Search
Search Results
-
Open Hole Tensile Test for Measuring Residual Tensile Strength and Delamination of Glass Fibre Metal Mesh Polymer Composites
Glass Fibre Metal Mesh Polymer Composites (GFMMPC) are one of the alternative for engineering materials because their elevated mechanical properties....
-
Effect of Curing Age on Tensile Properties of Fly Ash Based Engineered Geopolymer Composites (FA-EGC) by Uniaxial Tensile Test and Ultrasonic Pulse Velocity Method
Tensile properties of fly ash based engineered geopolymer composites (FA-EGC) at different curing ages were studied by uniaxial tensile test and...
-
Fabrication and Tensile Impact and Hardness Test of Al6061/SiC/Coconut Shell Ash Composites
A research study was made to examine the mechanical properties of metal matrix composite which consisting of Al alloy reinforced with Coconut Shell...
-
Microstructural characterization and tensile strength of TiC/Ni-20Cr composite through the small punch test technique
The tensile strength and fracture mode of the TiC/Ni-20Cr composite were determined through the small punch technique (SPT). The composite was...
-
A Critical Analysis of the Tensile Adhesion Test for Thermally Sprayed Coatings
Tensile adhesion tests (TATs) are an economical and convenient tool to assess the bond strength of thermal spray coatings and provide insight into...
-
Quasi-brittle Deformation and Fracture Behaviors of NM450TP High-Strength Wear-Resistant Steel Plates during Twice Tensile Test
As the strength grade increases, the cold formability of high-strength steels (HSS) inevitably decreases and the brittleness tendency is obvious....
-
Interrupted tensile tests to reveal the non-uniform tensile deformation of AZ31 magnesium alloy welding joint processed by friction stir welding
Interrupted tensile tests were conducted on FSWed AZ31 Mg alloy to reveal the non-uniform tensile deformation and underlying deformation mechanisms...
-
Effect of Ag3Sn on Fracture Behaviors of Sn-3.5Ag Lead-Free Solder during In Situ Tensile Test at Low Temperature
In situ tensile tests on Sn-3.5Ag lead-free solder were performed with different rates of 10 μ m/s and 300 μ m/s at − 198 °C liquid nitrogen...
-
On The Role of Constitutive Modeling and Computational Parameters in the Numerical Simulation of Dynamic Tensile Extrusion Test
In Dynamic Tensile Extrusion (DTE) test, the material is subjected to extreme conditions, such as severe plastic deformations, high pressures, and...
-
In situ tensile test of selective laser melted Ti-6.5Al-2Zr-1Mo-1V alloy at different stages of martensite decomposition
The morphology and microstructures of Ti-6.5Al-2Zr-1Mo-1V (TA15) samples at different stages of martensite decomposition fabricated by selective...
-
Formability in Warm Deep Drawing of CFRTP Using Tensile Test with Crossing Angle of Carbon Fiber as a Variable
For warm drawing of twilled CFRTP(Carbon Fiber Reinforced Thermo Plastic), it is necessary to better predict wrinkling during deformation or bending...
-
Tensile Testing
This chapter describes the experimental investigation while performing non-standardized 10° off-axis tensile tests on unidirectionally reinforced...
-
Tensile, Thermal Properties, and Biodegradability Test of Paddy Straw Powder-Filled Polyhydroxybutyrate-3-Valerate (PHBV) Biocomposites: Acrylation Pretreatment
The mechanical, thermal, and biodegradability properties of paddy straw powder (PSP)-filled polyhydroxybutyrate-3-valerate (PHBV) biocomposites were...
-
Calibrating a New Compressive-to-Tensile Load-Transferring Device for Determining the Direct Tensile Strength of Granite
The direct tensile strength of hard rocks such as granite was measured using hollow disk-type specimens in the form of rock rings. These specimens...
-
Uniaxial Tensile Performance in the Presence of a Defect: Prediction Through a Defect-Tolerant Design Framework
The inherent imperfections introduced during the manufacturing processes of casting, welding, and additive manufacturing often result in compromised...
-
Tensile Properties and Potential Applications of Leucaena-Silicone Biocomposite
The Leucaena plant possesses numerous medicinal properties and functionalities that make it highly valuable in the field of medicine. In order to...
-
High-Temperature Behavior of Superalloy XH 62 in Compressive and Tensile Modes
Superalloy XH 62(Ni-Cr-Mo-Fe-Al) is studied for its high-temperature behavior under compressive and tensile mode of deformation at elevated...
-
Effect of Pyramidal Plane II Twinning in Tensile Deformation on Tensile–Compression Yield Asymmetry in Three Orthogonal Directions of Mg Alloy
Several studies have focused on the tensile–compression yield asymmetry of Mg alloy in only one direction. This study investigated the yield...
-
Influence of Loading Direction on the Mechanical Parameters of Pre-formed Materials in Tensile Test
In the recent years, the determination of non-proportional loadingNon-proportional loading paths has been the focus of many publications. Different...
-
A Study on Tensile Strength Attributes of Jute Fiber-Reinforced Polyester Composite
Natural fiber have shown great advantages over synthetic fibers due to the ease of its availability. The alkali treatment for these fibers enhances...