Abstract
In this study, the effect of the elliptical shape on the modified Savonius wind turbine, consisting of the original semicircular profile and an additional elliptical part, is investigated. The geometry configuration of this elliptical profile is determined by the non-dimension parameter R* and the angle α. The effect of the parameters on the rotor performance is numerically analyzed using the commercial software Ansys Fluent 2020R2. As a result, both R* and α plays an important role in the performance of the rotor. In that, the rotor shows the best efficiency at R* = 0.55 and α = 90°. For which the power coefficient improves up to 99.1% compared to Blackwell’s conventional rotor configuration at a tip speed ratio (TSR) 1.4 before decreasing at a higher TSRs.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Savonius, S.J.: The S-rotor and its application. Mech. Eng. 53, 333–338 (1993)
Ishugah, T.F., Li, Y., Wang, R.Z., Kiplagat, J.K.: Advances in wind energy resource exploitation in urban environment: a review. Renew. Sustain. Energy Rev. 37, 613–626 (2014)
Akwa, J.V., Vielmo, H.A., Petry, A.P.: A review on the performance of Savonius wind turbines. Renew. Sustain. Energy Rev. 16(5), 3054–3064 (2012)
Altan, B.D., Atılgan, M.: An experimental and numerical study on the improvement of the performance of Savonius wind rotor. Energy Convers. Manage. 49(12), 3425–3432 (2008)
Mohamed, M.H., Janiga, G., Pap, E., Thevenin, D.: Optimal blade shape of a modified Savonius turbine using an obstacle shielding the returning blade. Energy Conserv. Manage. 52, 236–424 (2011)
El-Askary, W.A., Nasef, M.H., Abdel-Hamid, A.A., Gad, H.E.: Harvesting wind energy for improving the performance of Savonius rotor. J. Wind Eng. Indust. Appl. 139, 8–15 (2015)
Kang, C., Opare, W., Pan, C., Zou, Z.: Upstream flow control for Savonius rotor under various operation conditions. Energy 11(6), 1482 (2018)
Al-Faruk, A., Sharifian, A.: Blade overlap and blade angle on the aerodynamic coefficients in vertical axis swirling type Savonius wind turbine. In: 19th Australasian Fluid Mechanics Conference, Melbourne, Australia (2014)
Saeed, H.A.H., Elmekawy, A.M.N., Kassab, S.Z.: Numerical study of improving Savonius turbine power coefficient by various blade shapes. Alex. Eng. J. 58, 429–441 (2019)
Kollmann, T.: In: Kollmann, J.T., Kuckertz, A., Stöckmann, C. (eds.) Gabler Kompakt-Lexikon Unternehmensgründung, pp. 223–224. Springer, Wiesbaden (2021). https://doi.org/10.1007/978-3-658-30901-5_10
Chan, C.M., Bai, H.L., He, D.Q.: Blade shape optimization of the Savonius wind turbine using a genetic algorithm. Appl. Energy 213, 148–157 (2018)
Tian, W., Mao, Z., Zhang, B., Li, Y.: Shape optimization of a Savonius wind rotor with different convex and concave sides. Renew. Energy 117, 287–299 (2018)
Kamoji, M.A., Kedare, S.B., Prabhu, S.V.: Experimental investigations on modified Savonius rotor. Appl. Energy 86(7–8), 1064–1073 (2009)
Kacprzak, K., Liskiewicz, G., Sobczak, K.: Numerical investigation of conventional and modified Savonius wind turbines. Renew. Energy 60, 578–585 (2013)
Roy, S., Saha, U.K.: Review on the numerical investigations into the design and development of Savonius wind rotors. Renew. Sustain. Energy Rev. 24, 73–83 (2015)
Lee, J.-H., Lee, Y.-T., Lim, H.-C.: Effect of twist angle on the performance of Savonius wind turbine. Renew. Energy 89, 231–244 (2016)
Hassanzadeh, R., Mohammaddnejad, M., Mostafavi, S.: Comparision of various blade profile in a two-blade conventional Savonius wind turbine. ASME J. Energy Resour. Technol. 143(2), 021301 (2021)
Laws, P., Saini, J.S., Kumar, A., Mitra, S.: Improvement in Savonius wind turbines efficiency by modification of blade design-a numerical study. ASME J. Energy. Resour. Technol 142(6), 061303 (2020)
Abraham, J.P., Mowry, G.S., Plourde, B.P., Sparrow, E.M., Minkowycz, W.J.: Numerical simulation of fluid flow around a vertical-axis turbine. J. Renew. Sustain. Energy 3, 033109 (2011). https://doi.org/10.1063/1.3588037
Borzuei, D., Moosavian, S.F., Farajollahi, M.: On the performance enhancement of the three-blade Savonius wind turbine implementing opening valve. ASME J. Energy. Resour. Technol 143(5), 051301 (2021)
Mahmoud, N.H., El-Haroun, A.A., Wahba, E., Nasef, M.H.: An experimental study on improvement of Savoniusrotor performance. Alex. Eng. J. 51, 19–25 (2012)
Blackwell, B.F., Sheldahl, R.E., Feltz, L.V.: Wind tunnel performance data for two and three-bucket Savonius rotors. In: SAND76-01321 UC-60, National Tech. Information Service. U. S. Dept. Commerce, Springfield (1977)
Yang, M.-H., Huang, G.-M., Yeh, R.-H.: Performance investigation of an innovative vertical axis turbine consisting of deflectable blades. Appl. Energy 179, 875–887 (2016)
Ansys Fluent 12.0 Theory Manual
Anh D.L., Minh B.D., Tam H.V.: A Modified Novel Blade Shape for Improving the Efficiency of Savonius Wind Turbine for Urban Application (under review)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Duc, M., Le, A.D. (2022). Effect of the Elliptical Shape on the Performance of the Modified Savonius Wind Turbine. In: Le, AT., Pham, VS., Le, MQ., Pham, HL. (eds) The AUN/SEED-Net Joint Regional Conference in Transportation, Energy, and Mechanical Manufacturing Engineering. RCTEMME 2021. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-19-1968-8_32
Download citation
DOI: https://doi.org/10.1007/978-981-19-1968-8_32
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-19-1967-1
Online ISBN: 978-981-19-1968-8
eBook Packages: EngineeringEngineering (R0)