Search
Search Results
-
Influence of Mn on the precipitates in 6082 aluminum alloy
The study systematically examined how Mn impacts the precipitates and mechanical properties of 6082 aluminum alloy during the peak state of...
-
Effect of Lanthanum on Secondary Phase Modification and the Mechanical Properties of 6082 Aluminum Alloy
The effect of the rare earth element La on α -Al grain refinement, secondary phase modification, and the mechanical properties of 6082 aluminum alloy...
-
Technology for the Producing Calibrated Bars Made of Aluminum Alloy 6082 Prepared Using Ingotless Rolling-Pressing
The article provides results of experimental studies for production of hot-pressed and calibrated bars made of alloy 6082 by a method of ingotless...
-
Tensile Deformation Behavior of 6082-T6 Aluminum Alloy After Repair Welding by Metal Inert Gas Process
This study investigates the microstructure and mechanical properties of 6082-T6 aluminum alloy base metal (BM) and repair welds (RW) made using...
-
Evaluation of Wire Electrical Discharge Machining Performance Features on EN AW-6082 T6 Aluminum Alloy and Optimization of Machining Characteristics
Wire electrical discharge machining (WEDM) has become the most important advanced production technology compared to other methods. The major goal of...
-
Metallurgical and Mechanical Characterization of MIG Welded Repair Joints for 6082-T6 Aluminum Alloy with ER 4043 and ER 5356
In this study, the aluminum alloy 6082-T6 was repaired by metal inert gas (MIG) welding using the alternative fillers ER 4043 and ER 5356. The...
-
Computation of Properties for a Friction Stir Welded 6082 Aluminum Alloy Using Artificial Neural Network Model
This paper identifies the effect of two different non-consumable tools with different shoulder geometries (Raised and Recced) on aluminum alloy...
-
Effect of Mn Content on Quench Sensitivity of 6082 Alloys
EN AW 6082EN AW 6082 alloys are used in many different areas from construction to automotiveAutomotive industry. EN AW 6082EN AW 6082 alloys have one...
-
Development of EN AW-6082 Metal Foams and Stochastic Foam Modeling for the Individualization of Extruded Profiles
Lightweight design and hybrid components enable innovative and new component concepts, especially when combining structurally reliable metal...
-
Investigation of Two Laser Heat Treatment Strategies for Local Softening of a Sheet in Age-Hardening Aluminum Alloy by Means of Physical Simulation
Car manufacturers increasingly aid high-strength aluminum alloys for their advantageous weight-to-strength ratio, but their limited formability poses...
-
On the Room- and Elevated-Temperature Tensile Properties of Hot-Rolled 6082 Alloys Containing Thermally Stable Dispersoids
The microstructural evolution and room/elevated-temperature tensile properties of Al-Mg-Si 6082 alloys subjected to thermomechanical processing...
-
Influence of Cantor Alloy Particles on Microstructure, and Wear Behavior of Aluminum Metal Matrix Composite
The performance of industrial tribo-systems depends on advanced composites with superior tribological characteristics. In this study, the CoCrFeMnNi...
-
AMAG CrossAlloy®—A Unique Aluminum Alloy Concept for Lightweighting the Future
Increasing requirements to reduceReduce CO2 emissionsEmissions by using high scrap rates while maintaining the same high material properties...
-
Microstructure and mechanical properties of laser-MIG hybrid multi-layer welded joints for 20-mm thick aluminum alloy plates
Laser-MIG hybrid multi-layer welding was performed upon the 20-mm thick 6082-T6 aluminum alloy butt-joints. The weld formation, microstructure, and...
-
Influence of Process Parameters on Temperature Field, Microstructure, and Mechanical Properties of FSW Thick Aluminum Alloy 2219
The fuel tank of the heavy launch vehicle is made of high-strength aluminum alloy 2219 with a thickness of 18 mm. The assembly process is mainly...
-
Investigating the Impact of Friction Stir Processing on the Hydrogen Embrittlement in AA6082-T6 Heat-Treatable Aluminum Alloy
This study investigates the impact of friction stir processing (FSP) on the hydrogen embrittlement (HE) in AA6082-T6 heat-treatable aluminum alloy....
-
Effect of Different Cryogenic Rolling Strains on the Impact Properties of 6082 Aluminum Alloy
The demand for light-weight materials, exhibiting superior strength and higher toughness, has increased attention to cryogenic temperature rolling as...
-
Effect of Conventional and Pulsed TIG Welding on Microstructural and Mechanical Characteristics of AA 6082-T6 Repair Welds
Repair welding of AA 6082-T6 joints was carried out using ER 4043 filler through the TIG welding process with or without pulsed current....
-
Computational Modeling of Magnetic Pulse Dissimilar Alloys Welding: Aluminum Alloy 6082-T6 and HC420LA Steel
The use of lightweight materials such as high-strength steel, aluminum alloys, and composites is increasing. The joints of dissimilar alloys as the...
-
Friction Stir Welding Operating Window for Aluminum Alloy Obtained by Temperature Measurement
Finding the process parameters (advancing and rotational speed) in FSWFriction stir welding (FSW) is the key to construct an operating window based...