Search
Search Results
-
Detection of amitraz, a formamidine-based pesticide using chromogenic spray reagent by thin-layer chromatography
In the present study, we developed a simple, sensitive and selective thin-layer chromatographic method for the detection and identification of...
-
Hot–dog structured protective nanocoating for multifunctional cotton fabrics through spray–assisted layer–by–layer assembly
Multifunctional cotton fabrics were prepared by low–cost and environmentally–friendly spray–assisted layer–by–layer assembly to simultaneously...
-
Fabrication of Porous Aluminum Coating by Cored Wire Arc Spray for Anchoring Antifouling Hydrogel Layer
Biofouling has been persisting as a worldwide problem due to the difficulties in finding efficient environment-friendly antifouling coatings for...
-
Investigation of optical, structural, and electrical properties of heterostructure Fe2O3 deposited by RF magnetron sputtering on ZnO layer by spray pyrolysis
In this study, firstly, ZnO thin film was produced on glass substrate by chemical spray pyrolysis method at 450 °C and then Fe 2 O 3 layer was produced...
-
Layer-by-layer assembly of polymers and anisotropic nanomaterials using spray-based approach
Traditional dip-assisted layer-by-layer (LbL) assembly produces robust and conformal coatings, but it is time-consuming. Alternatively,...
-
-
-
Boosting phosphorus–nitrogen–silicon synergism through introducing graphene nanobrick wall structure for fabricating multifunctional cotton fabric by spray assisted layer-by-layer assembly
AbstractEfficient construction of quaternary composite coating on cotton fabric was presented by spraying aqueous solutions of graphene oxide,...
-
Analysis of Distinct Substrate Pre-treatment Effects on Flame-Sprayed Hydroxyapatite Coating
This paper experiments with stainless-steel AISI 316L substrate pre-treatment techniques in preparation for hydroxyapatite (HAp) flame spray coating....
-
Multifunctional antifogging coatings based on ZrO2 and SiO2 nanoparticles by spray-spin-blow layer-by-layer assembly
Multifunctional antifogging (AF) coatings consisting of alternating layers of positively charged ZrO 2 nanoparticles (NPs) and negatively charged SiO 2 ...
-
Deposition of Superhydrophobic Fatty Acid-Coated Al2O3 Films by Spray Pyrolysis Method: Effect of Dispersion Mediums on Morphology and Roughness of the Layer
AbstractIn the present study, the superhydrophobic surface was fabricated by spray pyrolysis method. The precursor for the spray process was the...
-
LPCS Ni-Zn-Al2O3 Intermediate Layer Enhanced SPS NiCr-Cr3C2 Coating with Higher Corrosion and Wear Resistances
The double-layer NiCr-Cr 3 C 2 /Ni-Zn-Al 2 O 3 coatings with sufficient corrosion and wear resistance were prepared on low carbon steel substrates. The...
-
Spray Trajectory Planning for Complex Structural Components in Robotized Cold Spray Additive Manufacturing
In the cold spray additive manufacturing (CSAM) process, layer-by-layer stacking is an efficient method to achieve materials additive manufacturing...
-
Effect of the Outer Layer of Al Coatings Deposited by Cold Gas Spray on the Microstructure, Mechanical Properties and Corrosion Resistance of the AA 7075-T6 Aluminum Alloy
The corrosion of AA 7075-T6 aluminum alloy is a critical issue for many industries. In this study, aluminum coatings were deposited onto AA 7075-T6...
-
Effect of ultrasonication on emulsion formulation, encapsulation efficiency, and oxidative stability of spray dried chia seed oil
Present study was conducted to develop a stable chia oil emulsion using an ultrasound emulsification technique. Whey protein concentrate, gum Arabic,...
-
Automated Trajectory Planning and Analytical Improvement for Automated Repair by Robot-Guided Cold Spray
Cold spraying has emerged as a promising technique for the repair of metallic components. Manipulating the cold spray gun by industrial robots,...
-
Layer structure formation induced by in-situ deposit surface temperature under different scanning methods during thermal spraying
Plasma spraying-physical vapor deposition (PS-PVD) and atmospheric plasma spraying (APS), as new thermal spraying process, could prepare advanced...
-
Synthesis, Characterization and Chemical-Sensor Applications of Zinc Oxide-Graphene Nanocomposite
The proposed study focuses on the development of a gas sensor utilizing a quartz crystal microbalance (QCM) as the sensing platform. The sensor...
-
Residual stress with asymmetric spray quenching for thick aluminum alloy plates
Solution and quenching heat treatments are generally carried out in a roller hearth furnace for large-scale thick aluminum alloy plates. However, the...
-
Strength Degradation Mechanism of CFRP and Aluminium Alloy Hybrid Bonded-Riveted Joints Under Salt Spray Environment
Hybrid bonded-riveted joint has poor corrosion resistance under salt spray environment, especially for dissimilar materials. The study investigates...
