Abstract
This chapter is intended to present the basic concept of roll bonding (RB) and accumulative roll bonding (ARB) of light-weight ductile metals. For this purpose, a discussion on previous research works on RB and ARB has been incorporated in this chapter. The general mechanisms of joining after rolling and several applications of RB and ARB have also been discussed. In the present study, an investigation on influence of various parameters on joint strength was conducted. Preheat temperature and percentages of thickness reduction are found to influence joint strength in a significant manner. The influence of annealing temperature and annealing time on mechanical properties of roll-bonded products in terms of controlling parameters has also been discussed here. The significant influence of preheat temperature and corresponding thickness reduction on the bond strength has been thoroughly discussed with a mechanism of peel testing. An attempt has been made to establish the mechanism behind failure along the joining line during peel testing of bond strength of solid-state welding through rolling.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Calvo FA, Urena A, Gomez De Salazar JM, Molleda F, Criado AJ (1988) Solid-state transformations during diffusion bonding of copper to iron. J Mater Sci 23:1231–1236
Chen Z, Luo T, Hang T, Li M, Hu A (2012) Low-temperature solid state bonding of Sn and Nickel micro cones for micro interconnection. ECS Solid State Lett 1:7–12
Cooper DR, Allwood JM (2014) The influence of diffusion mechanisms in aluminium solid-state welding processes. In: Procedia Engineering 11th International Conference on Technology of Plasticity, ICTP 2014
Costa ALM, Reis ACC, Kestens L, Andrade MS (2006) Ultra grain refinement and hardening of IF-steel during accumulative roll-bonding. Mater Sci Eng A 406:279–285
Eizadjou M, Danesh Manesh H, Janghorban K (2009) Mechanism of warm and cold roll bonding of aluminum alloy strips. Mater Des 30:4156–4161
Hong-zhi Y (2006) Key factors for warm rolled bond of 6111-aluminium strip. Trans Nonferrous Met Soc China 16:84–90
Jamaati R, Toroghinejad MR (2010) Effect of friction, annealing conditions and hardness on the bond strength of Al/Al strips produced by cold roll bonding process. Mater Des 31:4508–4513
Kazakov NF (1985a) An outline of diffusion bonding in vacuum. Diffus Bond Mater 10–16
Kazakov NF (1985b) A theory of diffusion bonding. Diffus Bond Mater 17–48
Kazakov NF (1985c) Principal bonding variables and recommended. Procedures for diffusion bonding in vacuum. Diffus Bond Mater 49–70
Kim SH, Kim HW, Euh K, Kang JH, Cho JH (2012) Effect of wire brushing on warm roll bonding of 6XXX/5XXX/6XXX aluminum alloy clad sheets. Mater Des 35:290–295
Klomp JT, Van De Ven AJC (1980) Parameters in solid-state bonding of metals to oxide materials and the adherence of bonds. J Mater Sci 15:2483–2488
Krallics G, Lenard JG (2004) An examination of the accumulative roll-bonding process. J Mater Process Technol 152:154–161
Lemus-Ruiz J, Ceja-Cardenas L, Bedolla-Becerril E, Lopez-Morelos VH (2011) Production, characterization, and mechanical evaluation of dissimilar metal/ceramic joints. Nanocomposites Unique Prop Appl Med Ind. InTech 205–224
Liu CY, Wang Q, Jia YZ, **g R, Zhang B, Ma MZ, Liu RP (2012) Microstructures and mechanical properties of Mg/Mg and Mg/Al/Mg laminated composites prepared via warm roll bonding. Mater Sci Eng A 556:1–8
Madaah-Hosseini HR, Kokabi AH (2002) Cold roll bonding of 5754-aluminum strips. Mater Sci Eng A 335:186–190
Manesh DH, Taheri AK (2003) The effect of annealing treatment on mechanical properties of aluminum clad steel sheet. Mater Des 24:617–622
Manesh HD, Taheri AK (2004) Study of mechanisms of cold roll welding of aluminum alloy to steel strip. Mater Sci Technol 20:1064–1068
Masoumi M, Emadoddinm E (2013) Interface characterization and formability of two and three-layer composite sheets manufactured by roll bonding. Mater Des 44:392–396
Milner JL, Abu-Farha F, Bunget C, Kurfess T, Hammond VH (2013) Grain refinement and mechanical properties of CP-Ti processed by warm accumulative roll bonding. Mater Sci Eng A 56:109–117
Moore JJ, Wilson DV, Roberts WT (1981) Evaluation of formable light metal-alloy steel composites. Mater Sci Eng 48:123–136
Saito Y, Tsuji N, Utsunomiya H, Sakai T, Hong RG (1998) Ultra-fine grained bulk aluminum produced by accumulative roll-bonding (ARB) process. Scripta Mater 39:1221–1227
Saito Y, Utsunomiya H, Tsuji N, Sakai T (1999) Novel ultra-high straining process for bulk materials development of the accumulative roll-bonding (ARB) process. Acta Mater 47:579–583
Shaarbaf M, Toroghinejad MR (2008) Nano-grained copper strip produced by accumulative roll bonding process. Mater Sci Eng A 473:28–33
Shabani A, Toroghinejad MR, Shafyei A (2012) Effect of post-rolling annealing treatment and thickness of nickel coating on the bond strength of Al–Cu strips in cold roll bonding process. Mater Des 40:212–220
Sheng LY, Yang F, ** TF, Lai C, Ye HQ (2011) Influence of heat treatment on interface of Cu/Al bimetal composite fabricated by cold rolling. Compos B 42:1468–1473
Su I, Lu C, Tieu K, Deng G (2013) Annealing behavior of accumulative roll bonding processed aluminum composites. Steel Res Int 84:1241–1245
Taheri AK, Maccagno TM, Jonas JJ (1995) Dynamic strain aging and the wire drawing of low carbon steel rods. ISIJ Int 35:1532–1540
Tolaminejad B, Arabi H (2008) A study of roll-bonding MS90 alloy to steel utilizing chromized interlayer. Iran J Sci Technol Trans B Eng 32:631–640
Toroghinejad MR, Ashrafizadeh F, Jamaati R (2013) On the use of accumulative roll bonding process to develop nanostructured aluminum alloy 5083. Mater Sci Eng A 561:145–151
Tsuji N, Saito Y, Utsunomiya H, Tanigawa S (1999) Ultra-fine grained bulk steel produced by accumulative roll-bonding (ARB) process. Scripta Mater 40:795–800
Wright PK, Snow DA, Tay CK (1978) Interfacial conditions and bond strength in cold pressure welding by rolling. Met Technol 444:24–31
**ng ZP, kang SB, Kim HW (2002) Structure and properties of AA3003 alloy produced by accumulative roll bonding process. J Mater Sci 37:717–722
Yoda R, Shibata K, Morimitsu T, Terada D, Tsuji N (2011) Formability of ultrafine-grained interstitial-free steel fabricated by accumulative roll-bonding and subsequent annealing. Scripta Mater 65:175–178
Zhang BW, Bay N (1997) Cold welding experimental the surface preparation investigation methods. Weld Res Suppl 326s–330s
Zhang XP, Yang TH, Castagne S, Gu CF, Wang JT (2011) Proposal of bond criterion for hot roll bonding and its application. Mater Des 32:2239–2245
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 Springer India
About this paper
Cite this paper
Sardar, S., Mandal, A., Pal, S.K., Singh, S.B. (2015). Solid-State Joining by Roll Bonding and Accumulative Roll Bonding . In: Narayanan, R., Dixit, U. (eds) Advances in Material Forming and Joining. Topics in Mining, Metallurgy and Materials Engineering. Springer, New Delhi. https://doi.org/10.1007/978-81-322-2355-9_18
Download citation
DOI: https://doi.org/10.1007/978-81-322-2355-9_18
Published:
Publisher Name: Springer, New Delhi
Print ISBN: 978-81-322-2354-2
Online ISBN: 978-81-322-2355-9
eBook Packages: EngineeringEngineering (R0)