Abstract
A review of recent literature on pool and flow boiling with a focus on improving the boiling process using enhanced surfaces is presented here. A discussion on the mechanisms for the reported improvements in boiling performance is also provided to help guide the design of enhanced surfaces. The key surface enhancements reported in the field of pool boiling have been aimed at (a) tuning surface wettability to promote enhanced nucleation of bubbles, (b) modifying surface morphology by structuring at the micro/nanoscale to enhance surface wettability and its wicking ability, and (c) varying surface thermal conductivity to delineate zones of liquid supply to the heated surface and nucleation of bubbles from the surface. The modification of surface wettability has been achieved via two methods: surfactants added to the operating fluid and hydrophobic coatings deposited on the heated surface. Surface micro/nanoscale morphology can be tailored via the use of surface structures including micropillar arrays, nanowire clusters, sintered particle wicks, microchannels, and hierarchical structures (i.e., a combination of various length scale structures to create a tier of structure size scales). In the area of flow or convective boiling, surface enhancements have focused on mitigating flow instabilities that plague microchannel two-phase flow. Specifically, inlet restrictors and artificial nucleation sites have been proposed (and demonstrated) to prevent upstream compressibility and explosive bubble growth instabilities. Microchannel flow boiling performance has also been improved by the incorporation of surface structures on the microscale and nanoscale, the former to promote capillary wicking and delayed dryout and the latter to increase the number nucleation sites in addition to promoting capillary wicking. In the chapter summary, a brief discussion is provided on the areas within these fields where opportunities exist to better understand the behavior in these systems and to create reliable solutions for industrial applications.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Adera S, Antao D, Raj R, Wang EN (2016) Design of micropillar wicks for thin-film evaporation. Int J Heat Mass Transf 101:280–294. https://doi.org/10.1016/j.ijheatmasstransfer.2016.04.107
Ahn HS, Jo HJ, Kang SH, Kim MH (2011) Effect of liquid spreading due to nano/microstructures on the critical heat flux during pool boiling. Appl Phys Lett 98(7):071908. https://doi.org/10.1063/1.3555430
Bankoff SG (1958) Entrapment of gas in the spreading of a liquid over a rough surface. AICHE J 4(1):24–26. https://doi.org/10.1002/aic.690040105
Bergles AE, Kandlikar SG (2005) On the nature of critical heat flux in microchannels. J Heat Transf 127(1):101–107. https://doi.org/10.1115/1.1839587
Betz AR, Xu J, Qiu H, Attinger D (2010) Do surfaces with mixed hydrophilic and hydrophobic areas enhance pool boiling? Appl Phys Lett 97(14):141909. https://doi.org/10.1063/1.3485057
Betz AR, Jenkins J, Kim C-JC, Attinger D (2013) Boiling heat transfer on superhydrophilic, superhydrophobic, and superbiphilic surfaces. Int J Heat Mass Transf 57(2):733–741. https://doi.org/10.1016/j.ijheatmasstransfer.2012.10.080
Brown WT Jr (1967) Study of flow surface boiling. Massachusetts Institute of Technology, Cambridge
Cai Q, Bhunia A (2012) High heat flux phase change on porous carbon nanotube structures. Int J Heat Mass Transf 55(21–22):5544–5551. https://doi.org/10.1016/j.ijheatmasstransfer.2012.05.027
Cai SQ, Bhunia A (2014) Characterization of phase change heat and mass transfers in Monoporous silicon wick structures. J Heat Transf 136(7):072001–072001. https://doi.org/10.1115/1.4027152
Cai Q, Chen C-L (2010) Design and test of carbon nanotube biwick structure for high-heat-flux phase change heat transfer. J Heat Transf 132(5):052403–052403. https://doi.org/10.1115/1.4000469
Cai Q, Chen Y-C (2011) Investigations of biporous wick structure dryout. J Heat Transf 134(2):021503–021503. https://doi.org/10.1115/1.4005099
Carey VP (2007) Liquid vapor phase change phenomena: an introduction to the thermophysics of vaporization and condensation processes in heat transfer equipment, 2nd edn. Taylor & Francis, New York
Cassie ABD (1948) Contact angles. Discuss Faraday Soc 3(0):11–16. https://doi.org/10.1039/df9480300011
Cassie ABD, Baxter S (1944) Wettability of porous surfaces. Trans Faraday Soc 40(0):546–551. https://doi.org/10.1039/tf9444000546
Chen R, M-C L, Srinivasan V, Wang Z, Cho HH, Majumdar A (2009) Nanowires for enhanced boiling heat transfer. Nano Lett 9(2):548–553. https://doi.org/10.1021/nl8026857
Cheng L, Mewes D, Luke A (2007) Boiling phenomena with surfactants and polymeric additives: a state-of-the-art review. Int J Heat Mass Transf 50(13–14):2744–2771. https://doi.org/10.1016/j.ijheatmasstransfer.2006.11.016
Cho HJ, Sresht V, Blankschtein D, Wang EN (2013) Understanding enhanced boiling with Triton X surfactants. Paper presented at the ASME heat transfer summer conference, Minneapolis
Cho HJ, Mizerak JP, Wang EN (2015) Turning bubbles on and off during boiling using charged surfactants. Nat Commun 6:8599. https://doi.org/10.1038/ncomms9599
Chu K-H, Enright R, Wang EN (2012) Structured surfaces for enhanced pool boiling heat transfer. Appl Phys Lett 100(24):241603. https://doi.org/10.1063/1.4724190
Chu K-H, Joung YS, Enright R, Buie CR, Wang EN (2013) Hierarchically structured surfaces for boiling critical heat flux enhancement. Appl Phys Lett 102(15):151602. https://doi.org/10.1063/1.4801811
Clark HB, Strenge PS, Westwater JW (1959) Active sites for nucleate boiling. Chem Eng Prog Symp Ser 55:103–110
Cole R (1967) Bubble frequencies and departure volumes at subatmospheric pressures. AICHE J 13(4):779–783. https://doi.org/10.1002/aic.690130434
Cole R, Rohsenow WM (1968) Correlation of bubble departure diameters for boiling of saturated liquids. In: 10th National Heat Transfer Conference, Americal Institute of Chemical Engineers, pp 211–213
Cooke D, Kandlikar SG (2012) Effect of open microchannel geometry on pool boiling enhancement. Int J Heat Mass Transf 55(4):1004–1013. https://doi.org/10.1016/j.ijheatmasstransfer.2011.10.010
Ćoso D, Srinivasan V, M-C L, Chang J-Y, Majumdar A (2012) Enhanced heat transfer in biporous wicks in the thin liquid film evaporation and boiling regimes. J Heat Transf 134(10):101501–101501. https://doi.org/10.1115/1.4006106
Dai X, Yang F, Yang R, Lee Y-C, Li C (2013) Micromembrane-enhanced capillary evaporation. Int J Heat Mass Transf 64:1101–1108. https://doi.org/10.1016/j.ijheatmasstransfer.2013.05.030
de Gennes P-G, Brochard-Wyart F, Quere D (2004) Capillarity and wetting phenomena: drops, bubbles, pearls, waves, 1st edn. Springer-Verlag, New York. https://doi.org/10.1007/978-0-387-21656-0
Ded JS, Lienhard JH (1972) The peak pool boiling heat flux from a sphere. AICHE J 18(2):337–342. https://doi.org/10.1002/aic.690180215
Dhillon NS, Buongiorno J, Varanasi KK (2015) Critical heat flux maxima during boiling crisis on textured surfaces. Nat Commun 6. https://doi.org/10.1038/ncomms9247
Dhir VK, Liaw SP (1989) Framework for a unified model for nucleate and transition pool boiling. J Heat Transf 111(3):739–746. https://doi.org/10.1115/1.3250745
Fritz W (1935) Berechnung des Maximalvolume von Dampfblasen. Z Phys 36:379–388
Fuerstenau DW (2002) Equilibrium and nonequilibrium phenomena associated with the adsorption of ionic surfactants at solid–water interfaces. J Colloid Interface Sci 256(1):79–90. https://doi.org/10.1006/jcis.2001.8139
Gao L, McCarthy TJ (2009) Wetting 101°. Langmuir 25(24):14105–14115. https://doi.org/10.1021/la902206c
Ghiaasiaan SM (2008) Two-phase flow, boiling and condensation in conventional and miniature systems, 1st edn. Cambridge University Press, New York
Griffith P, Wallis JD (1958) The role of surface conditions in nucleate boiling (trans: Cooperation DoI). Massachusetts Institute of Technology, Cambridge
Griffith P, Tien CL, Zuber N (1962) Discussion: “on the size range of active nucleation cavities on a heating surface” (Hsu YY (1962), ASME J. Heat Transfer 84:207–213). J Heat Transf 84(3):213–213. https://doi.org/10.1115/1.3684340
Han C-Y, Griffith P (1965a) The mechanism of heat transfer in nucleate pool boiling—part I. Int J Heat Mass Transf 8(6):887–904. https://doi.org/10.1016/0017-9310(65)90073-6
Han C-Y, Griffith P (1965b) The mechanism of heat transfer in nucleate pool boiling—part II. Int J Heat Mass Transf 8(6):905–914. https://doi.org/10.1016/0017-9310(65)90074-8
Hanks DF, Lu Z, Narayanan S, Bagnall KR, Raj R, **ao R, Enright R, Wang EN (2014) Nanoporous evaporative device for advanced electronics thermal management. In: Thermal and thermomechanical phenomena in electronic systems (ITherm), 2014 I.E. intersociety conference on, 27–30 May 2014. pp 290–295. https://doi.org/10.1109/itherm.2014.6892295
Hanlon MA, Ma HB (2003) Evaporation heat transfer in sintered porous media. J Heat Transf 125(4):644–652. https://doi.org/10.1115/1.1560145
Haramura Y, Katto Y (1983) A new hydrodynamic model of critical heat flux, applicable widely to both pool and forced convection boiling on submerged bodies in saturated liquids. Int J Heat Mass Transf 26(3):389–399. https://doi.org/10.1016/0017-9310(83)90043-1
Hendricks TJ, Krishnan S, Choi C, Chang C-H, Paul B (2010) Enhancement of pool-boiling heat transfer using nanostructured surfaces on aluminum and copper. Int J Heat Mass Transf 53(15–16):3357–3365. https://doi.org/10.1016/j.ijheatmasstransfer.2010.02.025
Heo KY, Kihm KD, Lee JS (2014) Fabrication and experiment of micro-pin-finned microchannels to study surface roughness effects on convective heat transfer. J Micromech Microeng 24(12):125025
Hsu YY (1962) On the size range of active nucleation cavities on a heating surface. J Heat Transf 84(3):207–213. https://doi.org/10.1115/1.3684339
Hsu Y-Y, Graham RW (1961) An analytical and experimental study of the thermal boundary layer and ebullition cycle in nucleate boiling (trans: Center LR). NASA technical note. National Aeronautics and Space Administration, Washington, DC
Hwang GS, Nam Y, Fleming E, Dussinger P, YS J, Kaviany M (2010) Multi-artery heat pipe spreader: experiment. Int J Heat Mass Transf 53(13–14):2662–2669. https://doi.org/10.1016/j.ijheatmasstransfer.2010.02.046
Jaikumar A, Kandlikar SG (2016) Ultra-high pool boiling performance and effect of channel width with selectively coated open microchannels. Int J Heat Mass Transf 95:795–805. https://doi.org/10.1016/j.ijheatmasstransfer.2015.12.061
Jakob M (1949) Heat transfer, vol 1. John Wiley & Sons Inc, New York
Jansen H, de Boer M, Legtenberg R, Elwenspoek M (1995) The black silicon method: a universal method for determining the parameter setting of a fluorine-based reactive ion etcher in deep silicon trench etching with profile control. J Micromech Microeng 5(2):115
Jo H, Ahn HS, Kang S, Kim MH (2011) A study of nucleate boiling heat transfer on hydrophilic, hydrophobic and heterogeneous wetting surfaces. Int J Heat Mass Transf 54(25–26):5643–5652. https://doi.org/10.1016/j.ijheatmasstransfer.2011.06.001
Kandlikar SG (2001) A theoretical model to predict pool boiling CHF incorporating effects of contact angle and orientation. J Heat Transf 123(6):1071–1079. https://doi.org/10.1115/1.1409265
Kandlikar SG (2002) Fundamental issues related to flow boiling in minichannels and microchannels. Exp Thermal Fluid Sci 26(2–4):389–407. https://doi.org/10.1016/s0894-1777(02)00150-4
Kandlikar SG (2012) History, advances, and challenges in liquid flow and flow boiling heat transfer in microchannels: a critical review. J Heat Transf 134(3):034001–034001. https://doi.org/10.1115/1.4005126
Kandlikar SG (2013) Controlling bubble motion over heated surface through evaporation momentum force to enhance pool boiling heat transfer. Appl Phys Lett 102(5):051611. https://doi.org/10.1063/1.4791682
Kandlikar SG (2014) Chapter 5 – Flow boiling in minichannels and microchannels. In: Heat transfer and fluid flow in minichannels and microchannels, 2nd edn. Butterworth-Heinemann, Oxford, pp 221–293. https://doi.org/10.1016/B978-0-08-098346-2.00005-3
Kandlikar SG (2015) Mechanistic considerations for enhancing flow boiling heat transfer in microchannels. J Heat Transf 138(2):021504–021504. https://doi.org/10.1115/1.4031648
Kim S, Kim HD, Kim H, Ahn HS, Jo H, Kim J, Kim MH (2010) Effects of nano-fluid and surfaces with nano structure on the increase of CHF. Exp Thermal Fluid Sci 34(4):487–495. https://doi.org/10.1016/j.expthermflusci.2009.05.006
Koşar A, Kuo C-J, Peles Y (2005a) Boiling heat transfer in rectangular microchannels with reentrant cavities. Int J Heat Mass Transf 48(23–24):4867–4886. https://doi.org/10.1016/j.ijheatmasstransfer.2005.06.003
Koşar A, Kuo C-J, Peles Y (2005b) Suppression of boiling flow oscillations in parallel microchannels by inlet restrictors. J Heat Transf 128(3):251–260. https://doi.org/10.1115/1.2150837
Kousalya AS, Weibel JA, Garimella SV, Fisher TS (2013) Metal functionalization of carbon nanotubes for enhanced sintered powder wicks. Int J Heat Mass Transf 59:372–383. https://doi.org/10.1016/j.ijheatmasstransfer.2012.12.030
Kuo CJ, Peles Y (2008) Flow boiling instabilities in microchannels and means for mitigation by reentrant cavities. J Heat Transf 130(7):072402–072402. https://doi.org/10.1115/1.2908431
Kutateladze SS (1948) On the transition to film boiling under natural convection. Kotloturbostroenie 3:10–12
Li C, Peterson GP (2006) Evaporation/boiling in thin capillary wicks (II)—effects of volumetric porosity and mesh size. J Heat Transf 128(12):1320–1328. https://doi.org/10.1115/1.2349508
Li C, Peterson GP (2007) Parametric study of pool boiling on horizontal highly conductive microporous coated surfaces. J Heat Transf 129(11):1465–1475. https://doi.org/10.1115/1.2759969
Li C, Peterson GP, Wang Y (2006) Evaporation/boiling in thin capillary wicks (l)—wick thickness effects. J Heat Transf 128(12):1312–1319. https://doi.org/10.1115/1.2349507
Li C, Wang Z, Wang P-I, Peles Y, Koratkar N, Peterson GP (2008) Nanostructured copper interfaces for enhanced boiling. Small 4(8):1084–1088. https://doi.org/10.1002/smll.200700991
Li CH, Li T, Hodgins P, Hunter CN, Voevodin AA, Jones JG, Peterson GP (2011) Comparison study of liquid replenishing impacts on critical heat flux and heat transfer coefficient of nucleate pool boiling on multiscale modulated porous structures. Int J Heat Mass Transfer 54(15–16):3146–3155. https://doi.org/10.1016/j.ijheatmasstransfer.2011.03.062
Li D, GS W, Wang W, Wang YD, Liu D, Zhang DC, Chen YF, Peterson GP, Yang R (2012) Enhancing flow boiling heat transfer in microchannels for thermal management with monolithically-integrated silicon nanowires. Nano Lett 12(7):3385–3390. https://doi.org/10.1021/nl300049f
Liaw S-P, Dhir V (1986) Effect of surface wettability on transition boiling heat transfer from a vertical surface. In: Proceedings of the 8th international heat transfer conference, pp 2031–2036
Lienhard JH, Dhir VK (1973) Hydrodynamic prediction of peak pool-boiling heat fluxes from finite bodies. J Heat Transf 95(2):152–158. https://doi.org/10.1115/1.3450013
Lienhard JH IV, Lienhard VJH (2016) A heat transfer textbook, 4th edn. Phlogiston Press, Cambridge, MA
Lienhard JH, Dhir VK, Riherd DM (1973) Peak pool boiling heat-flux measurements on finite horizontal flat plates. J Heat Transf 95(4):477–482. https://doi.org/10.1115/1.3450092
Liter SG, Kaviany M (2001) Pool-boiling CHF enhancement by modulated porous-layer coating: theory and experiment. Int J Heat Mass Transf 44(22):4287–4311. https://doi.org/10.1016/S0017-9310(01)00084-9
Lo C, Zhang JS, Couzis A, Somasundaran P, Lee JW (2010) Adsorption of cationic and anionic surfactants on cyclopentane hydrates. J Phys Chem C 114(31):13385–13389. https://doi.org/10.1021/jp102846d
Lorenz JJ, Mikic BB, Rohsenow WM (1975) A gas diffusion technique for determining pool boiling nucleation sites. J Heat Transf 97(2):317–319. https://doi.org/10.1115/1.3450371
Lu Z, Salamon TR, Narayanan S, Bagnall KR, Hanks DF, Antao DS, Barabadi B, Sircar J, Simon ME, Wang EN (2016) Design and modeling of membrane-based evaporative cooling devices for thermal management of high heat fluxes. IEEE Trans Compon Packag Manuf Technol 6(7):1058–1067. https://doi.org/10.1109/tcpmt.2016.2576998
Mikic BB, Rohsenow WM (1969) A new correlation of pool-boiling data including the effect of heating surface characteristics. J Heat Transf 91(2):245–250. https://doi.org/10.1115/1.3580136
Mills AF (1999) Heat transfer, 2nd edn. Prentice Hall, Upper Saddle River
Mori S, Mt Aznam S, Okuyama K (2015) Enhancement of the critical heat flux in saturated pool boiling of water by nanoparticle-coating and a honeycomb porous plate. Int J Heat Mass Transf 80:1–6. https://doi.org/10.1016/j.ijheatmasstransfer.2014.08.046
Nam Y, Sharratt S, Cha G, Ju YS (2011) Characterization and modeling of the heat transfer performance of nanostructured cu micropost wicks. J Heat Transf 133(10):101502–101502. https://doi.org/10.1115/1.4004168
Palko JW, Zhang C, Wilbur JD, Dusseault TJ, Asheghi M, Goodson KE, Santiago JG (2015) Approaching the limits of two-phase boiling heat transfer: high heat flux and low superheat. Appl Phys Lett 107(25):253903. https://doi.org/10.1063/1.4938202
Patil CM, Kandlikar SG (2014) Pool boiling enhancement through microporous coatings selectively electrodeposited on fin tops of open microchannels. Int J Heat Mass Transf 79:816–828. https://doi.org/10.1016/j.ijheatmasstransfer.2014.08.063
Paul DD, Abdel-Khalik SI (1983) A statistical analysis of saturated nucleate boiling along a heated wire. Int J Heat Mass Transf 26(4):509–519. https://doi.org/10.1016/0017-9310(83)90002-9
Pioro IL, Rohsenow W, Doerffer SS (2004a) Nucleate pool-boiling heat transfer. I: review of parametric effects of boiling surface. Int J Heat Mass Transf 47(23):5033–5044. https://doi.org/10.1016/j.ijheatmasstransfer.2004.06.019
Pioro IL, Rohsenow W, Doerffer SS (2004b) Nucleate pool-boiling heat transfer. II: assessment of prediction methods. Int J Heat Mass Transf 47(23):5045–5057. https://doi.org/10.1016/j.ijheatmasstransfer.2004.06.020
Preston DJ, Miljkovic N, Sack J, Enright R, Queeney J, Wang EN (2014) Effect of hydrocarbon adsorption on the wettability of rare earth oxide ceramics. Appl Phys Lett 105(1):011601. https://doi.org/10.1063/1.4886410
Rahman MM, McCarthy M (2017) Boiling enhancement on nanostructured surfaces with engineered variations in wettability and thermal conductivity. Heat Transf Eng 38(14–15):1285–1295. https://doi.org/10.1080/01457632.2016.1242961.
Rahman MM, Ölçeroğlu E, McCarthy M (2014a) Role of Wickability on the critical heat flux of structured Superhydrophilic surfaces. Langmuir 30(37):11225–11234. https://doi.org/10.1021/la5030923
Rahman MM, Ölçeroğlu E, McCarthy M (2014b) Scalable Nanomanufacturing of virus-templated coatings for enhanced boiling. Adv Mater Interfaces 1(2):n/a–n/a. https://doi.org/10.1002/admi.201300107
Rahman MM, Pollack J, McCarthy M (2015) Increasing boiling heat transfer using low conductivity materials. Sci Rep 5:13145. https://doi.org/10.1038/srep13145. http://www.nature.com/articles/srep13145#supplementary-information
Reay DA, Kew PA, McGlen RJ (2014) Chapter 2 – Heat transfer and fluid flow theory. In: Heat pipes, 6th edn. Butterworth-Heinemann, Oxford, pp 15–64. https://doi.org/10.1016/B978-0-08-098266-3.00002-9
Rohsenow WM (1951) A method of correlating heat transfer data for surface boiling of liquids (trans: Cooperation DoI). Massachusetts Institute of Technology, Cambridge
Rohsenow WM (1952) A method of correlating heat transfer data for surface boiling of liquid. J Heat Transf 74:969–976
Rohsenow WM, Clark JA (1951) A study of the mechanism of boiling heat transfer. J Heat Transf 73:609–620
Rohsenow WM, Griffith P (1955) Correlation of maximum heat transfer data for boiling of saturated liquids (trans: Cooperation DoI). Massachusetts Institute of Technology, Cambridge
Rohsenow WM, Hartnett JP, Cho YI (eds) (1998) Handbook of heat transfer, 3rd edn. McGraw-Hill, New York
Semenic T, Catton I (2009) Experimental study of biporous wicks for high heat flux applications. Int J Heat Mass Transf 52(21–22):5113–5121. https://doi.org/10.1016/j.ijheatmasstransfer.2009.05.005
Sher I, Hetsroni G (2002) An analytical model for nucleate pool boiling with surfactant additives. Int J Multiphase Flow 28(4):699–706
Shin S, Choi G, Kim BS, Cho HH (2014) Flow boiling heat transfer on nanowire-coated surfaces with highly wetting liquid. Energy 76:428–435. https://doi.org/10.1016/j.energy.2014.08.037
Sun K-H, Lienhard JH (1970) The peak pool boiling heat flux on horizontal cylinders. Int J Heat Mass Transf 13(9):1425–1439. https://doi.org/10.1016/0017-9310(70)90178-X
Taylor G (1950) The instability of liquid surfaces when accelerated in a direction perpendicular to their planes. I. Proc R Soc Lond A 201(1065):192–196. https://doi.org/10.1098/rspa.1950.0052
Thome JR (ed) (2015) Encyclopedia of two-phase heat transfer and flow I: fundamentals and methods, 1st edn. World Scientific Publishing Co. Pte. Ltd, Decatur
Wang CH, Dhir VK (1993a) Effect of surface wettability on active nucleation site density during pool boiling of water on a vertical surface. J Heat Transf 115(3):659–669. https://doi.org/10.1115/1.2910737
Wang CH, Dhir VK (1993b) On the gas entrapment and nucleation site density during pool boiling of saturated water. J Heat Transf 115(3):670–679. https://doi.org/10.1115/1.2910738
Wasekar VM, Manglik RM (2002) The influence of additive molecular weight and ionic nature on the pool boiling performance of aqueous surfactant solutions. Int J Heat Mass Transf 45(3):483–493. https://doi.org/10.1016/S0017-9310(01)00174-0
Webb RL (1981) The evolution of enhanced surface geometries for nucleate boiling. Heat Transf Eng 2(3–4):46–69. https://doi.org/10.1080/01457638108962760
Weibel JA, Garimella SV, North MT (2010) Characterization of evaporation and boiling from sintered powder wicks fed by capillary action. Int J Heat Mass Transf 53(19–20):4204–4215. https://doi.org/10.1016/j.ijheatmasstransfer.2010.05.043
Weibel JA, Kim SS, Fisher TS, Garimella SV (2012a) Carbon nanotube coatings for enhanced capillary-fed boiling from porous microstructures. Nanoscale Microscale Thermophys Eng 16(1):1–17. https://doi.org/10.1080/15567265.2011.646000
Weibel JA, Kim SS, Fisher TS, Garimella SV (2012b) Experimental characterization of capillary-fed carbon nanotube vapor chamber wicks. J Heat Transf 135(2):021501–021501. https://doi.org/10.1115/1.4007680
Wenzel RN (1936) Resistance of solid surfaces to wetting by water. Ind Eng Chem 28(8):988–994. https://doi.org/10.1021/ie50320a024
Wenzel RN (1949) Surface roughness and contact angle. J Phys Colloid Chem 53(9):1466–1467. https://doi.org/10.1021/j150474a015
Westwater JW (1959) Boiling heat transfer. Am Sci 47:427–446
Westwater JW, Santangelo JG (1955) Photographic study of boiling. Ind Eng Chem 47(8):1605–1610. https://doi.org/10.1021/ie50548a043
**ao R, Enright R, Wang EN (2010) Prediction and optimization of liquid propagation in micropillar arrays. Langmuir 26(19):15070–15075. https://doi.org/10.1021/la102645u
Yang SR, Kim RH (1988) A mathematical model of the pool boiling nucleation site density in terms of the surface characteristics. Int J Heat Mass Transf 31(6):1127–1135. https://doi.org/10.1016/0017-9310(88)90055-5
Yang F, Dai X, Peles Y, Cheng P, Khan J, Li C (2014a) Flow boiling phenomena in a single annular flow regime in microchannels (I): characterization of flow boiling heat transfer. Int J Heat Mass Transf 68:703–715. https://doi.org/10.1016/j.ijheatmasstransfer.2013.09.058
Yang F, Dai X, Peles Y, Cheng P, Khan J, Li C (2014b) Flow boiling phenomena in a single annular flow regime in microchannels (II): reduced pressure drop and enhanced critical heat flux. Int J Heat Mass Transf 68:716–724. https://doi.org/10.1016/j.ijheatmasstransfer.2013.09.060
Yang F, Li W, Dai X, Li C (2016) Flow boiling heat transfer of HFE-7000 in nanowire-coated microchannels. Appl Therm Eng 93:260–268. https://doi.org/10.1016/j.applthermaleng.2015.09.097
Zhang J, Manglik RM (2005) Additive adsorption and interfacial characteristics of nucleate pool boiling in aqueous surfactant solutions. J Heat Transf 127(7):684–691. https://doi.org/10.1115/1.1924626
Zhang L, Wang EN, Goodson KE, Kenny TW (2005) Phase change phenomena in silicon microchannels. Int J Heat Mass Transf 48(8):1572–1582. https://doi.org/10.1016/j.ijheatmasstransfer.2004.09.048
Zhu Y, Antao DS, Bian DW, Zhang TJ (2015) Wang EN Reducing instability and enhancing critical heat flux using integrated micropillars in two-phase microchannel heat sinks. In: 2015 Transducers – 2015 18th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS), 21–25 June 2015. pp 343–346. https://doi.org/10.1109/transducers.2015.7180931
Zhu Y, Antao DS, Chu K-H, Chen S, Hendricks TJ, Zhang T, Wang EN (2016a) Surface structure enhanced microchannel flow boiling. J Heat Transf 138(9):091501–091501. https://doi.org/10.1115/1.4033497
Zhu Y, Antao DS, Lu Z, Somasundaram S, Zhang T, Wang EN (2016b) Prediction and characterization of dry-out heat flux in micropillar wick structures. Langmuir 32(7):1920–1927. https://doi.org/10.1021/acs.langmuir.5b04502
Zuber N (1959) Hydrodynamic aspects of boiling heat transfer. University of California, Los Angeles
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Section Editor information
Rights and permissions
Copyright information
© 2017 Springer International Publishing AG
About this entry
Cite this entry
Antao, D.S., Zhu, Y., Wang, E.N. (2017). Boiling on Enhanced Surfaces. In: Kulacki, F. (eds) Handbook of Thermal Science and Engineering. Springer, Cham. https://doi.org/10.1007/978-3-319-32003-8_43-1
Download citation
DOI: https://doi.org/10.1007/978-3-319-32003-8_43-1
Received:
Accepted:
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-32003-8
Online ISBN: 978-3-319-32003-8
eBook Packages: Springer Reference EngineeringReference Module Computer Science and Engineering