Search
Search Results
-
Effect of Interfacial Bonding Characteristics on Impact Strength of Jute Fiber Reinforced Composites
Natural fiber-based composite materials have emerged applications in automotive, aerospace, and marine applications. For better mobility, light and...
-
Effect of Hot-Pressing Rate on Interface and Bonding Strength of Mg/Al Composite Sheets with Zn Interlayer
In this work, the AZ31/1060 laminated metal composites with Zn interlayer were successfully prepared by hot pressing with a strain of 47% in the...
-
Interfacial Bonding Strength and Wear Resistance of TaC-Reinforced Layer Prepared on Bearing Steel Surface by Hot Pressing
To solve the problems of surface wear and fracture of bearing rings, tantalum carbide (TaC)-reinforced layer was prepared on the surface of GCr15...
-
Cu/Al Dissimilar Cold Spot Forge Welding: Effects of Bonding Temperature and Reduction Ratio on Joint Strength and Reaction Layer Growth
High-strength, high-throughput, direct metallurgical joining of copper/aluminum (Cu/Al) is in high demand for electrodes and other electronic...
-
Fabrication of AZ31/Mg3Y Composites with Excellent Strength and Plasticity via Accumulated Rolling Bonding and Diffusion Annealing
AZ31/Mg3Y composites with a layer thickness of 100–200 μm were fabricated by accumulated rolling bonding (ARB), which was followed by diffusion...
-
Effects of pin size and of using an interlayer on interface bonding and fatigue strength of AA2024 to Ti6Al4V lap joints made using friction stir welding
A strong effort has continued to optimize friction stir lap welding (FSLW) process and to achieve high strength of dissimilar metal welds. For more...
-
Ionic Bonding
Here we introduce the concept of ionic bonding, including electronegativity, the Madelung constant, lattice energy, the Born Haber cycle, and...
-
The Effect of Yttria Stabilized Zirconia on Bonding Strength and Corrosion Resistance of Bioactive Glass Coatings Prepared by Electrophoretic Deposition (EPD) Method
AbstractHigher mechanical properties were achieved after adding YSZ-stabilized zirconia to bioactive glass. In this research, Nano YSZ/stabilized...
-
Interfacial Bonding Characteristics in Natural Fiber Reinforced Polymer Composites Fiber-matrix Interface In Biocomposites
This book provides a general overview of the importance of fibre-matrix interfacial bonding characteristics in natural fibre-based composites to...
-
Covalent, Metallic, and Secondary Bonding
This chapter introduces the concepts of bonding, coordination, and packing fraction. We start with covalent bonding, encompassing both valence bond...
-
Dissimilar transient liquid phase bonding of Ti-6Al-4V alloy to Inconel 625 superalloy: effect of bonding temperature on microstructural evolutions and mechanical properties
The present study investigated the effect of bonding temperature on the dissimilar transient liquid phase (TLP)–bonded IN-625/Ti-6Al-4V dissimilar...
-
Effects of Transient Liquid Phase Bonding Time on Microstructure, Mechanical and Corrosion Properties During Bonding of Inconel 617/AISI 310 Stainless Steel
In this study, effects of bonding time on microstructure, mechanical properties and corrosion resistance of transient liquid phase bonded Inconel 617...
-
Introduction to Interfacial Bonding Characteristics of Natural Fiber-Reinforced Composites
Interfacial bonding of natural fiber reinforced composites is important to be in contact with reinforcement and matrix at the time of processing of a...
-
Tensile Strength and Fracture Morphology of Fe/Al Solid-State Bonding Interface Obtained by Forge Welding: Effect of Oxide Scale and Estimation of the Bond Strength of Each Phase
Recently proposed high-strength iron (Fe)/aluminum (Al) spot-forged joints, in which the thickness of the reaction layer is virtually intermetallic...
-
Riv-Bonding of Aluminum Alloys with High-Strength Steels against the Favorable Joining Direction
In order to exploit the advantages offered by multi-material design, this work studies the feasibility of joining aluminum alloys with high-strength...
-
Study of the Influence of the Chemical Composition of Aluminium Solders on the Bonding Strength of Brazed Titanium Structures
AbstractStudies of the processes of wetting and spreading of silicon-doped aluminium on titanium under the conditions of formation of soldered joints...
-
Achieve High Interfacial Bonding Strength of Ti/Al Laminated Composite at Room Temperature via Electropulsing-Assisted Ultrasonic Additive Manufacturing
In this paper, electropulsing (EP) was employed to assist ultrasonic additive manufacturing (UAM) of Ti/Al laminated metal composites (LMCs). By...
-
Diffusion Bonding Process and Interface Performance of 2198 Al-Li Alloy
The diffusion bonding process can take full advantage of 2198 Al-Li alloy to produce high-efficiency integral structures. However, the dense and...
-
Effect of Die Deflection during Au Wire Bonding Process on Bonding Quality in Overhang Semiconductor Package
Wire bonding is an interconnection technique widely used in semiconductor packaging. Certain packages employ a stacked die configuration for...
-
Laser Surface Modification on Titanium Bipolar Plate of Hydrogen Fuel Cell to Enhance Bonding Performance
Adhesive bonding plays an increasingly important role in joining metallic bipolar plates of hydrogen fuel cell due to high manufacturing efficiency...