Search
Search Results
-
Tribological Behaviour of Austenitic Stainless Steel-Clad Surface Over Low Carbon Steel Produced by Cold Metal Transfer Welding Process
Low carbon steel has become an in-demand material in various industrial applications due to its versatility and cost-effectiveness. Despite its...
-
Vacuum Hot Rolling Preparation of a Stainless Steel Clad Plate and Its Numerical Simulation
Vacuum hot rolling was used to prepare stainless steel clad plate samples. As a key process parameter, force analysis of the compound deformation...
-
Cooperative Deformation Behavior and Microstructure Evolution of High-Strength Titanium-Clad Steel Plate During Thermal Compression
The utilization of Titanium-clad steel plate (TCSP) spans various industries. Over time, there has been an increasing demand for enhanced mechanical...
-
Microstructure and mechanical property assessment of stainless steel–clad plate joint made by hybrid SMAW-GTAW multi-pass welding process
The stainless clad steel plates (SCSPs) are used in several industrial fields such as petroleum and petrochemical industries due to their low cost...
-
Microstructure characterization of the weld cladding of clad steel plate A516 GR.70 - AISI 904L by electroslag strip cladding using Inconel 625 strip
This work investigates the effect of welding on microstructure and microhardness of the clad plate of ASTM A516 steel Grade 70 coated with AISI 904L...
-
Interface Structure Change and Carbon Diffusion of Stainless Steel-Carbon Steel-Laminated Composite under High-Temperature Condition
In this paper, the interface structure and carbon diffusion of stainless steel–carbon steel-laminated composites after heating at different...
-
Microstructure and Salt Spray Corrosion Behaviors of Welded Joints of 304/HRB400 Clad Rebars
The investigation into the impact of carbon dioxide shielded welding on the microstructure and corrosion resistance of clad rebars was conducted. The...
-
Effect of laser process parameters on the dilution, microstructure, and wear behaviour of Tribaloy™ T800 cladding on AISI 316 stainless steel
Tribaloy™ T800, a Co-based alloy, exhibits remarkable tribological properties by virtue of its high-volume fraction of intermetallic Laves phase...
-
Research on Coordinative Deformation Mechanism Between Layers of 304/Q235 Composite Plate under Thermal/Mechanical Coupling
When the dissimilar metal composite plate accumulates inconsistent deformation to a certain degree during the heat treatment process, it indicates...
-
Effect of Surface Oxidation Treatment Before Rolling on Properties of Cold Rolled Al/Steel Composite Plate
Al/Steel composite plate has broad application prospects. In this paper, Al/Steel composite plates with high bonding strength were prepared by cold...
-
Interfacial bonding characteristics and mechanical properties of H68/AZ31B clad plate
Interfacial bonding, microstructures, and mechanical properties of an explosively-welded H68/AZ31B clad plate were systematically studied. According...
-
Improvement in Fretting Wear Properties of AISI 4135 Steel by Laser-Cladded Martensitic Stainless Steel Coatings
To inhibit the fretting wear of the locking mechanism of the variable-gauge high-speed trains, the substrate (AISI 4135 steel) was treated by laser...
-
Investigation on Delamination Characteristics of 2-Ply Clad Metals and Adhesive Joints for Aluminum/Stainless Steel via the Peel Test
AbstractBonding properties are important for metallic multilayer composites (MMCs) comprising different materials or materials with different...
-
Aspects of the Production Technology of Largesized Clad Plates and Large Diameter Pipes Made From Them
This article reveals the relevance of the development of production of clad plates and large-diameter pipes in Russia. The most widespread...
-
Corrosion and Metallurgical Behavior of Wire Arc Additively Manufactured Functionally Graded Superduplex Stainless Steel/Inconel 625
Robotic cold metal transfer process was used for fabrication of wire arc additively manufactured (WAAM) wall involving a bimetallic combination of...
-
Influence of edge-deposited layers on mechanical and corrosion properties of laser beam welds of 15 mm thick AISI 2205 duplex stainless steel
AISI 2205 duplex stainless steel is used in a variety of industries, including the chemical and petrochemical industries. This is due to its high...
-
Barrier Verification and Numerical Simulation of Vacuum Coating on Fe-Co-Ni Interlayer of Stainless Steel Clad Plates
This study aimed to prepare a composite bar by thermal simulation experiment mechanism considering 316L/EH40 composite with Fe-Co-Ni interlayer as...
-
Residual stress and creep strain analysis of Inconel 718 and stainless steel 316 welds
Numerical simulation is implemented to study the generation of residual stress and creep behavior for different kinds of welded joints of 316...
-
Microstructural development and corrosion behavior of 13Cr–4Ni-1Mo martensitic stainless steel clad
Martensitic stainless steels are deposited during manufacturing or repair to prolong the service life of a workpiece in a wide variety of industries...
-
Effect of Interlayers on Microstructure and Properties of 2205/Q235B Duplex Stainless Steel Clad Plate
In this research, 2205/Q235B clad plates were prepared by a vacuum hot rolling composite process. The effects of adding Fe, Ni, and Nb interlayers on...
