Search
Search Results
-
Investigation of Sn–Bi–In ternary solders with compositions varying from In–Sn eutectic to 59 °C ternary eutectic point
This study reports on the investigation of the melting behavior and mechanical properties of Sn–Bi–In ternary solders, which has two ternary eutectic...
-
Peculiarities of the Eutectic Mg–Li Alloy Thermal Expansion, Heat Capacity and Thermal Conductivity Behavior in the Temperature Range of 80 K to 293 K
Experimental studies of the thermal expansion, heat capacity and thermal conductivity of the eutectic magnesium–lithium alloy (with composition of...
-
-
Use of Eutectic Na–Tl Coolant in a Modular Fast Reactor
AbstractOne of the main problems of fast reactors with sodium coolant is its high chemical activity in interaction with water and air. This requires...
-
Predicting the Density of Solid and Liquid Near-Eutectic Ga–In–Sn Alloy
Europe has set itself the goal of reducing net greenhouse gas emissions to zero by 2050. This requires innovative concepts for the transfer of...
-
Thermophysical properties of magnesium-lithium eutectic
A comprehensive study of the thermophysical properties of an ultralight eutectic Mg-Li alloy (with a lithium content of 23 at. %), promising for use...
-
A Study of Deformation and Fracture of the Eutectic in an Additively Manufactured Al-Si Composite Alloy
AbstractExperimental and numerical studies were conducted on AlSi12 alloy fabricated by wire-feed electron beam additive manufacturing to examine the...
-
Prediction of Greenhouse Gas Solubility in Eutectic Solvents Using COSMO-RS
Over the past few years, eutectic solvents (ESs) have drawn the scientific community's attention because they are usually more environmentally...
-
High-Pressure Density of Eutectic Mixtures Containing dl-Menthol and Acetic Acid
The eutectic mixtures consist of dl -menthol and acetic acid were prepared at five molar ratios (3:1, 2:1, 1:1, 1:2, 1:3). The vibrating-tube...
-
Development of Nickel–Carbon Eutectic Fixed Point Cell for Thermocouple Thermometry
The novel materials of different phase transition temperatures are exploited in thermometry as defined fixed points to form the International...
-
Development, Thermal Properties, and Reliability Testing of Eutectic Polyethylene Glycol as Phase Change Materials for Thermal Energy Storage Applications
The present work outlines the development of eutectic phase change material in different mass fraction ratio and determining its thermal properties....
-
Thermal Properties of NaF–KF and NaF–KF–MgF2 Molten eutectic Mixtures: Experiment and Simulation
Molten fluoride salts are under development for use as fuel coolant and thermal storage in industrial nuclear energy production. This study focuses...
-
Wear Resistance of Eutectic Welding Coatings of Iron-Based Fe–Mn–C–B–Si–Ni–Cr at Increased Temperature
Abstract —This paper investigates the wear of iron-based Fe–Mn–C–B–Si–Ni–Cr hard-faced welding coatings. A tribological test of wear was performed at...
-
Thermal Conductivity and Thermal Diffusivity of Mg–Ca Eutectic Alloys in Solid State
AbstractAn experimental study of the heat transfer coefficients of Mg–Ca eutectic alloys with a calcium content of 10.5 and 73.0 at % is carried out....
-
Thermal Conductivity of Room Temperature Deep Eutectic Solvents
As deep eutectic solvents (DESs) became a prevalent category of materials, reporting their physical and chemical properties turned to be urgent. In...
-
Superior Latent Heat Eutectic Salt Na2CO3-Li2CO3-LiF for Thermal Energy Storage: Preparation and Performance Investigation
In this paper, a novel ternary eutectic salt Na 2 CO 3 -Li 2 CO 3 -LiF was designed and investigated for concentrated solar power (CSP). The FactSage...
-
Identification of the Eutectic Points in the Multicomponent Systems with the High-Throughput CALPHAD Approach
Eutectic materials have long been an area of interest, and the identification of eutectic points is crucial in materials design to utilize their...
-
The Thermal Conductivity of Near-Eutectic Galinstan (Ga68.4In21.5Sn10) Molten Alloy
AbstractThe need for new heat transfer agent for many applications, namely in the consumer electronics industry, requires materials, liquids at room...
-
Experimental investigation on the characteristics of molten lead–bismuth non-eutectic alloy fragmentation in water
To study the interaction between molten non-eutectic alloys and subcooled water during severe nuclear accidents, an experimental investigation was...
-
On the Nature of Eutectic and Eutectoid Transformations
AbstractThe molecular nature of eutectic melt is substantiated, the structure of molecules of this melt is determined, and their size is estimated by...
