Search
Search Results
-
Statistic law of change in lifetime of carbyne-graphene nanoelements and similar low-dimensional nanostructures
It is exhibited that failure of carbyne-graphene nanoelements and similar low-dimensional nanostructures at thermo-mechanical loading is stochastic...
-
Mathematical Statistics for Measuring Steel Temperature in Steel-Teeming Ladle and Tundish at Continuous Steel Teeming
AbstractThe article considers the temperature distribution in steel at its continuous teeming. The temperatures were measured sequentially in the...
-
Mathematical Regression and Artificial Neural Network for Prediction of Corrosion Inhibition Process of Steel in Acidic Media
Present work reports the results of the corrosion current density of mild steel in acidic solution as a function of acid concentration, inhibitor...
-
Prediction of Fill Factor and Charge Density of Self-Shielding Flux-Cored Wire with Variable Composition
The use of exothermic addition (EA) for charge in flux-cored wire is a promising way to improve technological characteristics of welded joints. The...
-
Analysis and Mathematical Simulation of Formation Regularities of Strip Transversal Profile during Hot Rolling
AbstractThe transversal profile features of sheet products have been analyzed. A significant influence of edge drops on the accuracy and metal loss...
-
Multi-objective Optimization in Selective Laser Melting of AlSi10Mg Alloy Based on Response Surface Methodology
In this study, a method combining full-factorial experiment and response surface methodology was developed to simultaneously optimize the density and...
-
An Integrated Mathematical Model for Ironmaking Blast Furnace
This paper presents an integrated model by combining the raceway combustion model, the process model, and the hearth flow and heat transfer model for...
-
Investigation of Thrust Force, Drill Bit Temperature and Burr Height in the Drilling of Aluminum Alloy Used in Ammunition Wing Drive Systems
In this present study, the effect of drilling parameters and carbide drill bits in drilling of Al 5083 H116 alloy was investigated. The drilling...
-
Modelling and Optimization for Thrust Force, Temperature and Burr Height in Drilling of Custom 450
The low heat conduction values and high mechanical properties of stainless steels, which have high resistance to corrosion, make them difficult to be...
-
A practical proposal for silver nanoparticles (Ag-NPs) separation by differential centrifugation
The interaction of nanomaterials with biomolecules can be enhanced and amplified when the nanomaterials have specific sizes and shapes; for this...
-
Experimental Analysis of Different Dental Implants Surfaces by Using Optical Methods
In this paper a novel topographical investigation of eight different biphasic implants was performed by using an interferometric and confocal...
-
Pre-construction Complexity Factors Affecting Cost Performance of Infrastructure Projects
Cost overruns are typical in infrastructure projects all around the world. However, previous studies have shown a lack of understanding of the term...
-
Clustering analysis of grid nanoindentation data for cementitious materials
Nanoindentation technology is an advanced method to explore the microscopic mechanical properties of layer or block materials. Grid nanoindentation...
-
Effect of Infill Line Direction on Tensile and Flexural Properties of Poly(Lactic Acid) Samples during 3D Printing
Polymer-based materials are emerging as a promising alternative to traditional materials in the aerospace and automotive industries. The growth of 3D...
-
Assessment of the Adequacy of the Model for Determining the Composition and Properties of Final Slag in a Blast Furnace
The correctness of the calculated composition and characteristics of the final slag at a blast-furnace engineer’s workstation is assessed. The...
-
Monte Carlo-Based Stochastic Finite Element Model for Electromigration in the Interfaces of SAC Solder and Cu Conductors with Uncertainties in Boundary Conditions
The time-dependent progress of electromigration (EM) in the interfaces of Sn-Ag-Cu solder and Cu conductors is sensitive to the uncertainties in...
-
Modeling the Dynamic of a SAG Milling System Through Regression Models and Neural Networks
Due to the growth of the worldwide copper industry and the increase complexity of this process in front of feeding mineralogy and the cost...
-
Introduction to Reliability Engineering
Assessing and improving reliability is the foundation of maintenance management and these processes are underpinned by exhaustive data collection and...
-
Interface Optimisation of Dissimilar Wire Arc Additive Manufactured Wall Through ANN-TOPSIS Conjugate Algorithm
The development of functionally graded structures (FGS) through the wire arc additive manufacturing (WAAM) technique is frequently associated with a...
-
Damage Analysis of Carbon Fiber-Reinforced Thermoplastic Laminates under Bending Based on Acoustic Emission and Digital Image Correlation
Carbon fiber-reinforced thermoplastic composites have become very popular as a kind of high-performance composite materials, which is widely used to...
