Search
Search Results
-
Effect of Solution Heat Treatment (Temperature and Time) on Microstructure and Properties of Al–Cu–Mg Alloy
This research paper examines the effect of different solution heat treatments parameters (temperature and time) on Al–3.39%Cu–2.26%Mg (wt%) alloy’s...
-
Effect of heat-treatment temperature and residence time on microstructure and crystallinity of mesophase in coal tar pitch
This study aimed to identify and analyze the effects of both isothermal heat treatment temperature and residence time on the formation of mesophase...
-
Heat Treatment
The plastic deformation of metal under the action of applied forces is of great importance in the fabrication of metals to any desired shape. When it...
-
Development of an Alternative Heat Treatment to the Traditional T6 Heat Treatment of AlSi10Mg Alloy Produced by Additive Manufacturing
In this study, alternative solution heat treatments, applied at lower temperatures and shorter times, were applied to AlSI10Mg samples produced with...
-
Effect of Alloying Time and Heat Treatment on Microstructure and Tribological Properties of Mechanical Alloyed Cu-Al-Ni Shape Memory Alloy
In this study, the effects of milling time and heat treatment on microstructure and wear behavior of Cu-Al-Ni shape memory alloys produced by the...
-
Optimization of the Post-Heat Treatment of Additively Manufactured IN718
Inconel 718 has good fabricability, high strength at elevated temperatures, and high corrosion resistance and is widely deployed in many aerospace...
-
Development of Mg-Based Superelastic Alloy Through Aging Heat Treatment
The effect of agingAging heat treatmentHeat treatment on microstructure, hardness, and superelasticitySuperelasticity at room temperature was...
-
Microstructure Evolution Behavior of Titanium Microalloyed Steel during Heat Treatment
To study the microstructure evolution behavior of titanium microalloyed steel during heat treatment, we studied the effects of different heat...
-
Critical Heat Transfer Coefficients for Selection of Quench Media during Heat Treatment of Steels
The depth of hardness in during quench hardening of steels depends on the steel composition, section thickness, and the boundary heat transfer...
-
Prediction of Cross-Section-Dependent ADI Microstructures by Experimental Heat Treatment Simulation
Heavy section Austempered Ductile Iron (ADI) components may contain pearlitic or a mixed microstructure (mixture of pearlite and ausferrite) in their...
-
Cyclic Deformation Behavior of Silafont®-36 Cast Aluminum Alloy After T5 Heat Treatment
With superior tensile strength and improved fatigue performance of Silafont®-36 alloy in the as-cast state, this study is aimed to evaluate these...
-
Effect of Post-weld Heat Treatment on Microstructure and Mechanical Properties of P91 Heat-Resistant Steel Coating on Mild Steel
P91heat-resistant steel was deposited on mild steel using cold metal transfer (CMT) arc cladding to enhance oxidation resistance and extend service...
-
Effect of Heat Treatment on the Structure and Properties of a D16 Aluminum Alloy
AbstractHeat treatment conditions are chosen in accordance with alloys and production method of blanks and parts made from them. The heat treatment...
-
Improving creep strength of the fine-grained heat-affected zone of novel 9Cr martensitic heat-resistant steel via modified thermo-mechanical treatment
The infamous type IV failure within the fine-grained heat-affected zone (FGHAZ) in G115 steel weldments seriously threatens the safe operation of...
-
Achieving Fine-Grained Microstructure and Superior Mechanical Property in a Plain Low-Carbon Steel Using Heavy Cold Rolling Combined with Short-Time Heat Treatment
A new thermomechanical process consisting of heavy cold rolling (HCR) and short-time heat treatment (STH) is developed to fabricate fine-grained...
-
Processing Techniques of Magnesium Matrix Composites and Its Heat Treatment—A Review
The present study covers the different processes to manufacture different magnesium matrix composites (MMCs) and different conditions for its heat...
-
Effect of Heat Treatment on the Shear Strength of SiC/PyC/SiC Composites
In this study, the influence of heat treatment on the shear strength of SiC/SiC composites at room temperature and its causes were investigated....
-
Increasing Energy Efficiency by Optimizing Heat Treatment Parameters for High-Alloyed Tool Steels
In the paper industry, machine circular knives are used in the cutting process to provide industrial quality cuts on a variety of products. In the...
-
High-Superelasticity NiTi Shape Memory Alloy by Directed Energy Deposition-Arc and Solution Heat Treatment
Directed energy deposition-arc (DED-Arc) technology has the advantages of simple equipment, low manufacturing cost and high deposition rate, while...
-
Optimization of the Heat Treatment of a Hard Magnetic Fe–30Cr–16Co–1Sm Powder Alloy
AbstractThe optimization of heat treatment of an anisotropic hard magnetic Fe–30Cr–16Co–1Sm powder alloy is performed by experimental design using...
