Abstract
The quest for the development of innovative materials having zero impact with high performance at affordable costs to meet the basic human and society demands results a dynamic composite materials. Green or biocomposites regarded as a high-performance or ‘advanced’ fourth generation engineered composite materials that are comparatively better and attractive in terms of environmentally friendly, composability and complete degradability of end use products. The reinforcement of renewable and environment-friendly plant based ‘lignocellulosic’ fibers with bio-based polymeric matrix (plastics) is the only ways to fabricate the green composites or to make them fully greener materials. Green composites offer a significant environmental key for both food and non-food market including the aerospace, automotive, decking and for others variety of structural applications over the past decades because of their relatively higher specific modulus and strength compared to metals. Developed bio-material undoubtedly delivers greater impact on the world economy by develo** energy saving products for the improvement of life quality. Present study is designed to deliver an outline of the comprehensive recent research studies and works reported on sustainable “green” friendly biocomposites, focusing the concern on biopolymers, natural fibers, composite processing and their diverse structural applications. Currently, green composites considered as one of the emerging innovative products in materials and polymer composite science to expand the commercial application in the sectors ranging from packaging to the constructional industry.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Alamri H, Low IM (2013) Effect of water absorption on the mechanical properties of nanoclay filled recycled cellulose fibre reinforced epoxy hybrid nanocomposites. Compos Part A Appl Sci Manuf 44:23–31. doi:10.1016/j.compositesa.2012.08.026
Avérous LBN (2004) Biocomposites based on plasticized starch: thermal and mechanical behaviour. Carbohydr Polym 56:111–122. doi:10.1016/j.carbpol.2003.11.015
Beckermann GW, Pickering KL (2008) Engineering and evaluation of hemp fibre reinforced polypropylene composites: fibre treatment and matrix modification. Compos Part A Appl Sci Manuf 39:979–988. doi:10.1016/j.compositesa.2008.03.010
Beg MDH, Pickering KL (2008) Mechanical performance of Kraft fibre reinforced polypropylene composites: Influence of fibre length, fibre beating and hygrothermal ageing. Compos Part A Appl Sci Manuf 39:1748–1755. doi:10.1016/j.compositesa.2008.08.003
Binhussain M a, El-Tonsy MM (2013) Palm leave and plastic waste wood composite for out-door structures. Constr Build Mater 47:1431–1435. doi:10.1016/j.conbuildmat.2013.06.031
Blasques JP, Berggreen C, Andersen P (2010) Hydro-elastic analysis and optimization of a composite marine propeller. Mar Struct 23:22–38. doi:10.1016/j.marstruc.2009.10.002
Bos HL, Müssig J, van den Oever MJ a (2006) Mechanical properties of short-flax-fibre reinforced compounds. Compos Part A Appl Sci Manuf 37:1591–1604. doi:10.1016/j.compositesa.2005.10.011
Brunner AJ (2015) Polymer composites in the aerospace industry
Chen Y, Tshabalala M a, Gao J et al (2014) Thermal behavior of extracted and delignified pine wood flour. Thermochim Acta 591:40–44. doi:10.1016/j.tca.2014.06.012
Cheung HY, Ho MP, Lau KT et al (2009) Natural fibre-reinforced composites for bioengineering and environmental engineering applications. Compos Part B Eng 40:655–663. doi:10.1016/j.compositesb.2009.04.014
Dicker MPM, Duckworth PF, Baker AB et al (2014) Green composites: a review of material attributes and complementary applications. Compos Part A Appl Sci Manuf 56:280–289. doi:10.1016/j.compositesa.2013.10.014
Džalto J, Medina L, Mitschang P (2014) Volumetric interaction and material characterization of flax/furan bio-composites. KMUTNB Int J Appl Sci Technol 7:11–21. doi:10.14416/j.ijast.2014.01.004
Fowler PA, Hughes JM, Elias RM (2006) Biocomposites: technology, environmental credentials and market forces. J Sci Food Agric 1789:1781–1789. doi:10.1002/jsfa
García-García D, Carbonell a, Samper MD et al (2015) Green composites based on polypropylene matrix and hydrophobized spend coffee ground (SCG) powder. Compos Part B Eng 78:256–265. doi:10.1016/j.compositesb.2015.03.080
Gejo G, Kuruvilla J, Boudenne A, Sabu T (2010) Recent advances in green composites. Key Eng Mater 425:107–166. doi:10.4028/www.scientific.net/KEM.425.107
Ghaffarianhoseini A, Dahlan ND, Berardi U et al (2013) Sustainable energy performances of green buildings: a review of current theories, implementations and challenges. Renew Sustain Energy Rev 25:1–17. doi:10.1016/j.rser.2013.01.010
Gurunathan T, Mohanty S, Nayak SK (2015) A review of the recent developments in biocomposites based on natural fibres and their application perspectives. Compos Part A Appl Sci Manuf 77:1–25. doi:10.1016/j.compositesa.2015.06.007
Harmsen PFH, Hackmann MM, Bos HL (2012) green building blocks for bio-based plastics. Biofuels, Bioprod Biorefin 6:246–256. doi:10.1002/bbb
Heimbs S, Strobl F, Middendorf P, Guimard JM (2010) Composite crash absorber for aircraft fuselage applications. WIT Trans Built Environ 113:3–14. doi:10.2495/SU100011
John MJ, Thomas S (2008) Biofibres and biocomposites. Carbohydr Polym 71:343–364. doi:10.1016/j.carbpol.2007.05.040
Koronis G, Silva A, Fontul M (2013) Green composites: a review of adequate materials for automotive applications. Compos Part B Eng 44:120–127. doi:10.1016/j.compositesb.2012.07.004
La Rosa AD, Recca A, Gagliano A et al (2014) Environmental impacts and thermal insulation performance of innovative composite solutions for building applications. Constr Build Mater 55:406–414. doi:10.1016/j.conbuildmat.2014.01.054
Le Duigou A, Davies P, Baley C (2010) Interfacial bonding of Flax fibre/Poly(L-lactide) bio-composites. Compos Sci Technol 70:231–239. doi:10.1016/j.compscitech.2009.10.009
Markarian J (2008) Outdoor living space drives growth in wood-plastic composites. Plast Addit Compd 10:20–25. doi:10.1016/S1464-391X(08)70131-4
Milan S, Christopher T, Jappes JW, Siva I (2005) Investigation on mechanical properties and chemical treatment of sea grass fiber reinforced polymer composites. J Chem Pharm Sci 974:72–77
Mooney BP (2009) The second green revolution? Production of plant-based biodegradable plastics. Biochem J 418:219–232. doi:10.1042/BJ20081769
Mülhaupt R (2013) Green polymer chemistry and bio-based plastics: dreams and reality. Macromol Chem Phys 214:159–174. doi:10.1002/macp.201200439
Netravali AN, Chabba S (2003) Composites get greener. Mater Today 6:22–29. doi:10.1016/S1369-7021(03)00427-9
Niaounakis M (2014) Biopolymers: processing and products, 1st edn. Elsevier, UK
Nickel J, Riedel U (2003) Activities in biocomposites. Mater Today 6:44–48. doi:10.1016/S1369-7021(03)00430-9
Ortega JV, Renehan AM, Liberatore MW, Herring AM (2011) Physical and chemical characteristics of aging pyrolysis oils produced from hardwood and softwood feedstocks. J Anal Appl Pyrolysis 91:190–198. doi:10.1016/j.jaap.2011.02.007
Reddy RL, Reddy VS, Gupta GA (2013) Study of bio-plastics as green & sustainable alternative to plastics. Int J Emerg Technol Adv Eng 3:82–89
Rwawiire S, Tomkova B, Militky J et al (2015) Development of a biocomposite based on green epoxy polymer and natural cellulose fabric (bark cloth) for automotive instrument panel applications. Compos Part B Eng 81:149–157. doi:10.1016/j.compositesb.2015.06.021
Saba N, Tahir P, Jawaid M (2014) A review on potentiality of nano filler/natural fiber filled polymer hybrid composites. Polym (Basel) 6:2247–2273. doi:10.3390/polym6082247
Saenghirunwattana P, Noomhorm A, Rungsardthong V (2014) Mechanical properties of soy protein based “green” composites reinforced with surface modified cornhusk fiber. Ind Crops Prod 60:144–150. doi:10.1016/j.indcrop.2014.06.010
Sallih N, Lescher P, Bhattacharyya D (2014) Factorial study of material and process parameters on the mechanical properties of extruded kenaf fibre/polypropylene composite sheets. Compos Part A Appl Sci Manuf 61:91–107. doi:10.1016/j.compositesa.2014.02.014
Satyanarayana KG (2015) Recent developments in green composites based on plant fibers-preparation, structure property studies. J Bioprocess Biotech. doi:10.4172/2155-9821.1000206
Scala JL, Wool RP (2005) Rheology of chemically modified triglycerides. J Appl Polym Sci 95:774–783. doi:10.1002/app.20846
Signori F, Pelagaggi M, Bronco S, Righetti MC (2012) Amorphous/crystal and polymer/filler interphases in biocomposites from poly(butylene succinate). Thermochim Acta 543:74–81. doi:10.1016/j.tca.2012.05.006
Taşdemır M, Biltekin H, Caneba GT (2009) Preparation and characterization of LDPE and PP-Wood fiber composites. J Appl Polym Sci 112:3095–3102. doi:10.1002/app.29650
Terzopoulou ZN, Papageorgiou GZ, Papadopoulou E et al (2015) Green composites prepared from aliphatic polyesters and bast fibers. Ind Crops Prod 68:60–79. doi:10.1016/j.indcrop.2014.08.034
Wu C-S, Liao H-T (2014) The mechanical properties, biocompatibility and biodegradability of chestnut shell fibre and polyhydroxyalkanoate composites. Polym Degrad Stab 99:274–282. doi:10.1016/j.polymdegradstab.2013.10.019
Wu M, Shuai H, Cheng Q, Jiang L (2014) Bioinspired green composite lotus fibers. Angew Chemie Int Ed 53:3358–3361. doi:10.1002/anie.201310656
**e Y, Hill CAS, **ao Z et al (2010) Silane coupling agents used for natural fiber/polymer composites: a review. Compos. Part A Appl. Sci. Manuf. 41:806–819
Yu T, Jiang N, Li Y (2014) Study on short ramie fiber/poly(lactic acid) composites compatibilized by maleic anhydride. Compos Part A Appl Sci Manuf 64:139–146. doi:10.1016/j.compositesa.2014.05.008
Yudelson J (2010) What is a green building?
Zini E, Scandola M (2011) Green composites: an overview. Polym Compos 32:1905–1915. doi:10.1002/pc.21224
Acknowledgements
The authors also thankful to the Universiti Putra Malaysia for supporting this research study through Putra Grant Vot No. 9441501.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer International Publishing AG
About this chapter
Cite this chapter
Saba, N., Jawaid, M., Sultan, M.T.H., Alothman, O.Y. (2017). Green Biocomposites for Structural Applications. In: Jawaid, M., Salit, M., Alothman, O. (eds) Green Biocomposites. Green Energy and Technology. Springer, Cham. https://doi.org/10.1007/978-3-319-49382-4_1
Download citation
DOI: https://doi.org/10.1007/978-3-319-49382-4_1
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-49381-7
Online ISBN: 978-3-319-49382-4
eBook Packages: EnergyEnergy (R0)