Search
Search Results
-
Investigation of the Annealing Effects on Mechanical Properties and Interfacial Characteristic of TA1/Al5083 Bimetal Composite
The influence of annealing treatment on the mechanical properties and interfacial characteristics of a TA1/Al5083 bimetal composite was investigated...
-
The Effects of Annealing on Microstructure and Mechanical Properties of Monolithic Low Carbon Steel and Medium Manganese Steel/low Carbon Steel (Mn8/SS400) Bimetal Composite
Metal composites have attracted many interests due to their multi-functionality and excellent overall performance. Medium Mn steels have received...
-
Microstructure and Mechanical Behavior of Mg-Based Bimetal Plates with High Formability Sleeve by Co-extrusion
In this study, microstructure and mechanical behavior of two types of Mg-based bimetal plates with a high formability sleeve were systematically...
-
Enhanced Interfacial Joining Strength of Mg/Ti Bimetal Casting via 3D-Printed Ti-Based Lattice Material
This study innovatively joins magnesium and titanium alloys by incorporating a 3D-printed lattice structure into a magnesium alloy melt via compound...
-
Structure and Phase Composition of Heat Treated Al – Zr Bimetal
Special features of structural and phase transformations occurring in annealing of an explosion-welded Al – Zr bimetal are considered. It is shown...
-
MOF-derived Ni-Co bimetal/porous carbon composites as electromagnetic wave absorber
In this paper, Ni-Co/PC composite is prepared by introducing metal Co element with Ni-MOF/PC as precursor. Then a series of Ni-Co bimetal/PC...
-
Microstructure and Mechanical Properties of Hadfield Steel Matrix Composite Reinforced with Dispersed High Chromium Cast Iron
In this paper, the Hadfield steel matrix composite reinforced with dispersed high chromium cast iron (HCCI) was prepared by using the hot-rolling...
-
Influences of Coating Type on Microstructure and Strength of Aluminum–Steel Bimetal Composite Interface
The present study is aimed to investigate the effects of zinc electroplated coating and hot dip** at 480 °C on the microstructure and mechanical...
-
Research Progress of Composite Preparation Technology of Bimetallic Wire
The bimetallic composite wireBimetal composite wire is concentrically covered with another metal layer on the outer surface of the metal core wire,...
-
Synergistic Incorporation of 2D Graphitic Carbon Nitride into Bimetal Oxide Photoanodes Towards Higher-Performance DSSCs
This study aims to develop cost-effective and efficient dye-sensitized solar cells (DSSCs) by synthesizing a novel NiMoO 4 /g-C 3 N 4 hybrid composite...
-
Use of CoNi-ZIF (zeolitic imidazolate framework)-derived bimetal-doped nitrogen-rich porous carbon composite transition metal oxides in lithium–sulfur batteries
Lithium–sulfur batteries have drawn widespread attention due to their excellent energy density and theoretical specific capacity. However, the low...
-
Determination of Mechanical Properties and Fracture Behavior of Hot-Rolled Inconel 617/Ni Bimetal Composite Plate
Molten salt reactors (MSRs), which represent a widely implemented reactor type, are subject to severe conditions, which significantly impact...
-
Dopamine-modified nanospheres of oxalic-bimetal for T1/T2 dual-modal MRI and photothermal tumour treatment
Integrated platforms combining imaging diagnosis and therapy have attracted considerable attention. In this work, a novel...
-
Mechanical Properties of Aluminium/Stainless Steel Bimetal Composite Fabricated by Extrusion Process
In this work, an indirect extrusionIndirect extrusion process was designed to manufacture a stainless steelStainless steel reinforced aluminium...
-
In-situ grown NiCo bimetal anchored on porous straw-derived biochar composites with boosted microwave absorption properties
With the gradually increasing protection awareness about electromagnetic pollution, the demand for absorbing materials with renewability and...
-
Bonding of compound casted Ti/Al bimetal by heat treatment
The formation mechanism of the bonding between compound cast Al/Ti bimetal during a heat treatment regime was investigated. Commercially pure Al was...
-
Investigation of Cu Interlayer on Joint Formation of Ti/Mg Bimetal Fabricated by Liquid–Solid Compound Casting Process
In this paper, TC4/AZ91D bimetallic composites has been prepared by liquid–solid compound casting process adapting various thickness of Cu coating....
-
Effect of Mold Casting Parameters in Interface Properties of Iron/Copper Bimetallic Composites Based upon an Ancient Quranic Metal Matrix Composite (QMMC)
The relation between iron/copper bimetallic composites has many challenges; one of the most important characteristics is their diffusion and its...
-
Study on Microstructure and Properties of Welded Joint of L360QS/N08825 Bimetallic Composite Pipe
In this study, the three-phase zone of welded joints in L360QS/N08825 bimetallic composite pipes was analyzed using experimental methods such as room...
-
Welding L415/316L Bimetal Composite Pipe Using Post-Internal-Welding Process
The butt welding of bimetal composite pipes generally adopts single-side welding, which easily gives rise to the problems such as high cost or crack...
