Search
Search Results
-
Rolling Contact Fatigue and Thermal Spraying Technique
With the booming development of the remanufacturing industry, the quality control and evaluation of remanufactured products have attracted much...
-
On the Heat-Transfer Effect of Spraying Speed During the Plasma Spraying on Turbine Blade
To investigate the changes in the substrate temperature field during the thermal spraying of turbine blades, this study first uses finite element...
-
Creating Surface Morphologies by Cold Spraying
This chapter presents the method for the microstructuring of component surfaces by the cold spray process with fine particles. Depending on the...
-
Comparative Study on the Microstructure and Properties of 304 Stainless Steel Coatings Prepared by High-Velocity Oxygen Fuel Spraying and Air Plasma Spraying
The 304 stainless steel coatings were applied to a 6061-T6 aluminum alloy substrate using high-velocity oxygen fuel spraying (HVOF) and air plasma...
-
Development of Silicates and Spraying Techniques for Environmental Barrier Coatings
Currently, silicon carbide fibre-reinforced silicon carbide matrix ceramic matrix composites are widely used as high-temperature components for...
-
Formation of Protective Coatings Using an MAK-100 Plasma Spraying Installation
AbstractThe technology of effective protection of the metallic surfaces of machines and mechanisms operating under intense mechanical,...
-
Study of the Propane Detonation Spraying under Different Gun Structures
Detonation spraying is a technique that uses the high-temperature, high-velocity detonation waves to deposit the molten metal particles onto the...
-
Optimization of the Process Parameters of Atmospheric Plasma Spraying Cobalt Ferrite Coatings by Orthogonal Experimental Design
In this research, CoFe 2 O 4 coatings have been successfully deposited using atmospheric plasma spraying technique. Orthogonal experiments were designed...
-
Numerical and Experimental Analysis of a Solid Shroud in Multi-arc Plasma Spraying
Plasma spraying is characterized by high flexibility, but has challenges of high energy consumption and oxidation of the metallic spray particles....
-
Study on Properties of Pure Al Coatings and Al/SiC Composite Coatings by Plasma Transferred Wire Spraying
Normally, aluminum-based (Al-based) anti-corrosion coatings are prepared by flame spraying and other coating technologies to improve the corrosion...
-
Microstructure and Deposition Mechanism of Suspension Plasma Spraying Thermal Barrier Coatings
Nanostructured ceramic coatings are a promising research hotspot in the field of thermal protection coatings. Suspension plasma spraying is a...
-
Corrosion Resistance of Pseudoalloy Copper-Iron Coatings Obtained by Electric Arc Spraying
Operating costs at different enterprises increase because of high wear and corrosion of components. These components can be protected by the electric...
-
Micro Process and Quality Control of Plasma Spraying
This book focuses on the basic physical process and chemical reaction of plasma spraying particle melting, flight and deposition. It introduces the...
-
A parameterized deposition rate model of electrostatic spraying rotating bell atomizer
Compared with spray gun painting, electrostatic spraying rotating bell (ESRB) painting can provide better film-forming quality and higher adhesion...
-
Microstructure and Properties of Chromium Boride–Chromium Carbide–Alumina Composite Coatings Prepared by Reactive Plasma Spraying
A chromium boride–chromium carbide–alumina composite coating was prepared in situ on a Ti-6Al-4V titanium alloy substrate by plasma spraying of Cr 2 O 3 -Al-B...
-
The Effect of Spraying Parameters of the Inner-Diameter High-Velocity Air–Fuel (ID-HVAF) Torch on Characteristics of Ti-6Al-4V In-Flight Particles and Coatings Formed at Short Spraying Distances
High-velocity air–fuel (HVAF) is a combustion process that allows solid-state deposition of metallic particles with minimum oxidation and...
-
External Hybrid Deposition: A Novel Method for Thermal Spraying of Thermally Sensitive Materials
Hybrid plasma spraying has been proved to provide novel coating microstructures as a result of the simultaneous injection of a dry coarse powder and...
-
Influence of HVOF spraying parameters on microstructure and mechanical properties of FeCrMnCoNi high-entropy coatings (HECs)
The study aimed to investigate the impact of high velocity oxy-fuel (HVOF) spraying parameters on the inflight particle temperature, velocity, and...
-
Effect of Low Plasma Spraying Power on Anode Microstructure and Performance for Metal-Supported Solid Oxide Fuel Cells
Metal-supported solid oxide fuel cells have broad application prospects in distributed power generation, transportation, military, and other fields....
-
Optimization of Ni60A Coating Quality by Supersonic Plasma Spraying Based on Response Surface Methodology
The use of advanced thermal spray technology for surface modification of aluminum alloy parts for automobiles can greatly improve the surface...
