Search
Search Results
-
In-Situ Observation of Melting and Solidification Process of CuCr Alloy by High Temperature Confocal Microscope
In this paper, the melting process of CuCr alloyCuCr alloy is observed in-situ by high temperature confocal microscopeHigh temperature confocal...
-
Dependence on Their Mn and Cr Contents of the Microstructures, Melting Range, and High Temperature Creep Behaviors of Cantor’s Alloy and Versions Strengthened by MC Carbides
Decreasing Mn and increasing Cr in the cast Cantor’s alloys and in their MC–strengthened versions may have consequences on the refractoriness and on...
-
Intermediate Low-Melting-Temperature Solder Thermal Cycling Enhancement Using Bismuth and Indium Microalloying
In general, Sn-Ag-Cu solder is widely used for interconnections in semiconductor device packaging. However, recently, several factors have been...
-
A Boron-Free Ni-25Cr-6P-3Si Amorphous Brazing Foil with a Melting Temperature of 985 °C
The demand for Ni-based brazing filler metals with melting temperatures below 1000 °C and good corrosion resistance is increasing because lower...
-
Estimation of Spatio-temporal Temperature Evolution During Laser Spot Melting Using In Situ Dynamic X-Ray Radiography
A novel approach to estimate the sub-surface temperature (and thermal gradient) distribution during melting/solidification and its time evolution...
-
Simulation on Temperature in Channel of Three-Phase Induction Channel Furnace for Steel Melting Using COMSOL Multiphysics and Taguchi Method
Induction channel furnaces (ICF) are widely used for melting, holding and casting metals and alloys in many processing industries because it has...
-
Self-Diffusion Coefficient of Liquid Magnesium near the Melting Temperature
AbstractMulticomponent aluminum-based alloys are important in various industries. The percentage of the base component with various impurities and...
-
Correlation and Prediction of Molten Steel Temperature in Steel Melting Shop Using Reliable Machine Learning (RML) Approach
In a steel melting shop, liquid steel temperature is the foremost parameter for casting quality products and uninterrupted operation. In this paper,...
-
Effect of Austempering Temperature on Microstructure and Deformation Behavior of Selective Laser Melting 24CrNiMo-Steel
The influence of austempering temperature on the microstructure evolution and tensile deformation behaviour of 24CrNiMo samples prepared by selective...
-
Corrosion Protection of a VZhM4 Alloy in the Temperature Range 850–1050°C
Abstract —The results of comparative studies of the efficiency of using a number of serial ion-plasma aluminide coatings to protect a VZhM4 alloy from...
-
3D skyrmion strings and their melting dynamics revealed via scalar-field electron tomography
Two-dimensional skyrmion, a topological spin texture, has been extensively investigated in non-centrosymmetric magnets. It is thermodynamically...
-
Effect of Cu Particles on the Properties of Sn-Bi-Pb Low-Melting-Point Alloys
The microstructure, phase composition, melting characteristics, and mechanical properties of Sn40Bi40Pb low-melting-point alloys with different...
-
Investigation of Nitinol Alloy Deformation Features in Temperature Range from 500 to 950°C
A basic technological scheme is provided for production of metal products from NiTiNOL alloy, including stages of workpiece manufacture, then a...
-
Effect of Asymmetric Bottom Blowing on Melting Behavior of Steel Scrap in a Converter
The stirring energy of bottom blowing is one of the most important factors affecting the steel scrap melting in converter. In this paper, a...
-
A review on structural characteristics and thermoelectric properties of mid-temperature range Chalcogenide-based thermoelectric materials
AbstractSeveral affordable and pollution-free technologies have drawn a lot of attention because of the pressure of our energy needs and...
-
Ultra-High-Temperature Ceramic Coatings ZrC, ZrB2, HfC, and HfB2
Ultra-high-temperature ceramic coatings are a fast-develo** field of study with a broad variety of applications. Due to their exceptional physical...
-
Effect of Hydrogen-Rich Atmosphere on Softening and Melting Behaviors of Ferrous Burden in Blast Furnace Cohesive Zone
To evaluate the effect of hydrogenHydrogen-rich smeltingSmelting on the softening and melting behaviorsSoftening and melting behaviors of the ferrous...
-
Structural Analysis of the Interface of Contact Melting between AMg6 and Zn-Based Alloys
AbstractWe study the processes of the contact melting of AMg6 alloy with a solid Zn–Cu–Al solder and a model Zn–Al alloy, as well as the structure of...
-
A Model for the Melting of Pure Metals
AbstractA model for calculating the latent melting heat of pure metals in the process of their fusion with consideration for the phonon “Casimir...
-
On surface pre-melting of metallic nanoparticles: molecular dynamics study
Employing the isothermal molecular dynamics and the embedded atom method, we simulated melting of metallic nanoparticles (Au, Ag, Cu, Ni, and Pb...
