Search
Search Results
-
The Strengthening Role of Cryogenic Treatment in the Mechanical Properties and Abrasive Wear of Low Alloy Wear-Resistant Steel
The effects of cryogenic treatment on the mechanical properties and abrasive wear resistance of the low alloy wear-resistance steel are investigated....
-
Impact-abrasive Wear Behavior of ZTA and NbC Reinforced Fe60 Matrix Composites
The impact-abrasive wear behavior of ZTA (zirconia toughened alumina) particle(ZTAp) and NbC particle (NbCp) reinforced Fe60 matrix composites...
-
Waviness Affects Friction and Abrasive Wear
Abrasive wear can have a detrimental effect on machinery, especially in the mining and construction industries. To prolong machinery lifetime and cut...
-
Size Effect of Impact Abrasive Particles on Wear and Surface Hardening Behavior of High-Manganese Steel
The size effect of impact abrasive particles on wear and surface hardening behavior of high-manganese steel was studied. Impact wear tests were...
-
The Impact Abrasive Wear Resistance and Mechanical Properties of In Situ NbC-Reinforced H13 Steel Composites
H13 steel is a common material for the cutter ring of tunnel boring machines, and it can affect the engineering cycle due to its high wear loss...
-
Assessment of the Microstructure and Abrasive Wear Properties of an A380/NbC Aluminum Composite Produced by Stir Casting
Aluminum matrix reinforced with carbide powders is considered one of the best ways to improve abrasion resistance in pure alloys. Thus, this study...
-
Abrasive Wear Behavior of Nano-Sized Steel Scale on Soft CuZn35Ni2 Material
This study examines the abrasive wear behavior of nano-sized steel scale on the CuZn35Ni2 Soft material. CuZn35Ni2 Soft material was used as a...
-
Influence of Counter-Face Grit Size and Lubricant on the Abrasive Wear Behaviour of Thermoplastic Polymers Reinforced with Glass Fibres
Thermoplastic composite materials are widely used for aerospace, automobile and structural applications due to their good combination of high...
-
Microstructure and Abrasive Wear Properties of WC/Fe Matrix Composites Under Different Preform Wall Thicknesses
In this paper, preforms with three-dimensional structures and different thicknesses were constructed by 3D printing technology, and WC particle...
-
Influence of Load and Sliding Velocity on Abrasive Wear of Polyester Composites Reinforced with Bio-Particulates as Filler Material
With the escalating industry-wide requirement and based on the inherent properties, recently the polymeric composite is in more demand for...
-
Abrasive Wear Mechanism of Polymer Composites with a Dispersed Filler
This paper describes the abrasive wear mechanism of dispersed-filler epoxy-based composites, which includes the removal of anti-abrasive filler...
-
Morphology Microstructure and Mechanical Properties of Fe25/WC/TiC Coating and Abrasive Wear Properties Under Dry/Wet Sand Conditions
To address the issue of low surface hardness and poor wear resistance of 45# steel, this study applied laser cladding technology to prepare three...
-
Abrasive Wear Resistance and Tribological Characteristics of Electrometallized Composite Coatings
We investigate coatings sprayed by the electric-arc method from solid and powder wires, and study their structure, mechanical properties, and...
-
Friction and Wear in Metals
This book focuses on tribology in manufacturing processes from the viewpoint of sliding friction fundamentals, the use of lubricants to control...
-
Influence of Heat and Cryogenic Treatments on the Abrasive Wear Behavior of H13 Tool Steel
This study analyzes the influence of cryogenic treatments, before the pre-tempering treatment on the microstructure, and the mechanical properties of...
-
Abrasive Wear Behavior of Fe-Based Amorphous/Nanocrystalline Coatings Deposited by High-Velocity Oxygen Fuel and Wire Arc Spray
Abrasive wear behavior of high-pressure high-velocity oxygen fuel (HP-HVOF) and wire arc spray (WAS) iron-based coatings were compared....
-
Atomic-Scale Study of Grain Boundary Evolution in the Abrasive Wear of An Al–Li Alloy
In the present work, the atomic-scale study of grain boundary evolution in the abrasive wear of an Al–Li alloy was conducted. The results showed that...
-
Evaluation of Wear Measurement with Radioactive Isotopes for DLC Coatings Affected by Abrasive Particles
Diamond-like carbon (DLC) coatings protect engine parts from wear and provide low-friction. Unfortunately, the nature of DLC coatings does not allow...
-
Effect of Impact Angle and Speed, and Weight Abrasive Concentration on AISI 1015 and 304 Steel Exposed to Erosive Wear
This study investigated parametrically the erosive wear behavior of AISI 1015 and 304 steel in different environmental conditions. The erosive wear...
-
High-Speed Rubbing Behavior of Abrasive Coating Coated on Titanium Alloy Blade Tips
In aero-engines, abrasive coatings are typically utilized to protect the blade tip from excessive wear caused by the harder abradable sealing coating...