Search
Search Results
-
Performance of Plasma Sprayed Coating Rolling Contact Fatigue Behavior and Life Evaluation
This book systematically summarizes the development process of thermal spraying technology, and elaborates on preparation, characterization, and...
-
Plasma-Sprayed Nanodiamond-Reinforced NiCrBSi Composite Coating for Improved Wear and Corrosion Resistance
NiCrBSi-based composites are immensely in demand to replace hard chrome coating for wear, corrosion-resistant applications and necessary to scale up...
-
Effect of laser remelting on microstructure, salt spray corrosion and electrochemical performance of plasma sprayed CoCrFeNiMo HEA coating
A plasma sprayed CoCrFeNiMo high-entropy alloy coating on Ti6Al4V alloy was processed by laser remelting, and the salt spray corrosion and...
-
Preparation and Electrochemical Corrosion Performance of Plasma-Sprayed NiMoCrFeW Coatings
NiMoCrFeW coatings were successfully prepared by atmospheric plasma spraying technology. The effects of spraying process parameters (spraying power...
-
Influence of Reduced Graphene Oxide (rGO) on Plasma Sprayed Nanostructured Coatings
The effect of the addition of reduced graphene oxide (rGO) in atmospheric plasma-sprayed nanostructured Al 2 O 3 -13wt.%TiO 2 and WC-25wt.%Co coatings was...
-
Electrochemical Properties of Plasma-Electrolytically Oxidized Aluminum Coatings Sprayed on MA5 Magnesium Alloy
The aluminum-based coating was sprayed onto a substrate made of MA5 magnesium alloy by detonation and thermal vacuum methods. Potentiodynamic...
-
Effect of Different Post Processing Techniques on Microstructure and Mechanical Properties of Atmospheric Plasma Sprayed WC-17Co Coatings
Atmospheric plasma sprayed coatings demonstrate high fracture toughness and microhardness properties. Thus, they are effective in minimizing...
-
Laser Cutting of Plasma-Sprayed Refractory Aluminum Oxide Products
The possibility of laser cutting plasma-sprayed refractory products made of aluminum oxide is investigated. An industrial laser complex KS-5VDM1-3...
-
Effect of Inter-Splat Bonding Quality on the Dependence of Wear Behavior of Plasma-Sprayed Stainless Steel Coating on Applied Load
304 stainless steel (304SS) powder and novel Mo-cladded 304SS (304SS-Mo) powder were used as feedstocks to prepare metallic coatings with different...
-
Effect of Laser-Textured Edge Splashing on Adhesion and Fracture Mechanism of Plasma-Sprayed Coatings
The material surface was sinusoidally textured using nanosecond laser processing technology, and Ni-based MoS 2 coatings were applied to the resultant...
-
Plasma-Sprayed Alumina Coating Reinforced with Carbon Nanotubes and Graphene Nanoplatelets: Wear Performance in Adverse Environment
The unique mechanical, chemical, and tribological properties of members of graphene family make them a consummate reinforcement candidate for...
-
Effect of Sealing Treatment on the Dielectric Properties of Plasma-Sprayed Al2O3 Coatings
In this paper, alumina (Al 2 O 3 ) coatings were prepared via atmospheric plasma spraying. To improve the insulation performance of the as-sprayed...
-
Thermal Shock Failure Analysis of LaMgAl11O19 Thick Ceramic Coatings Plasma Sprayed with Different Critical Plasma Spraying Parameters
The effect of the critical plasma spraying parameters (CPSPs) on thermal shock resistance of plasma-sprayed LaMgAl 11 O 19 coatings with thickness of...
-
Friction and Wear Behaviors of Perfluoropolyether-Impregnated Plasma-Sprayed Yttria-Stabilized Zirconia Coatings
The plasma-sprayed 8YSZ coating with a texture density of about 25% was prepared by laser processing technology. Perfluoropolyether (PFPE) grease was...
-
Effect of Laser-Glazed Treatment on Thermal Cyclic Behavior of Plasma-Sprayed Lanthanum Zirconate/Yttria-Stabilized Zirconia Double Ceramic Layered on NiCoCrAlYTa-coated Inconel
This paper investigates the thermal barrier coating (TBC) performance of La 2 Zr 2 O 7 /ZrO (2-8 wt.%) Y 2 O 3 coatings (LZ/YSZ TBCs) deposited using...
-
Improvements in the Microstructure and Wear Resistance of Cast-Iron Coating Plasma-Sprayed with Mo-Partially Cladded Cast Iron Powder
Limited inter-splat bonding is a key problem in thermally sprayed coatings. The use of im**ing particles with a high temperature is a crucial...
-
Impact of CNTs Reinforcement on Microstructural Characteristics and Tribological Behavior of Plasma-Sprayed Conventional Ceramic Coatings
The reinforcement of carbon nanotubes (CNTs) in Al 2 O 3 –3wt%TiO 2 and WC-20wt%Co thermally sprayed ceramic coatings is expected to enhance their...
-
Microstructure and Mechanical Properties of the Plasma-Sprayed and Cold-Sprayed Al0.5CoCrFeNi2Ti0.5 High-Entropy Alloy Coatings
In this study, Al 0.5 CoCrFeNi 2 Ti 0.5 high-entropy alloy (HEA) powders were prepared by the gas atomization method. The sieved powders with particle...
-
Corrosion Resistance of Plasma-Sprayed Ceramic Coatings Doped with Glass in Different Proportions
To improve the corrosion resistance of Al 2 O 3 -13 wt.% TiO 2 (AT13) coatings prepared by plasma spraying, CaO-MgO-Al 2 O 3 -SiO 2 silicate glass powder was...
-
Splat Shape and Pore Size Distribution in Plasma Sprayed Alumina Coating at Various In-flight Particle Conditions
The segregated effects of particle temperature and velocity on the morphology of plasma sprayed alumina splats and pore size distribution in the...