Search
Search Results
-
Rod/Wire Drawing
This chapter first defines rod/wire drawing operation, taking into consideration the diameter ranges for bar, rod, and wire. The advantages and...
-
GMAW hot-wire process with indirect resistive heating of the auxiliary wire
Due to the coupled filler material and energy supply in gas metal arc welding (GMAW) processes, these processes have limited productivity as a result...
-
Fabrication of Titanium Aluminide Alloys by Twin-Wire Tungsten Inert Gas Welding Applied with High-Frequency Induction Heating Wire Technology: Processing, Microstructure, and Properties
Titanium aluminide (TiAl) alloys are promising high-temperature structural materials in the aerospace field. The wire-arc directed energy deposition...
-
Comparison of the Microstructural Characteristics and the Electrothermal Fracture Mechanism of Au-Pd-Coated Copper Wire and Cu-Ti Micro-alloyed Wire
This study compared the Au-Pd-coated copper (CPA) with the micro-alloyed copper wires (MAC) without a coating layer. Results have shown that heat...
-
Comparative Investigation of Multi-stranded Wire and Single Wire in Submerged Arc Welded Joints of Duplex Stainless Steel: Microstructure and Pitting Properties
In this paper, the effect of ER2209 multi-stranded wire compared to single wire on the microstructure and pitting resistance of 2205 duplex stainless...
-
A Review on Wire Arc Additive Manufacturing of Magnesium Alloys: Wire Preparation, Defects and Properties
Wire arc additive manufacturing (WAAM) is widely used in the rapid prototy** of large parts because of its high deposition rate, high material...
-
Arc Heat Distribution in Cable-Type Welding Wire Submerged Arc Surfacing
AbstractThe cable-type welding wire (CWW) submerged arc surfacing (SAS) is an innovative welding process with the advantages of high efficiency,...
-
Optimization of hot-wire fraction for enhance quality in GMAW
The combination of hot-wire insertion technology and gas metal arc welding (GMAW) is proposed to enhance the deposition rates while reducing energy...
-
Effect of Different Wire Feeding Strategies on the Preparation of Functionally Graded Materials by Dual-Wire Arc Additive Manufacturing
In preparation process of functionally graded materials with a composition transition along the torch-traveling direction by dual-wire arc additive...
-
Pass-Schedule Design for Non-circular Wire Drawing
To establish a designing method of drawing schedule of the wire with an elliptic cross-section, the influence of the cross-sectional shape and the...
-
Analysis of the effect of cryogenic cooling during drawing on AISI-316 steel wire properties
This paper presents new technology for stainless steel wire processing. This technology consists of using cryogenic cooling immediately after the...
-
Wire Based Directed Energy Deposition of JBK-75
Applications and adoption of metal additive manufacturing (AM) are increasing for fabrication of low volume, complex components with novel materials,...
-
Dynamic Tensile and Compressive Behavior Prestressing Steel Wire at the High Strain Rate
Prestressing steel wire is widely used in construction projects, such as prestressed concrete structures, railway sleepers, long-span cable bridges,...
-
The Failure of a Steel Wire Rope: A Root Cause Analysis
The study identifies cyclic stresses as the primary cause of steel wire rope failure, resulting in fatigue failure characterized by a smooth surface...
-
Features of Texture Formation of High-Carbon Steel Wire after Combined Deformation Treatment
AbstractThe results of a study of the features of texture formation and spatial parameters of the surface of high-carbon steel wire after combined...
-
Machining Complex Profile on Nickel-Aluminum-Bronze Alloy through Wire Electric Discharge Machining Process using Zinc-Coated Brass Wire
WEDM is efficient in machining complicated profiles with high dimensional accuracy. The Nickel-aluminum-bronze (NAB) is a high-strength alloy with...
-
Steel Wire Ropes Service Life
This paper demonstrates the low life expectancy of the steel wire rope that might be achieved by using the ISO 4308-Part1:2003 for the calculation of...
-
Wire Drawing Behaviors with Die Angle and Strain Hardening Rate of a Metal
This study investigated the influences of the die angle ( α ) and strain hardening rate of a metal on the microstructure, hardness, strain,...
-
Effect of Die Deflection during Au Wire Bonding Process on Bonding Quality in Overhang Semiconductor Package
Wire bonding is an interconnection technique widely used in semiconductor packaging. Certain packages employ a stacked die configuration for...
-
Visualization and control of the free-flight transfer phenomenon in the wire feed control process
Gas metal arc (GMA) welding requires improved process stability, higher quality and efficiency, and quantitative control of the heat input and...
