Abstract
Heat transfer enhancement and hence performance of solar air heaters can be improved by absorbing maximum amount of solar insolation. Absorption rate in solar air heater is increased when it is oriented all the time in perpendicular direction to solar insolation. Hence, inclination of solar air heater along with other geometrical and operating parameters plays an important role to decide its thermal performance. In the present work, a double-pass packed bed solar air heater is experimentally tested to know the effect of its inclination to solar insolation on its thermal performance. Experiments are conducted at different mass flow rate of air in the range of 0.038–0.0508 kg/s and at different inclination of solar air heater in the range of 5°–25° to the horizontal surface. It was found that efficiency of solar air heater is lower at 5° and 10° inclinations for all mass flow rates of air. Efficiency increased and reaches to its maximum value for 15° and 20° inclinations of the solar air heater, and it decreases with further increase in inclination to 25° at all mass flow rates of air.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Rajaseenivasan T, Srinivasan S, Srithar K (2015) Comprehensive study on solar air heater with circular and V-type turbulators attached on absorber plate. Energy 88:863–873
Mahmood AJ, Aldabbagh LY, Egelioglu F (2015) Investigation of single and double pass solar air heater with transverse fins and a package wire mesh layer. Energy Convers Manage 89:599–607
Lakshmi DVN, Layek A, Muthu Kumar P (2017) Performance analysis of trapezoidal corrugated solar air heater with sensible heat storage material. Energy Procedia 109:463–470
Varun, Saini RP, Singal SK (2008) Investigation of thermal performance of solar air heater having roughness elements as a combination of inclined and transverse ribs on the absorber plate. Renew Energy 33:1398–1405
Varshney L, Saini JS (1998) Heat transfer and friction factor correlations for rectangular solar air heater duct packed with wire mesh screen matrices. Sol Energy 62(4):255–262
Mittal MK, Varshney L (2006) Optimal thermos-hydraulic performance of a wire mesh packed solar air heater. Sol Energy 80:1112–1120
Prasad BN, Saini JS (1988) Effect of artificial roughness on heat transfer and friction factor in a solar air heater. Sol Energy 41(6):555–560
Lalji MK, Sarviya RM, Bhagoria JL (2012) Exergy evaluation of packed bed solar air heater. Renew Sustain Energy Rev 16:6262–6267
Naphon P (2005) Effect of porous media on the performance of the double-pass flat plate solar air heater. Int Commun Heat Mass Transfer 32:140–150
Lal Singh P, Deshpandey SD, Jena PC (2015) Thermal performance of packed bed heat storage system for solar air heaters. Energy Sustain Develop 29:112–117
Dhiman P, Thakur NS., Chauhan SR (2012) Thermal and thermos-hydraulic performance of counter and parallel flow packed bed solar air heaters. Renew Energy 46:259–268
Verma P, Varshney L (2015) Parametric investigation on thermo-hydraulic performance of wire screen matrix packed solar air heater. Sustain Energy Technol Assess 10:40–52, (2015)
Sopian K, Alghoul MA, Alfegi EM, Sulaiman MY, Musa EA (2009) Evaluation of thermal efficiency of double pass solar collector with and without porous media. Renew Energy 34(3):640–645
Thakur NS, Saini JS, Solanki SC (2003) Heat transfer and friction factor correlations for packed bed solar air heater for a low porosity system. Sol Energy 74:319–329
Paul B, Saini JS (2004) Optimization of bed parameters for packed bed solar energy collection system. Renew Energy 29:1863–1876
Ho C-D, Lin C-S, Chuang Y-C, Chao C-C (2013) Performance improvement of wire mesh packed double-pass solar air heaters with external recycle. Renew Energy 57:479–489
Fath HES (1995) Thermal performance of a simple design solar air heater with built in thermal energy storage system. Renew Energy 6:1033–1039
Enibe SO (2003) Thermal analysis of a natural circulation solar air heater with phase change material energy storage. Renewable Energy 28(14):2269–2299
Aboul-Enein S, El-Sebaii AA, Ramadan MRI, El-Gohary HG (2000) Parametric study of a solar air heater with and without thermal storage for solar drying applications. Renewable energy 21(3–4):505–522
Alkilani MM, Sopian K, Alghoul MA, Sohif M, Ruslan MH (2011) Review of solar air collectors with thermal storage units. Renew Sustain Energy Rev 15(3):1476–1490
da Cunha JP, Eames P (2016) Thermal energy storage for low and medium temperature applications using phase change materials—a review. Appl Energy 177:227–238
Pielichowska K, Pielichowski K (2014) Phase change materials for thermal energy storage. Prog Mater Sci 65:67–123
Murali TSVV, Mohan MJK (2019) Thermal performance analysis of artificially roughened solar air heater with ribs: a CFD analysis. Int. J. Recent Technol Eng (Scopus Indexed with IF 0.03) 7(6S4):33–38
Jakkamputi LP, Mandapati MJK (2016) Improving the performance of jaggery making unit using solar energy. Perspect Sci (Indexed by Directory of Open Access Journals, DOAJ) 8:146–150
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Rahaman, S.A., Eswar, T., Reddy, S.J., Mohan Jagadeesh Kumar, M. (2020). Experimental Analysis on Thermal Performance of a Solar Air Heater at Different Angular Positions. In: Voruganti, H., Kumar, K., Krishna, P., **, X. (eds) Advances in Applied Mechanical Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-15-1201-8_8
Download citation
DOI: https://doi.org/10.1007/978-981-15-1201-8_8
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-1200-1
Online ISBN: 978-981-15-1201-8
eBook Packages: EngineeringEngineering (R0)