cheng Y, **gui Q (2008) New second order nonlinear optical polymers containing the same isolation groups: optimized syntheses and nonlinear optical properties. Polymer 49:901–913

    Article  CAS  Google Scholar 

  16. Sona N, Anshad A, Sreejesh PR, Krishnapillai S, Cheranellore SK, Rani J (2015) Theoretical and experimental investigations on the photoconductivity and nonlinear optical properties of donor-acceptor pi-conjugated copolymer, poly(2,5-(3,4-ethylenedioxythiophene)-alt-2,7-(9,9-dioctylfluorene)). RSC Adv 5:8657–8668

    Article  CAS  Google Scholar 

  17. Chao G, Shaojun Q, Weisong D, Qun L, Hongcai W, **aozeng L, Hongyan G (2010) Enhanced third-order nonlinear optical property of poly(3-decayl)thiophene films modified by N+ ion implantation. Synth Metal 160:2175–2179

    Article  CAS  Google Scholar 

  18. Bass M, Enoch JM, Van Stryland EW, Wolfe WL (2001) Handbooks of optics IV-fiber optics and nonlinear optics. McGraw-Hill, New York

    Google Scholar 

  19. Guo Y, Kao CK, Li EH, Chiang KS (2002) Nonlinear photonics. Springer, Berlin

    Google Scholar 

  20. Massimiliano L, Luisa P (2009) New photosetting NLO active thiophenes with enhanced optical stability. Eur Polym J 45:1118–1126

    Article  CAS  Google Scholar 

  21. Wenbo W, Qi H, Cheng Z, Cheng Y, **gui Q, Zhen L (2013) Second-order nonlinear (NLO) optical polymers containing perfluoroaromatic rings as isolation groups with Ar/ArF self-assembly effect: enhanced NLO coefficient and stability. Polymer 54(2013):5564–5655

    Google Scholar 

  22. Ru S, Yue-TL Bao-LY, Jian-ML **ng-ZW, Ying-LS Jian-FG (2014) Third-order nonlinear optical properties of the poly(methyl methacrylate)-phenothiazinium dye hybrid thin films. Thin Solid Films 551:153–157

    Article  CAS  Google Scholar 

  23. Jainez Anlauf S, Wedel A (2001) New n-type rigid rod full aromatic poly(1,3,4-oxadiazole)s and their application in organic devices. Synth Metal 122:11

    Article  Google Scholar 

  24. Michael G, Peter S, Martin M, Wolfgang B (1997) Polymethacrylate with pendant oxadiazole units synthesis and application in organic LEDs. Macromolecules 30:6042–6046

    Article  Google Scholar 

  25. Hutchings DC, Sheik-Bahae M, Hagan DJ, Van Stryland EW (1992) Kramers-Kronig relation in nonlinear optica. Opt Quantum Electron 24:1–30

    Article  CAS  Google Scholar 

  26. Bayram G (2015) Optical properties of poly[2-methoxy-5-(3′-dimethyloctyloxy)-1,4-phenylenevinylene] light-emitting polymer solutions: effects of molarities and solvents. Polym Bull 72:3241–3267

    Article  CAS  Google Scholar 

  27. Joo HK (2008) Synthesis and electro-optical properties of poly(p-phenylenevinylene) derivative with conjugated 1,3,4-oxadiazole pendant and its AC electroluminescence. Synth Metal 158:1028–1036

    Article  CAS  Google Scholar 

  28. Joseph RL (2006) Principles of fluorescence spectroscopy. Springer, Baltimore

    Google Scholar 

  29. Hensema ER, Sena MER, Mulder MHV, Smolders CA (1994) Synthesis and properties of related polyoxadiazoles and polytriazoles. J Polym Sci Part A Polym Chem 32:527–537

    Article  CAS  Google Scholar 

  30. Jianfu D, Micheal D, Gilles R, Jacques R (2005) Synthesis and characterization of alternating copolymers of fluorene and oxadiazole. Macromolecules 32:3474–3483

    Google Scholar 

  31. Nimisha K, Shiju E, Chandrasekharan K, Unnikrishnan G (2016) Synthesis, characterization, and fine tuning of optical properties of soluble π-conjugated system with nito-phenyl-activated 1,3,4-oxadiazole unit. J Mater Sci 51:4748–4761

    Article  CAS  Google Scholar 

  32. Landfester K (2009) Miniemulsion polymerization and the structure of polymer and hybrid nanoparticles. Angew Chem Int Ed 48:4488–4507

    Article  CAS  Google Scholar 

  33. Sahan DP, Stephen GU (2017) Systematic investigation of π–π interactions in near edge X-ray fine structure (NEXAFS) spectroscopy of paracyclophanes. J Phys Chem A. doi:10.1021/acs.jpca.7b03823

    Article  Google Scholar 

  34. Tiziana C, Raffaele T, Andrew PM, Micheal DW (2005) Investigation of the excited state absorption of a Ru dioxoline complex by the Z-scan technique. J Chem Phys 122:154507–154512

    Article  CAS  Google Scholar 

  35. Saadeh H, Yu D, Wang LM, Yu LP (1999) Highly stable, functionalized polyimides for second order nonlinear optics. J Mater Chem 9:1865–1873

    Article  CAS  Google Scholar 

  36. Sona N, Sreejesh PR, Aby CP, Sebastian M, Krishna PS, Cheranellore SK, Rani J (2015) Third-order nonlinear optical properties of 3,4-ethylenedioxythiophene copolymers with chalcogenadiazole acceptors. New J Chem 39:2795–2806

    Article  CAS  Google Scholar 

  37. Mengxia L, Wen W, Luying L, Shuhui Y, Qidan L (2017) Synthesis of D-A low-bandgap polymer-based thieno[3,4-b]pyrazine and benzo[1,2-b:4,5-b′]dithiophene for polymer solar cells. Polym Bull 74:603–614

    Article  CAS  Google Scholar 

Download references

Acknowledgements

NK gratefully acknowledges financial support from Council of Scientific Research (Council of Scientific and Industrial Research, New Delhi, India) fellowship in Chemical Sciences.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Unnikrishnan Gopalakrishnapanicker.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Kaippamangalath, N., Gopalakrishnapanicker, U., Shiju, E. et al. Investigation and fine-tuning of optoelectrical features of tertiary aminophenyl-activated poly(1,3,4-oxadiazole) conjugated system. Polym. Bull. 75, 3069–3087 (2018). https://doi.org/10.1007/s00289-017-2190-0

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00289-017-2190-0

Keywords

Navigation