Search

Search Results

1. Preparation and performance study of ZnWO₄/TiO₂/MoS₂ ternary composite photocatalyst

   The ZnWO ₄ /TiO ₂ /MoS ₂ (ZTM) ternary composite catalyst was prepared based on the excellent performance binary photocatalyst semiconductor ZnWO ₄ /TiO ₂ ...

   Hanbi Zhang, **angchun Liu, ... Ziyao Wei in Journal of Materials Science

   Article 18 December 2023
   

2. Drilling of GFRP with Liquid Silicon Rubber Reinforced with fine Aluminium Powder on Hole Surface Quality and Tool Wear using DOE

   The efforts are made to study the effect of machining parameters: speed, feed, tool tip angle, and tool material on hole quality: surface finish, and...

   Giridhar S. Kulkarni, N. G. Siddeshkumar, ... R. Suresh in Journal of Bio- and Tribo-Corrosion

   Article 20 June 2023
   

3. Layered Composite Materials Based on Ti/Ta/Hf/Ceramic for Operation under Extreme Conditions

   Abstract

   Ti/Ta/Hf/Ni/ceramic layered composite materials are produced via the self-propagating high-temperature synthesis (SHS) of prestructured...

   O. K. Kamynina, S. G. Vadchenko, ... D. V. Prokhorov in Journal of Surface Investigation: X-ray, Synchrotron and Neutron Techniques

   Article 18 October 2023
   

4. Reduced graphene oxide correlated electrochemical energy storage behavior of La₂MnFeO₆/rGO composite microspheres

   The study focuses on the microstructural and electrochemical properties of pristine La ₂ MnFeO ₆ (LMFO) and La ₂ MnFeO ₆ /rGO composite. The powder X-ray...

   Renu Dhahiya, Neetika Chauhan, Ashok Kumar in Journal of Materials Science: Materials in Electronics

   Article 01 April 2024
   

5. In situ preparation of Ti/CaB₆ composites via powder metallurgy: microstructure, mechanical and tribological properties improvement

   Titanium (Ti) alloys suffer from poor mechanical strength and inferior wear resistance. Herein, we introduced the calcium hexa boride (CaB ₆ ) into Ti...

   **nxin Wu, Yu Pan, ... **n Lu in Journal of Materials Science

   Article 10 January 2023
   

6. Synthesis of a Composite Containing Sialon Based on Aluminum Ferrosilicon and Nanosized Microsilica in a Combustion Regime

   A composite containing sialon (β-sialon) and nitride phases (β-Si ₃ N ₄ , Si ₂ N ₂ O) is prepared by self-propagating high temperature synthesis from a...

   K. A. Bolgaru, A. A. Reger, V. I. Vereshchagin in Refractories and Industrial Ceramics

   Article 01 May 2023
   

7. Synthesis of an Fe/Al composite nanocatalyst with improved catalytic stability for ammonium perchlorate decomposition

   Transition metals (TMs) have an excellent catalytic effect on the thermal decomposition of ammonium perchlorate (AP). However, nanosized TM catalysts...

   Zhipeng Cheng, **gzhou Yin, ... Lili Zhang in Journal of Materials Science

   Article 02 June 2023
   

8. Fabrication and Characterization of High-strength Water-soluble Composite Salt Cores via Layered Extrusion Forming

   This paper presents a novel process for preparing high-strength water-soluble salt cores with complex structure via layered extrusion forming using K ₂ SO...

   Zheng Chen, Suo Fan, ... Zitian Fan in International Journal of Metalcasting

   Article 28 June 2022
   

9. Obtaining Aluminum – Matrix Composite Materials Particulate-Reinforced with Ceramic Particles

   Increased resistance to heat is an important requirement for the creation of promising materials and their products. This requirement is potentially...

   M. L. Khazin, R. A. Apakashev, S. Ya. Davydov in Refractories and Industrial Ceramics

   Article 01 September 2022
   

10. High-performance martensitic stainless steel nanocomposite powder for direct energy deposition prepared by ball milling

    Direct energy deposition (DED) has great potential for the production of stainless steel matrix nanocomposite parts. However, the propensity of...

    Zhen Wang, Shu-Rong Xu, ... Jun Liu in Rare Metals

    Article 29 March 2023
    

11. Fabrication and Application of Graphene-Composite Materials

    In recent years, the research on the preparation and categorization of the compositesComposite from grapheneGraphene is increasing widely as...

    Manish Srivastava, Bharti Mehlawt, ... Nirmala Kumari Jangid in Advanced Composites

    Chapter 2024
    

12. Characteristics and Microstructure of 7055 Al Alloy Powder Prepared by Nitrogen Atomization

    The defects, particle size, microstructure, solidification rate and thermal stability of nitrogen atomized 7055 Al alloy powder were systematically...

    Jian Ren, Hao Meng, ... Yan Feng in Transactions of the Indian Institute of Metals

    Article 26 October 2023
    

13. Self-lubricating Composite: A New Generation Metal Metrix Composite for Efficient Tribological Application

    In a highly developed contemporary society, transport, power generation, and production are essential industrial activities associated with movable...

    Sweta Rani Biswal, Seshadev Sahoo in Processing and Characterization of Materials

    Conference paper 2023
    

14. Gallium-Based Metallic Pastes: Preparation from Powder Mixture by In Situ Synthesis of Liquid Component

    The paper presents a method for the synthesis of metal pastes and diffusion-hardening alloys based on gallium by intensive vibrational mixing of...

    Alexey Shubin, Ivan Gilev in Transactions of the Indian Institute of Metals

    Article 05 January 2024
    

15. On Mechanical, Morphological, and Fracture Properties of Sustainable Composite Structure Prepared by Materials Extrusion-Based 3D Printing

    Previous studies have reported that PLA-Al-based composite-based structures may be used in aerospace, automobiles, and biomedical applications. The...

    Ankan Shrivastava, Jasgurpreet Singh Chohan, Ranvijay Kumar in Journal of Materials Engineering and Performance

    Article 09 August 2023
    

16. Densification Kinetics of the TiB₂–20 wt.% MoSi₂ Composite During Nonisothermal Spark Plasma Sintering

    The densification of a powder mixture containing titanium diboride and 20 wt.% molybdenum disilicide during nonisothermal spark plasma sintering was...

    M. S. Kovalchenko, R. V. Lytvyn, ... O. B. Zgalat-Lozynskyy in Powder Metallurgy and Metal Ceramics

    Article 01 May 2023
    

17. Analysis of electromagnetic shielding performance of waste rubber powder-based flexible composites

    Waste tire management has escalated in recent years with the continuous increase in automobile production. Every year, ~ 1.5 billion tires are...

    Shweta Kaushal, Anisha Chaudhary, S. R. Dhakate in Journal of Materials Science: Materials in Electronics

    Article 13 October 2022
    

18. Microstructure and Properties of Powder Composites with Aluminum Matrix Reinforced with Carbon Nanomaterials

    The structure and properties of powder composites with an aluminum matrix reinforced with carbon materials of two types, i.e., nanotubes (CNT) and...

    Utpal Kumar Roy, Subrata Mondal in Metal Science and Heat Treatment

    Article 01 July 2022
    

19. Friction Stir Processing of Recycled Titanium Reinforced A356 Composite Developed Through Stir Casting

    Titanium is a well-known material which is highly used in manufacturing now a days. The extracts coming out during manufacturing, especially...

    Anand Besekar, M. Kathiresan, R. Jose Immanuel in Transactions of the Indian Institute of Metals

    Article 27 December 2023
    

20. Development of aluminum composite reinforced with selected agricultural residues

    The use of agricultural residue has been considered an economic and environmentally friendly approach for development of aluminium composites. In...

    L. Osunmakinde, T. B. Asafa, ... M. O. Durowoju in Discover Materials

    Article Open access 21 December 2023