Search
Search Results
-
Analysis of post-condensation and thermo-oxidative degradation in cycloaliphatic polyamide through time-resolved rheology (TRR)
Melt post-condensation and thermal and thermo-oxidative degradation of a cycloaliphatic polyamide (Trogamid™ CX7323) were studied through...
-
Characteristics of transparent cured film patterns prepared from sol-gel-derived positive-type photosensitive oligomeric silsesquioxanes with random structure
In the previous study, prebaked films are prepared from positive-type photosensitive oligomeric silsesquioxanes with phenyl (>50 mol%) and methyl...
-
HCl post-treatment and pervaporation performance of boron-doped organic silicon membrane for the dehydration of ethyl acetate/water mixture
Boron-doped silica membrane (B-SiO 2 membrane) was prepared using the sol-gel method, with 1, 2-bis(triethoxysiliconyl) ethane (BTESE) and boric acid...
-
Control of maleic acid-propylene diepoxide hydrogel for 3D printing application for flexible tissue engineering scaffold with high resolution by end cap** and graft polymerization
BackgroundControl of 3D printing of highly tough hydrogel inks with adequate printability, scaffold fidelity and mechanical properties are highly...
-
In Situ Fabrication of Superfine Perovskite Composite Nanofibers with Ultrahigh Stability by One-Step Electrospinning Toward White Light-Emitting Diode
All-inorganic CsPbX 3 (X = Cl, Br, I) perovskite nanocrystals (NCs) are emerging as promising candidate materials for optoelectronic devices due to...
-
Ecofriendly Composite/Nanocomposite from Discarded Addition and Condensation Polymers
It is common knowledge the extraction of raw material from the environment has occurred without control. Besides, the inappropriate disposal of...
-
Factors controlling the performance of film patterns of cured sol-gel-derived positive-type photosensitive oligomeric silsesquioxanes with random structure
We investigated the effect of heating rates during post-baking on the minimum resolution widths of film patterns prepared from positive-type...
-
Morphological and structural control of dendritic mesoporous silica&titania nanospheres by the one-pot co-condensation approach
Dendritic mesoporous silica nanospheres (DMSNs) possess excellent specific surface areas, pore volumes, and extremely accessible internal spaces....
-
Synthesis of Metal Oxide Aerogels via Epoxide-Assisted Gelation of Metal Salts
Over the past two decades, the diversity of metal and metalloid oxide materials prepared using sol–gel techniques has increased significantly. This...
-
Hydrothermal treatment of alumina powders to alter the low-temperature binding of chemically bonded phosphate ceramic composites via infrared irradiation
This paper explores the hydrothermal treatment of α-Al 2 O 3 powders to improve the binding in ceramic parts produced via a chemical bonding of ceramic...
-
Quantum Dots Based Nanocomposites
This chapter explores the topic of quantum dots-based nanocomposites, providing a synopsis of their fabrication, characterisation, and varied...
-
Superhydrophobic and Flexible Aerogels and Xerogels Derived from Organosilane Precursors
The field of organosilane-derived aerogels is a rather young area of aerogel research. Inherently, organosilane precursors offer the advantage that...
-
One-pot, degradable, silica nanocarriers with encapsulated oligonucleotides for mitochondrial specific targeting
Mutations in nuclear and mitochondrial genes are responsible for severe chronic disorders such as mitochondrial myopathies. Gene therapy using...
-
Survey of Wood-Based Materials
This chapter introduces the structure and classification of internationally used wood-based materials for a necessary differentiation and gives an...
-
Icephobic characteristics of organically functionalized silica surfaces
The current study aims to develop a non-fluorinated, silica surface to enhance anti-icing behavior. For this purpose, two strategies namely...
-
Interfacial Assemblies for Film Devices
The interfacial assemblies are developed for the preparation of different mesoporous membrane devices. In the following context, diverse assembly...
-
Radiation Curing of Fiber Reinforced Polymer Composite Based Mechanical Joints
In today’s scenario, fiber reinforced polymer (FRP) composites provide wide range of applications in various fields of industrialization. These FRP...
-
Synthesis Protocol
CBNMS, one of the most versatile compounds, occupying the different allotropes of pure or mixed hybridization orbitals sp1,sp2 and sp3. A more...
-
Characterizing Bio-carbon for Metallurgical Processes Using Micro X-ray Computed Tomography with High Temperature Experiments
An important path to the goal of reducing the metal producing industries’ CO2 footprint is to replace fossil carbonCarbon sources with bio-based...
-
Ecofriendly Composite/Nanocomposite from Discarded Addition and Condensation Polymers
It is common knowledge the extraction of raw material from the environment has occurred without control. Besides, the inappropriate disposal of...