Search
Search Results
-
Misorientation Development at Σ3 Boundaries in Pure Copper: Experiments and MD Simulations
During deformation of bulk polycrystalline materials, misorientation develops due to plastic deformation within grains and additionally due to...
-
Interdependency between Electron Backscatter Diffraction-Based Misorientation Parameters and Coincidence Site Lattice Boundaries in 316LN Stainless steel
The effect of two varying strain levels (3 and 5%) produced by cold rolling and two solution-annealing heat treatment temperatures (1173 and 1273 K)...
-
Investigation of Grain Misorientation on Creep Void Nucleation in P91 Heat-Resistant Steel by Experimentation and Crystal Plasticity Simulation
Heat-resistant steels are candidates for pipes under high-temperature corrosion conditions owing to their good high-temperature thermal strength,...
-
In-situ study of the effect of grain boundary misorientation on plastic deformation of Inconel 718 at high temperature
The effect of the grain boundary (GB) misorientation on plastic deformation of Inconel 718 (IN718) alloy was investigated in this paper, using...
-
Effect of the Parameters of Grain Misorientation in Multicrystalline Silicon on the Formation of the SEM Image Contrast
AbstractIn this paper, we analyze the contrast of images obtained by scanning electron microscopy (SEM) in the backscattered electron mode, which...
-
Austenite Morphology and Distribution Dependence of Impact Toughness in S32101 Duplex Stainless Steel Laser Welds
In this study, S32101 duplex stainless steel (DSS) was welded by laser and then subjected to post-weld heat treatment (PWHT) at 1100 °C for various...
-
Quasi in situ study on the correlation between slip** deformation and residual stress distribution in electronic copper strip
We used quasi in situ method to investigate the correlation between slip** deformation behaviors and residual stress in electronic copper strips....
-
Misorientation Characteristics at the Growth Front of Abnormally-Growing Goss Grains in Fe–3%Si Steel
AbstractPenetrating morphologies at the growth front of abnormally-growing Goss grains in Fe–3%Si steel was examined in view of the possibility that...
-
Characterization of deformation structures in P-22 Cr–Mo steel through electron backscatter diffraction and transmission electron microscopy
AbstractIn this paper, the deformation mechanisms of a Fe–2.25%Cr–1%Mo (P22) steel are studied after tensile tests at room temperature (RT) and...
-
Effect of Initial Orientation on Microstructural Evolution of Aluminum Single Crystals During Hot Deformation
The predominant crystallographic relations between dynamic recrystallization (DRX) nuclei and simple deformation structures have been characterized... -
Variant Pairing Quantification Method for a Bainitic HSLA Steel
Variant pairing describes the preference of variant pairs during displacive transformations. It is a decisive factor on the morphology and boundary...
-
-
Penetration-Dependent Microstructures in TiO2-Induced Weld Metal of EH36 Shipbuilding Steel
Microstructural characteristics has been investigated along the weld metal penetration of EH36 shipbuilding steel processed by CaF 2 –30 wt. pct TiO 2 ...
-
Microstructure and Texture Correlation with Mechanical Properties and Formability of Friction Stir-Welded AA5754 Sheets
Friction stir tailor-welded blanks are often used in the production of complex-shaped components such as structural and automotive parts for their...
-
EBSD characterisation of grain size distribution and grain sub-structures for ferritic steel weld metals
Microstructural characterisation of engineering materials is required for understanding the relationships between microstructure and mechanical...
-
Void Nucleation in a Through Silicon Via (TSV): Unraveling the Role of Tilt Grain Boundaries Through Atomistic Investigation
Through Silicon Via (TSVThrough silicon via (TSV)) is a technique used in three-dimensionalThree-dimensional (3D) integrated circuit (IC) packaging... -
Mechanisms of the Formation and Accumulation of Misorientations in Deformable Metals and Alloys
Abstract —The formation of misoriented substructures in plastically deformable metal materials is theoretically studied. Expressions are obtained for...
-
Improvement of sulfide stress corrosion cracking resistance of the Inconel 625/X80 weld overlay by post-weld heat treatment
The effect of post-weld heat treatment (PWHT) on the microstructure, penetration and distribution of hydrogen, and sulfide stress corrosion cracking...
-
Automated classification of granular bainite and polygonal ferrite by electron backscatter diffraction verified through local structural and mechanical analyses
Differentiation of granular bainite and polygonal ferrite in high-strength low-alloy (HSLA) steels possesses a significant challenge, where both...
-
High-Resolution Diffraction Imaging of Misorientation in Ni-Based Single Crystal Superalloys
In the present work, the novel high-resolution X-ray diffractionX-ray diffraction imaging technique for imaging misorientationMisorientation and...