Search

Search Results

1. Synthesis of Titanium-Based Laminates by Reaction Sintering in a Two-Temperature Mode

   The (3Ti-Al-2C)/Ti layered composites are synthesized by the method of reaction sintering. A two-temperature sintering mode, 600°C × 3 hrs + 1250°C ×...

   O. K. Lepakova, O. A. Shkoda, S. A. Zelepugin in Russian Physics Journal

   Article 02 December 2023

2. Technological Ways of Reducing the Sintering Temperature of Ceramics Based on Cubic Pyrochlore

   Abstract

   Ceramics of a Bi ₂ O ₃ –ZnO–Nb ₂ O ₅ system (cubic pyrochlore) with homogeneous microstructures, high densities, and high dielectric parameters...

   M. A. Marakhovskiy, M. V. Talanov in Bulletin of the Russian Academy of Sciences: Physics

   Article 23 May 2024
   

3. Effect of Sintering Temperature on the Magnetocaloric Effect of Ni-Mn-In/Tb-Dy-Fe Composites

   In this study, the (Ni ₅₀ Mn _34.75 In _15.25 ) _0.9 /(Tb _0.3 Dy _0.7 Fe _1.92 ) _0.1 composites were prepared by spark plasma sintering method, and the influence of...

   Fang Wang, Yongbin Li, ... Liang Zuo in Journal of Superconductivity and Novel Magnetism

   Article 27 January 2024
   

4. Role of sintering temperature in modulating the charge transport of BiCuSeO thermoelectric system: correlations to the microstructure

   The influence of sintering temperature on the thermoelectric (TE) transport of BiCuSeO is reported in the present work, with an aim to optimize the...

   N. P. Madhukar, K. Gurukrishna, ... Saikat Chattopadhyay in Applied Physics A

   Article Open access 02 January 2024
   

5. The Effect of Sintering Temperature on Crack Growth Resistance Characteristics of Fine-Grained Partially Stabilized Zirconia Determined by Various Test Methods

   Zirconium oxide (zirconia) is widely used as a structural material in various applications. However, upon heating, zirconia undergoes disruptive...

   V. V. Kulyk, Z. A. Duriagina, ... T. L. Tepla in Nanomaterials and Nanocomposites, Nanostructure Surfaces, and Their Applications

   Conference paper 2023
   

6. Study of the Effects of MgO Additive and Sintering Temperature on Mechanical Behavior of Fine-Grained ZrO2–MgO Ceramics

   Zirconia ceramics partially stabilized with various amounts of MgO have been studied. The aim of this work was to investigate changes in mechanical...

   V. V. Kulyk, Z. A. Duriagina, ... V. A. Vynar in Nanostructured Surfaces, Nanocomposites and Nanomaterials, and Their Applications

   Conference paper 2023
   

7. Hot-Pressing Sintering and Analytical Characterization of Coated Particle-Dispersed Fuel Pellets

   Coated particle-dispersed fuel pellets have the characteristics of high thermal conductivity and multilayer protection against fission products,...

   Wentao Liu, Zongyi Shao, ... Zheng Sui in Proceedings of the 23rd Pacific Basin Nuclear Conference, Volume 1

   Conference paper Open access 2023
   

8. Influence of the Sintering Temperature of Y₃Fe_4.97La_0.03O₁₂ Nanoparticles on the Resulting Structural and Magnetic Properties

   This study investigates the influence of sintering temperature on the structural and magnetic properties of Y ₃ Fe _4,97 La _0,03 O ₁₂ , elucidating the...

   F. R. de Souza, E. L. T. França, ... E. Padrón-Hernández in Journal of Superconductivity and Novel Magnetism

   Article 19 April 2024
   

9. Contact rheological DEM model for visco-elastic powders during laser sintering

   Laser sintering is a widely used process for producing complex shapes from particulate materials. However, understanding the complex interaction...

   J. E. Alvarez, A. H. Nijkamp, ... T. Weinhart in Granular Matter

   Article Open access 12 February 2024
   

10. Effect of the Sintering Temperature on Electromagnetic Behaviour of MgB₂ Bulks Using Experimental and Numerical Methods

    A systematic study was reported on the effect of the sintering temperature on the bulk electromagnetic properties, such as levitation force, trapped...

    Burcu Savaşkan in Journal of Superconductivity and Novel Magnetism

    Article 06 July 2022
    

11. Optimization of Sintering Parameters of Lead Oxide Particles for Solid Oxygen Control in Lead Cooled Fast Reactor

    Lead oxide ceramic is a kind of material used for the solid phase oxygen control in lead-cooled fast reactor (LFR) and accelerator driven...

    Xu Tu, Hui** Zhu, ... Tinxu Yan in Proceedings of the 23rd Pacific Basin Nuclear Conference, Volume 3

    Conference paper 2023
    

12. Patterns of the Effect of the Temperature of Spark Plasma Sintering on the Microstructure of Thermoelectric Composites Based on the Matrix of Bi₂Te_2.1Se_0.9Bi₂ with Cobalt Inclusions

    Abstract

    A study is performed of the effect the temperature of spark plasma sintering has on the formation of Co filler particles in the matrix of Bi ₂ Te...

    M. Zhezhu, A. E. Vasil’ev, O. N. Ivanov in Bulletin of the Russian Academy of Sciences: Physics

    Article 01 June 2023
    

13. Effect of sintering temperature on the structural, morphological, optical and electrical properties of Ba_1 − xLa_xFe₁₂O₁₉

    La substituted M-type Barium hexaferrite, Ba _(1−x) La _(x) Fe ₁₂ O ₁₉ , (x = 0.25 and 0.30) were synthesized using ball milling followed by heat treatment at...

    K. R. Nishkala, Rajat Radhakrishna Rao, ... Mamatha D. Daivajna in Applied Physics A

    Article Open access 05 July 2024
    

14. Electrical instruments based thermal conductivity optimization on sintering of nanocomposites of Al and TiB with and without fly ash

    In the pursuit of enhancing thermal characteristics tailored for electrical instrument parts operating in high-temperature environments, a meticulous...

    T. Sathish, A. Parthiban in Interactions

    Article 06 May 2024
    

15. Size-dependent thermal properties and sintering behaviors of silver nanoparticles: insights from molecular dynamics simulation

    Silver nanoparticles are widely utilized in printed electronics for forming conductive lines due to their exceptional electrical conductivity,...

    Longchao Zhuo, Qinghao Wang, ... Zhixin Gao in Applied Physics A

    Article 13 May 2024
    

16. Effect of sintering temperature on structural and optical properties of magnesium aluminate spinel

    Magnesium aluminate spinel (MgAl ₂ O ₄ ) (MAO) was fabricated by sol–gel process and sintered at a temperature ranging from 700 to 1400 °C. The phase...

    Prabhpreet Kaur, Suman Rani in Journal of Optics

    Article 25 March 2023
    

17. Comparative studies of structural and dielectric properties of mullite@zirconia composites synthesized by conventional sintering and thermal plasma sintering

    Mullite@zirconia (Al ₆ Si ₂ O ₁₃ -ZrO ₂ ) ceramic composite was effectively fabricated by two different synthesis methods, namely conventional sintering and...

    Bijaylaxmi Biswal, Samarjit Pattnayak, Dilip Kumar Mishra in Applied Physics A

    Article 03 November 2022
    

18. Synergy effect of mixed sintering accelerator on the deoxidation and sintering property improvement of Cu nanoparticles at low temperature

    In this paper, a mixed sintering accelerator of colophony and cetyltrimethyl ammonium bromide (CTAB) was developed to improve the sintering...

    Yu Zhang, ** Cao, ... Chengqiang Cui in Applied Physics A

    Article 22 September 2021
    

19. Effect of sintering temperature on structural, dielectric and magnetic properties of CoFe_1.5Ni_0.5O₄ prepared by solid-state reaction method

    Samples of CoFe _1.5 Ni _0.5 O ₄ were synthesized using the solid-state reaction method. As depicted from XRD plots, peak intensities increases as the...

    Gulzar Ahmad Lone, Mohd Ikram in Applied Physics A

    Article 29 October 2022
    

20. Effect of sintering temperature of NBT–6BT lead-free ceramics on the structural, ferroelectric and piezoelectric properties

    O. Turki, A. Slimani, ... L. Lebrun in Applied Physics A

    Article 09 February 2022