Search
Search Results
-
Wear/Erosion Resistant High-Temperature Coatings
Numerous mechanical parts, including, rotary vanes, emission and intake blowers, rotor rings, boiler tubes, steam turbines, gas turbines, pulverized...
-
Coatings for High-Temperature Environments Anti-Corrosion and Anti-Wear Applications
This book addresses the recent trends in high-temperature coatings that are used to provide oxidation and wear resistance to metallic/ceramic...
-
High Temperature and Lubricating Wear Behaviour of In-Situ Al-20Mg2Si Composite
This study investigates the tribological behaviour of Al-20Mg 2 Si composite having potential applications in automobiles. A pin-on-disc apparatus was...
-
Microstructure, High-Temperature Wear, and Corrosion Behaviors of UNS R56320-xWC Composite Fabricated through Powder Metallurgy
Microwave sintering (MS) technology is used to fabricate UNS R56320 (Ti-3Al-2.5V)-xWC composite at 1200 °C. In the matrix, tungsten carbide (WC) is...
-
Effect of Molybdenum Contents on Microstructure and High-Temperature Wear Behavior of SiMo Ductile Iron
High-silicon and molybdenum (SiMo) ductile iron is a common heat-resistant alloy that may be exposed to high-temperature wear during service in many...
-
Effect of Bionic Units Fabricated by WC-NiCrBSiFe Laser Cladding on High-Temperature Erosion Wear Resistance of 304 Stainless Steel
To improve the high-temperature erosion wear resistance of 304 stainless steel, this study designed and fabricated bionic samples based on the...
-
Effect of Banded Structure on the Cr–Ni–Mo–V Steel High-Temperature Frictional and Wear Performance
Cr–Ni–Mo–V steels usually exhibit excellent performance under high-temperature friction and wear conditions. However, after hot rolling with a...
-
Influence of Vanadium Carbide as an Anti-wear Reinforcement in Zirconia-Toughened Alumina for High-Temperature Tribological Application
The influence of vanadium carbide (VC) addition in synthesized zirconia-toughened alumina (ZTA) has been explored toward development of a novel...
-
Influence of Cooling Rate and Alloying by “Cr, V, and Ni” on Microstructure and High-Temperature Wear Behavior of SiMo Ductile Iron
SiMo ductile irons, typical heat-resistant materials, are subjected to varied wear environments during operation in high-temperature applications....
-
Wear behavior at high temperature of ZrO2–Y2O3 (YSZ) plasma-sprayed coatings
The wear behavior of two plasma-sprayed zirconia–yttria coatings was studied at high temperatures. Agglomerated and sintered, as well as fused and...
-
An Investigation on Room and High Temperature Wear Performance of Fe-45%WC Hardfaced Coating Applied on Ductile Cast Iron
In this study, Fe-45%WC hardfacing coating was applied using flux core welding wire on ductile cast iron substrate by the GTAW process....
-
High Temperature Sliding Wear Behaviour of Ti6Al4V Thermal Oxidised for Different Oxidation Durations
Most of the available literature discusses the room temperature tribological behaviour of thermal oxidation (TO) treated Ti6Al4V. There is only a few...
-
Study on high-temperature erosive wear behaviour, surface roughness and scratch resistance of NiCrAlY-based composite coating
This study concentrates on NiCrAlY-based coating with nano-boron carbide and cenosphere particles. The composition of NiCrAlY, B 4 C and cenosphere are...
-
High-Temperature Friction Wear Behavior of (AlB2 + Al2O3)/A356 Composites Regulated by Acoustic-Magnetic Coupling Field
In this paper, the A356-B 2 O 3 -KBF 4 system was designed, and (AlB 2 + Al 2 O 3 )/A356 in situ dual-phase reinforced particle composites with mass fractions...
-
Tribological Performance and Wear Mechanism of Laser Cladded NiCrAl-WC Coatings at High-Temperature
NiCrAl-WC coatings with different WC contents were prepared on AISI H13 steel by laser cladding (LC) to improve its wear resistance at high...
-
Fretting wear behaviors and mechanism of a high Nb–TiAl alloy with full lamellar microstructure at ambient temperature
The fretting wear behaviors and mechanism of a high Nb–TiAl alloy with full lamellar microstructure at ambient temperature were investigated. The...
-
Comparison of the Sliding Wear of Single-Phase F.C.C Carbon-Doped Fe40.4Ni11.3Mn34.8Al7.5Cr6 and CoCrFeMnNi High-Entropy Alloys at Cryogenic Temperature
The sliding wear behavior of pins of the face-centered cubic high-entropy alloys (HEAs), carbon-doped Fe 40.4 Ni 11.3 Mn 34.8 Al 7.5 Cr 6 (CHEA) and...
-
The Boriding Process for Enhancing the Surface Properties of High-Temperature Metallic Materials
High-temperature metallic materials operate in environments with a broad spectrum of mechanical and chemical conditions, originating typical failures...
-
Wear- and High-Temperature-Resistant IGNs/ Fe3O4/PI Composites for Triboelectric Nanogenerator
The high wear and temperature resistance of electrode materials are the key issues to extend the application of triboelectric nanogenerators (TENG)....
-
Effect of Microwave Hybrid Heating on High-Temperature Adhesive Wear Behavior of High-Velocity Oxygen Fuel-Sprayed WC-CrC-Ni and WC-Co/NiCrFeSiB Coatings
HVOF-processed coatings are chemically inhomogeneous and are not metallurgically bonded to the substrate. As a result, components coated with HVOF...
