Search
Search Results
-
Effect of Plastic Deformation on Microstructure and Properties of Cu-(1 wt%–6 wt%) Ag Alloy
In the present study, the Cu-(1 wt%–6 wt%) Ag alloys were prepared by melting, forging and wire drawing. The effects of plastic deformation on...
-
Ag and Cu whisker formation in Ag–Cu–Te alloys
Long Ag and Cu whiskers are found in Ag–Cu–Te alloys annealed at 400 and 600 °C. Depending upon the nominal compositions of the alloys, there are...
-
High-Temperature Interaction between Carbon Fibers and Cu–Ag Eutectic Alloy
AbstractHigh-temperature interaction of 30 wt % Cu–70 wt % Ag eutectic alloy with carbon fibers was studied. It was shown that Cu–Ag drops coated...
-
Effect of Thermal Cold Cycling on the Microstructure and Properties of Al–Cu–Mg–Ag Alloy
To study the effect of thermal cold cycling on the microstructure and properties of Al–Cu–Mg–Ag alloy, hardness and tensile tests, resistivity tests,...
-
Effect of solute atom gradient segregation structure and twin spacing on mechanical properties of nanotwin Cu-Ag alloy
Using the molecular dynamics simulation method, nanoindentation simulation was carried out on a variety of nanotwin Cu-Ag alloys with different...
-
Effect of Secondary Aging on Microstructure and Properties of Cast Al–Cu–Mg–Ag Alloy
The Al–Cu–Mg–Ag alloy after secondary aging of T6I4 was investigated by hardness measurement, tensile test, friction and wear test, exfoliation...
-
Phase transformation of Ag–Cu alloy nanoparticle embedded in Ni matrix
In the present study, various (Ag–Cu) nanoalloy particles are embedded in the Ni matrix and synthesized by rapid solidification, namely...
-
Fabrication and In Vitro Biocompatibility Evaluation of Zr48Cu36Al9Ag7 Amorphous Alloy Scalpel
Zirconium based amorphous alloys are suitable for biomedical applications because of their excellent corrosion resistance and biocompatibility. In...
-
Non-reciprocal Heterogeneous Nucleation in Solidification of Ag–Cu Alloys
AbstractTaking Ag-27 at% Cu hypoeutectic and Ag-67 at% Cu hypereutectic alloys as examples, a theoretical criterion was established based on the...
-
The Effect of Termomechanical Treatment on the Low-Cyclic Fatigue Behavior in an Al–Cu–Mg–Ag Alloy
AbstractThe mechanical behavior under monotonic and cyclic loadings has been studied in an Al–4.5Cu–0.56Mg–0.77Ag–0.42Mn–0.12Ti–0.05V–0.02Fe (wt %)...
-
Effect of Ni on the wetting and brazing characterization of 304 stainless steel by Ag–Cu alloy
The effect of Ni in Ag–Cu filler on the wetting and brazing characterization of stainless steel was studied by means of wetting test and brazing test...
-
Thermal Stability of Nanocrystalline Ag–Cu–Al Alloy Films with Densely Dispersed Alumina Particles Prepared via Reactive Sputtering Using Ar–O2 Mixed Gas
To address the challenges associated with the fabrication of highly O 2 -permeable Ag membranes suitable for on-site and downsized O 2 separators for...
-
Enhanced Microstructural and Performance Characteristics of Cu–18 Pct Ag Composites Through Elemental Additions
Cu–Ag in-situ composites, renowned for their amalgamation of high strength and superior electrical conductivity, find extensive applications as...
-
Effect of Changes in Phase and Grain Interface on Physical Properties During Aging of Ultra-Deformation Cu-Ag Alloy Wires
In order to obtain high strength and high conductivity and simultaneous kee** enough elongation copper alloy wires, the physical properties of... -
Microstructure and properties evolution of in-situ fiber-reinforced Ag−Cu−Ni−Ce alloy during deformation and heat treatment
Silver-based alloys are significant light-load electrical contact materials (ECMs). The trade-off between mechanical properties and electrical...
-
Ag-Cu-Hf-Ta-Ti
This chapter provides the structural and mechanical properties of Ag-Cu-Hf-Ta-Ti alloys containing different ratios of the element. X-ray diffraction... -
Effects of Aging Temperature on the Mechanical Properties and Precipitation Behavior of a Pre-strained Al–Cu–Mg–Ag Alloy
AbstractIn this work, effects of artificial aging temperature on the mechanical properties and precipitation behavior of a pre-strained Al–Cu–Mg–Ag...
-
Biocompatible Ti3Au–Ag/Cu thin film coatings with enhanced mechanical and antimicrobial functionality
BackgroundBiofilm formation on medical device surfaces is a persistent problem that shelters bacteria and encourages infections and implant...
-
Estimation of the structure of binary Ag–Cu nanoparticles during their crystallization by computer simulation
Binary nanoparticles of an alloy of copper and silver are of great practical interest due to the possibility of fine tuning the plasmonic effects...
-
Use of Eutectic Effects in the Possible Creation of Phase-Change Memory Cells Based on Ag–Cu Nanoclusters
AbstractAn attractive trend in the further progress of nanoelectronics is the development of a new generation of non-volatile memory devices, namely...