Search
Search Results
-
Influence of Metal Casting Temperature and Cations on Phase Transformation of Silica Sand to Cristobalite
Due to its thermodynamic stability, silica sand is traditionally used during the metal casting process in foundries. The sand-casting process...
-
Investigation of the Possibility of Using High-Clay-Mineral Opal-Cristobalite Rocks for Fine Purification of Water from Highly Soluble Organic Compounds
The chemical and mineralogical compositions were investigated and the limit adsorption of methylene blue were determined on samples of...
-
Molecular Dynamics Modeling of SiO2 Melts and Glass Formation Processes
AbstractMolecular dynamics (MD) with ReaxFF potentials is used to study the melting process of quartz and cristobalite together with the amorphous...
-
TGO Growth Behavior in Environmental Barrier Coatings with Modified Silicon Bond Coat
Yb 2 Si 2 O 7 /Si bilayer environmental barrier coatings (EBCs) are widely studied for the protection of SiC-based ceramic matrix composites (CMCs). One...
-
Luminescence of Oxygen-Deficient Centers in Quartz Glasses
AbstractThis paper presents the results of studying the absorption, luminescence, and excitation spectra of oxygen-deficient centers (ODCs) in...
-
Electroporcelain Based on Raw Materials of Uzbekistan
The results of investigations of the preparation of electrical porcelain based on available customary raw materials of Uzbekistan are presented. It...
-
Ceramic Body Based on Kaolin – Alumina-Containing Waste – Dolomite System
The article investigates the high-temperature interaction and sintering processes of samples of low-temperature firing high-alumina for technical...
-
Physicochemical and Environmental Features of Rice Husk Ash from Brazil to Use in Cement Materials
The rice beneficiationBeneficiation process annually produces tons of rice husk ashAsh (RHA). In this work, RHA from companies in southern Brazil is... -
Crystallization of Sodium Borosilicate Glass with the Addition of Cr2O3
AbstractGlass composition of 6Na 2 O 22B 2 O 3 ·70SiO 2 ·2Cr 2 O 3 is studied by scanning electron microscopy, X‑ray powder diffractometry (XRPD), and...
-
Effect of Chemical Production Waste — Aluminum–Alkali Sludge on the Phase Composition of Porcelain Stoneware
This paper discusses the influence of aluminum–alkali sludge and chemical production waste on the phase composition of porcelain stoneware based on...
-
Transformation Mechanisms of Cemented Silica and Crystalline Silica to Tridymite in Silica Bricks
Abstract: Silica bricks with cemented silica and crystalline silica as raw materials show different properties. In this paper, the phase and...
-
Preparation and high-temperature properties of skin–core structure SiC ceramic fibers
A new type of skin–core structure SiC ceramic fibers was prepared from polycarbosilane by employing the curing process of alternating air and vacuum...
-
Phase Transformations in the Diatomite-Orthophosphoric Acid System on Heating at 800 – 1400°C
Properties of diatomite from the Il’yinsk deposit (Sverdlovsk region) and the effect of orthophosphoric acid (OPA) on it are studied. It is...
-
Wollastonite-Containing Composite Material from Rice Straw
AbstractUsing rice straw as a source of silicon, a new composite material containing wollastonite CaSiO 3 , silicon dioxide SiO 2 , and an organic...
-
Processes in Ceramic Material, Based on Raw Materials with Heightened Fe2O3 Content, at Temperatures 950 – 1050°C
M125-make ceramic brick based on low-grade clay (loess loam) was obtained using overburden pyrite copper-zinc ore at firing temperature 1000°C....
-
Production of glass ceramic from rice husk and periwinkle shells
Glass ceramic was produced by replacing the major glass forming materials, silica and calcium oxide, with derivates from rice husk and periwinkle...
-
Indirect forming of alumina-based ceramics by selective laser sintering combined with sol infiltration process and performance study
Aluminum-based ceramic cores have been widely used in the manufacture of aero-engine hollow blades because of their excellent chemical stability,...
-
Thermal Stability of Composites and Coatings Based on MoSi2–B–Al2O3 When Heated in Air to 1600°C
The thermal stability of materials based on MoSi 2 –B–Al 2 O 3 was established in a wide temperature-time interval. New oxide phases were formed as...
-
Integrated Experimental and Thermodynamic Modeling Investigation of Phase Equilibria in the PbO–MgO–SiO2 System in Air
Magnesium oxide-based refractory materials are used industrially to contain the chemically aggressive slags present in lead smelting systems. In the...
-
Influence of Al2O3 content on mechanical properties of silica-based ceramic cores prepared by stereolithography
Silica ceramic cores have played an important part in the manufacture of hollow blades due to their excellent chemical stability and moderate...