Search
Search Results
-
Heat Treatment Effects on the Microstructure, Mechanical and Wear Properties of an Al 2024 Cold Spray Additive Manufactured Deposit
The impact of high-speed micron-sized metallic particles during cold spray additive manufacturing (CSAM) often leads to non-uniform plastic...
-
Improved Creep and Tensile Properties of a Corrosion Resistant Ni-Based Superalloy Using High Temperature Aging and Nb/Ta Additions
Resistance to creep deformation is essential for cast and wrought Ni-based superalloys in next generation energy systems due to the considerable...
-
Microstructure and mechanical properties stability of pre-hardening treatment in Al–Cu alloys for pre-hardening forming process
The stability of the microstructure and mechanical properties of the pre-hardened sheets during the pre-hardening forming (PHF) process directly...
-
Performance of Laser Deposited Inconel 625 Coating During Heat Treatment and Carbonisation
Laser cladding system available at the CSIR South Africa was used to laser clad Inconel 625Inconel 625 on 304L SS substrate. The produced clad was... -
Tailoring Grain Size and Precipitation via Aging for Improved Elastocaloric Stability in a Cold-Rolled (Ni,Cu)-Rich Ti–Ni–Cu Alloy
Critical challenges remain in applying shape memory alloys to solid-state refrigeration. In particular, addressing the degradation of elastocaloric...
-
Effects of Solution Temperature and Aging Time on the Microstructure and Mechanical Properties of TG6 Titanium Alloy
This paper studies the effects of solution and aging treatment on the microstructure and mechanical properties of TG6 titanium alloy systematically....
-
Molecular Dynamics Simulation of Hygroscopic Aging Effects in Epoxy Polymer
The automobile industry is incorporating more lightweight content in car designs to boost fuel-economy. New structural adhesives are needed to...
-
Unraveling the Effect of Long-Term Aging on Hydrogen-Aided Cracking Behavior in a Maraging Stainless Steel
Hydrogen embrittlement (HE) behavior strongly threatens the safety of metallic structural materials. In this study, the HE resistance of Custom 465...
-
Investigation of the Effect of 475 °C Aging Treatment on Mechanical Properties of a Fe–19Cr–5.5Al ODS Alloy Using Tensile, Impact and Small Punch Tests
The effect of thermal aging on the mechanical properties of a Fe–19Cr–5.5Al oxide dispersion strengthened (ODS) hot rolled steel plate was evaluated....
-
Heat-Treatment Design of LATZ9531 Alloy and Ensuing Structure–Properties Correlation
The effect of solid solution and aging treatment on microstructure evaluation and resulting mechanical properties of as-cast...
-
Effect of Cryogenic Treatment After Full Solution on Rejuvenation of Exposed IN738LC Gas Turbine Blade
In this research, the samples were exposed to full and partial solution heat treatments and quenched in the air and nitrogen each period. Also, one...
-
Rapid design of secondary deformation-aging parameters for ultra-low Co content Cu-Ni-Co-Si-X alloy via Bayesian optimization machine learning
It is difficult to rapidly design the process parameters of copper alloys by using the traditional trial-and-error method and simultaneously improve...
-
Effects of heat treatment on microstructures and properties of a heterostructured alloy with dissimilar components fabricated by WAAM
Heat treatment significantly influences homogeneous material microstructures and mechanical properties, which can be improved by an optimal heat...
-
Analysis of Heat Treatment and Its Effects on the Machinability of Inconel 718 Products Manufactured with Wire and Arc Additive Manufacturing Technique
This work analyzes the effects of different heat treatments on Inconel 718 samples produced with the Wire and Arc additive manufacturing (WAAM)...
-
Microstructures and Mechanical Properties of the TiC/CM247LC Nickel-Based Composite Fabricated by Selective Laser Melting: Effect of Heat Treatment
In this study, TiC/CM247LC nickel-based composite was successfully prepared by selective laser melting, then was heat treated at a solid solution...
-
Effect of Post-Weld Heat Treatment on the Microstructure and Mechanical Properties of ERNiCrMo-3 Weld Metals
A investigation was done to determine the effect of post-weld heat treatment on the microstructure and mechanical properties of ERNiCrMo-3 weld...
-
The effect of solution and aging treatments on the microstructure and mechanical properties of a selective laser melted CoCrMo alloy
Selective laser melted (SLMed) CoCrMo alloy specimens were subjected to solid solution and aging treatments, and then, their microstructure evolution...
-
Effect of Heat Treatment on the Microstructure and Mechanical Properties of Mg-6Zn-1Al-0.3Mn Magnesium Alloy
The microstructure and mechanical properties of Mg-6Zn-1Al-0.3Mn under different heat treatments were investigated. The results show that the...
-
Processing, Microstructure Evolution, and Heat Treatment Response of AA2024 and Its Metal Matrix Composites of In Situ TiB2 Dispersoids
Aluminum-based metal matrix composites (MMCs) have drawn considerable attention in aerospace applications due to their superior mechanical...
-
Effect of Solution Annealing Treatment Parameters on Sensitization Behavior of SS321
Stabilized SS321 can get sensitized during multi-pass welding, due to dissolution of TiC and subsequent chromium carbide precipitation in the...