Search
Search Results
-
Effect of Cu/Mg Ratio on Microstructure and Corrosion Resistance of Al-Cu-Mg-Li cast Alloy During Non-Isothermal Aging
This study investigated the influence of non-isothermal aging (NIA) on microstructure, mechanical properties, and corrosion resistance of Al-Cu-Mg-Li...
-
Effect of Li Micro-Alloying on Microstructure and Corrosion Resistance of Non-Isothermal Aged Al–Cu–Mg Cast Alloy with Different Cu/Mg Ratios
This study investigated the effect of Li micro-alloying on microstructure, mechanical properties, and corrosion resistance of artificially aged...
-
Effect of Minor Sc Addition on the Microstructure Evolution of Al–Cu–Li–Mg Alloy During Homogenization with Different Cooling Modes
The microstructure evolution and mechanical properties of Al–3.92Cu–1.10Li–0.68Mg–0.32Ag–0.23Mn–0.35Zn–0.11Zr and...
-
Excellent Strength–Ductility–Corrosion Resistance Combination of Li Micro-alloying and Severe Plastic Deformation of Al-Cu-Mg Alloy
This study investigated the effect of severe plastic deformation induced by friction stir back extrusion on microstructure, mechanical properties,...
-
Nano-amorphous—crystalline dual-phase design of Al80Li5Mg5Zn5Cu5 multicomponent alloy
The design of metallic materials with high strength, high ductility, and high thermal stability has always been a long-sought goal for the materials...
-
Microstructural evolution, precipitation behavior and mechanical properties of a novel Al–Zn–Mg–Cu–Li–Sc–Zr alloy
Microstructural evolution, precipitation behavior, mechanical properties and strengthening mechanism of a novel Al–Zn–Mg–Cu–Li–Sc–Zr alloy...
-
Dislocation-Induced Precipitation and Its Strengthening of Al–Cu–Li–Mg Alloys with High Mg
Generally, the good combination of pre-deformation and aging can improve the mechanical strength of the Al–Cu–Li–Mg alloys. However, the effects of...
-
Cu/Li Ratio on the Microstructure Evolution and Corrosion Behaviors of Al–xCu–yLi–Mg Alloys
The microstructure evolution and the corrosion feature of Al– x Cu– y Li–Mg alloys ( x : y = 0.44, 1.65 and 4.2) were systematically investigated under the...
-
Effect of TiC Content on Tensile Properties, Bend Strength, and Thermal Conductivity of Al-Li-Cu-Mg-Zr Alloy/TiC Composites Produced by Accumulative Roll Bonding
Composite strips based on an Al-Li-Cu-Mg-Zr alloy reinforced with titanium–carbide (TiC) microparticles were manufactured through the accumulative...
-
On the microstructural characteristics and mechanical properties of Al−2Li−2Cu−0.5 Mg alloy: the role of Yb additions
Potential industrial applications of high-performance cast Al−Li−Cu−(Mg) alloys micro-alloyed with Sc have been strongly limited due to the extremely...
-
Diffusion Bonding Process and Interface Performance of 2198 Al-Li Alloy
The diffusion bonding process can take full advantage of 2198 Al-Li alloy to produce high-efficiency integral structures. However, the dense and...
-
Recycling of LiCoO2 Battery Cathode Material Through Aluminothermic Reduction Using Aluminum Waste Chips
The global increase in electric vehicles (EVs) uptake accelerates the number of End-of-life (EOL) lithium-ion batteries (LIBs) to be managed and...
-
Hot Compressive Deformation Characteristics of Al-9.3Zn-2.4Mg-1.1Cu Alloy
To understand the hot compression deformation characteristics of the self-developed Al-9.3Zn-2.4Mg-1.1Cu alloy, the hot compression tests of...
-
Protective Micro-Arc Oxidation Surface Coating on AZ80 Forged Magnesium Alloy
Magnesium alloysMagnesium alloy, with a high weight-to-strength ratio, have attracted considerable attention for lightweight applications, especially...
-
Anisotropy of mechanical properties of 2297-T87 Al–Li alloy thick plates
The tensile properties of 2297-T87 Al–Li alloy thick plates at different thickness position and in different direction were analyzed via tensile...
-
Development of Mg-Based Superelastic Alloy Through Aging Heat Treatment
The effect of agingAging heat treatmentHeat treatment on microstructure, hardness, and superelasticitySuperelasticity at room temperature was...
-
The Li stance on precipitation in Al–Li-based alloys: an investigation by X-ray Raman spectroscopy
Decomposition and precipitation processes in a binary Al–Li alloy and a technical Al–Li–Cu–Mg alloy were investigated using differential scanning...
-
Improving heat resistance of Al–Cu–Li alloy with the addition of Sc and Si
Al–Cu–Li alloys are important third-generation aluminum–lithium alloys in the aerospace field; however, they suffer from a service temperature below...
-
Hydrometallurgical Ni/Co/Mn Alloy Dissolution from Spent Catalyst Tailings
This research paper describes the efforts conducted for the recovery of Ni, Co, Mn, and V from tailings of spent catalyst recycling operations. The...
-
Effect of Calcium Microalloying on the Service and Corrosion Properties of V1341 Alloy Sheets
AbstractThe influence of calcium microalloying on the texture of aluminum Al–Mg–Li and Al–Mg–Si–Cu alloys is studied. The paper considers the...
