Search

Search Results

1. Microstructural Characterization and Grain Refinement of Ti-15 V-3Al-3Cr-3Sn Gas Tungsten Arc Welds by Ni- and Si-Modified Fillers

   In the present study, the influence of nickel (Ni) and silicon (Si) additions to the Ti-15 V-3Al-3Cr-3Sn (Ti-15-3) fillers on microstructure and...

   K. Vamsi Krishna, C. Gopi Krishna, ... N. Kishore Babu in Journal of Materials Engineering and Performance

   Article 22 January 2024
   

2. Effect of Asynchronous Rolling Process on Microstructures and Properties of V-Ti-Ni Alloys for Hydrogen Separation

   The experiments of asynchronous rolling were carried out to investigate the effect of different roll speed ratios on microstructures and mechanical...

   Yinsheng **e, Dawen Liu, ... Peng Jiang in Journal of Materials Engineering and Performance

   Article 04 November 2022
   

3. Strain Partitioning in a Multi-phase V–Ti–Ni Alloy Containing Superelastic Nano-precipitates

   In V ₄₅ Ti ₃₀ Ni ₂₅ (at. pct), superelastic TiNi and a stable V-rich bcc phase ( β ) coexist in multiple-phase mixtures with each acting as matrix and...

   Jaclyn L. Cho, C. Cem Tasan in Metallurgical and Materials Transactions A

   Article Open access 06 December 2022
   

4. Microstructure and hydrogen storage properties of Ti–V–Mn alloy with Zr, Ni, and Zr₇Ni₁₀ addition

   Alloying is applied to improve the activation and hydrogen desorption properties of Ti–V–Mn alloys in this study. The effects of Zr, Ni, and Zr ₇ Ni ₁₀ ...

   Zhenyu Feng, Hong Zhong, ... Shuangming Li in Journal of Materials Research

   Article 03 May 2022
   

5. Improved Hydrogen Storage Properties of Ti₂₃V₄₀Mn₃₇ Alloy Doped with Zr₇Ni₁₀ by Rapid Solidification

   As-cast and rapidly solidified Ti ₂₃ V ₄₀ Mn ₃₇ alloy doped with Zr ₇ Ni ₁₀ was synthesized by arc melting and melt-spinning. The microstructure, activation...

   Zhenyu Feng, Hong Zhong, ... Shuangming Li in Acta Metallurgica Sinica (English Letters)

   Article 19 January 2023
   

6. Solid-State Hydrogen Storage Properties of Ti–V–Nb–Cr High-Entropy Alloys and the Associated Effects of Transitional Metals (M = Mn, Fe, Ni)

   Recently, high-entropy alloys (HEAs) designed by the concepts of unique entropy-stabilized mechanisms, started to attract widespread interests for...

   Bo Cheng, Yunkai Li, ... Yunfei Xue in Acta Metallurgica Sinica (English Letters)

   Article Open access 13 April 2022
   

7. Investigation of the Physical Properties of XCRh₃ (X = Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Zr, Nb, Mo, Tc, Ru, Pd, Ag) Inverse Perovskites from First Principles

   Inverse perovskites are the counterparts to the largest family of crystalline perovskite materials and have attracted significant research interest...

   Muhammad Nasir Rasul, Memoona Mehmood, ... Alina Manzoor in Journal of Electronic Materials

   Article 09 August 2022
   

8. Pseudobinary Eutectic Growth and Structural Evolution Control of Quinary Ti₂₇Ni₂₅Co₂₀Nb₁₄V₁₄ High-Entropy Alloy Through Containerless Processing

   The rapid eutectic growth kinetics of undercooled liquid Ti ₂₇ Ni ₂₅ Co ₂₀ V ₁₄ Nb ₁₄ high-entropy alloy (HEA) was investigated by electromagnetic levitation...

   **annian Zhu, Jian Chang, ... Bingbo Wei in Metallurgical and Materials Transactions A

   Article 06 October 2023
   

9. Mechanical and Oxidation Characteristics of Ti₂₀-Al₁₆-V₁₆-Fe₁₆- Ni₁₆-Cr₁₆ High-Entropy Alloy Developed via Spark Plasma Sintering for High-Temperature/Strength Applications

   Ti6Al4V is one of the most useful alloys because of its high strength, low weight, high oxidation resistance and low CTE. However, it is weak in...

   C. O. Ujah, A. P. I. Popoola, ... U. O. Uyor in Journal of Materials Engineering and Performance

   Article 20 June 2022
   

10. Hydrogen sorption properties of Ti_15.4Zr_30.2Mn(_54.4−x−y)V_xCr_yNi_y alloy able of being activated at room temperature and pressure of 0.23 MPa

    Proposed Ti _15.4 Zr _30.2 Mn _{(54.4− x − y )} V _x Ni _y Cr _y alloy compositions are characterized by improved characteristics, in particular hydrogen saturation at room...

    H. Yu. Mykhailova, V. A. Dekhtyarenko, Ya. V. Vasylyk in MRS Communications

    Article 30 August 2023
    

11. Investigating the Tribology, Vickers Hardness and Microstructure of Ti₂₀–Al₂₀–V₂₀–Fe₂₀–Ni₂₀ HEA Developed with SPS

    High-entropy alloy (HEA) has gained considerable interest in the research community because of its essential properties over conventional alloys....

    C. O. Ujah, A. P. I. Popoola, ... U. O. Uyor in Transactions of the Indian Institute of Metals

    Article 25 July 2022
    

12. Effects of Ti and High Cooling Rate on the Phase Equilibria and Properties of Ni₃(Al,V) Alloys

    Investigations of the Ni ₃ (Al,V,Ti) alloys with 5 at.% Ti addition show that high quenching rates from the liquid state allow for the preservation of...

    Tomasz Czeppe, Anna Wierzbicka-Miernik, ... Witold Przybyło in Journal of Materials Engineering and Performance

    Article 02 January 2020
    

13. Microstructure and Wear Resistance of In Situ Synthesized (Ti,V)C Reinforced Nickel Matrix Composite Coatings

    In situ synthesized (Ti, V)C reinforced Ni-based composite coatings were prepared using laser cladding method. The phase composition, microstructure,...

    Ze Sun, Hanguang Fu, ... **aojun Yang in Journal of Materials Engineering and Performance

    Article 10 July 2024
    

14. Structural, Electrochemical and Hydrogen Sorption Studies of Nanocrystalline Ti-V-Co and Ti-V-Ni-Co Alloys Synthesized by Mechanical Alloying Method

    In this paper, Ti-V-Co and Ti-V-Ni-Co alloys are considered as the hydrogen storage systems and the negative electrodes in Ni-MH _x secondary...

    M. Balcerzak in Journal of Materials Engineering and Performance

    Article Open access 12 August 2019
    

15. Microstructures and mechanical properties of TiAl joint brazed with Ti-Mn-Fe-Ni-Zr system medium-entropy filler alloy

    A five-element medium-entropy filler alloy with composition of Ti-(18 ~ 24)Mn-(12 ~ 18)Fe-(3 ~ 8)Ni-(3 ~ 8)Zr (wt.%) was proposed for vacuum brazing...

    Zhiliang Zhai, **nyu Ren, ... Yongjuan **g in Welding in the World

    Article 25 May 2024
    

16. Hydrogen Kinetics in Membrane Alloys Based on Fe–Ni, Nb–Ni, and V–Ni

    Abstract

    The kinetic characteristics, namely, diffusion D and permeability Φ, of hydrogen in membrane alloys based on binary alloys Fe–Ni, Nb–Ni, and...

    N. I. Sidorov, S. Kh. Estemirova, ... V. A. Polukhin in Russian Metallurgy (Metally)

    Article 01 August 2022
    

17. Effect of High-Energy Ball Milling in Toluene on the Morphology, Phase Evolution, and Contamination for Some Elemental Powders

    This study reports the effect of milling time on the carbon content, morphology, crystallite size, and phase evolution of pure elemental Al, Fe, Ni,...

    Kishore Kumar Behera, K. G. Pradeep, Srinivasa Rao Bakshi in Metallurgical and Materials Transactions A

    Article 16 November 2023
    

18. Microstructure Evolution of Vacuum-Brazed Ti/Mo Joints with Ti- and Zr-Based Filler Metals

    Joining dissimilar materials, such as Ti and Mo, faces several difficulties due to the differences in their material properties. Dissimilar materials...

    A. A. Ivannikov, N. S. Popov, ... E. A. Chuvaeva in Journal of Materials Engineering and Performance

    Article 05 October 2023
    

19. Fabrication of Ti/TiO₂/SnO₂-Sb-Ir/SnO₂-Sb-Ni Using Three Kinds of TiO₂ Interlayer and an Optimized TiO₂-Nanotube Interlayer-Based Anode for Electrochemical Treatment of Wastewater

    Ti/TiO ₂ / SnO ₂ -Sb-Ir/SnO ₂ -Sb-Ni electrodes modified with three kinds of TiO ₂ interlayer materials were fabricated. TiO ₂ macroporous membrane (MAc)...

    Mengyao Shao, Bin Hu, ... **ngfu Zhou in Journal of Electronic Materials

    Article 05 December 2022
    

20. Characteristics of Amorphous, Nanocrystalline, and Crystalline Membrane Alloys

    Abstract

    The alloys intended for membrane technologies for producing high-purity hydrogen and the methods of their synthesis are analyzed. Both...

    V. A. Polukhin, N. I. Sidorov, ... R. M. Belyakova in Russian Metallurgy (Metally)

    Article 01 August 2022