Search

Search Results

1. Effects of B₂O₃, TiO₂, and ZnO on the Performance of Fe-Based Diamond Cutting-Tool Matrix

   To improve the service performance of diamond cutting tools under dry working conditions, three oxides (B ₂ O ₃ , TiO ₂ , and ZnO) were innovatively used...

   Jianan Zhang, Longchen Duan, ... Hui Gao in Journal of Materials Engineering and Performance

   Article 21 December 2022
   

2. Study of the Wear Resistance Plasma Nitrided GGG60 by Optimization of Surface Treatment Conditions Using Response Surface Methodology

   In this study, the wear performance of spheroidal graphite cast iron subjected to plasma nitriding at different temperatures and treatment durations...

   İsmail Aykut Karamanli, Mustafa Sabri Gök, ... Okan Ünal in International Journal of Metalcasting

   Article Open access 29 March 2024
   

3. Investigation of Dry Sliding Wear Behavior of Different Diamond Segments with Response Surface Methodology

   In this study, it is aimed to determine the dry sliding wear resistance of marble cutter, concrete cutter, and granite cutter segments, which are...

   Bilal Kursuncu, Azmi Erdoğan, ... Gizem Yılmaz in Journal of Materials Engineering and Performance

   Article 03 April 2023
   

4. Spheroidization of Particles in Tool Cutting Plates Made of Powder Hard Alloys

   Abstract —The problems of forming the structure of heterogeneous powder materials of tool plates are considered. A high-quality powder material is...

   V. A. Skryabin, A. E. Zverovshchikov in Russian Metallurgy (Metally)

   Article 01 December 2023
   

5. Evaluation of the Structural Characteristics and Wear Performance of the Novel ECAR-Processed AA5083 Alloy

   Commercially available AA 5083 alloy was processed by a novel equi-channel angular rolling (ECAR) using copper shielding on either side of the alloy...

   Kottapalli Venkatesh, Swami Naidu Gurugubelli in Transactions of the Indian Institute of Metals

   Article 17 January 2024
   

6. Microstructure Evolution and Enhanced Wear Resistance of Al₂CrFeNiMo High Entropy Alloy Coating Fabricated by Laser Cladding

   In order to enhance the hardness and wear resistance of Cr12MoV, Al ₂ CrFeNiMo was designed and successfully prepared by laser cladding. Phase,...

   Yali Gao, Sicheng Bai, ... Dongdong Zhang in Journal of Thermal Spray Technology

   Article 29 April 2024
   

7. Fabrication and Wear Characteristics of Al8011/ZTA/GP/Ti6Al4V Hybrid Composites Using Ultrasonic-Assisted Stir Casting

   Technological advancements in material science are imperative to develo** efficient and lightweight materials for various technological sectors...

   Gollapinni Gowthami, Jeevan Vemula in Journal of Bio- and Tribo-Corrosion

   Article 17 June 2024
   

8. Microstructure and Wear Performance of Fly Ash-Reinforced Copper Matrix Composites Prepared via Powder Metallurgy

   This research work investigated the role of fly ash particles (0, 5, 10, 15 and 20 wt.%) on the microstructural evolution and the wear resistance...

   Isaac Dinaharan, Thangadurai Albert, Jebaraj David Raja Selvam in Journal of Materials Engineering and Performance

   Article 20 November 2023
   

9. Metallurgical Aspects and Wear Performance of Al/(Fe–Cu)_p Hybrid Composite Produced Using Friction Stir Processing

   Al1050/(Fe–Cu) hybrid surface composite was produced using friction stir processing (FSP). The effects of the weight fraction ratio of Fe and Cu...

   Mehran Karimi Estahbanati, Mojtaba Movahedi in Metals and Materials International

   Article 31 July 2023
   

10. Understanding of the Microstructure Evolution and Wear Resistance of Cr12MoV Die Steel during Deep Cryogenic Treatment

    The present study investigated the influence of deep cryogenic treatment (DCT) on the microstructure evolution and wear resistance of Cr12MoV die...

    Caidong Zhang, Jie Li, ... Yue Song in Journal of Materials Engineering and Performance

    Article 28 February 2024
    

11. Load-dependent Finite Element Wear Simulation of Semi-Metallic and Ceramic Friction Materials Using ANSYS

    Ceramic brake pads are the most recent advancement in brake pad technology due to their high material quality, effectiveness, and longevity. This...

    Ashish Saurabh, Kartik Joshi, Piyush Chandra Verma in Transactions of the Indian Institute of Metals

    Article 22 March 2023
    

12. Adhesive Wear Failures

    Friction and wear are important when considering the operation and efficiency of components and mechanical systems. Among the different types and...

    Bojan Podgornik in Journal of Failure Analysis and Prevention

    Article 23 February 2022
    

13. Triboinformatic Machine Learning Model for Frictional Behavior and Wear Volume Loss Prediction of SS316L Alloy Clad with WC/NiCrBSi

    This study uses a laser cladding approach to clad NiCrBSi and reinforced WC particles on SS316L. The wear characteristics of a laser cladded material...

    Lakshmi Manasa Birada, Vyshnavi Pullela, Babu Rao Thella in Journal of Bio- and Tribo-Corrosion

    Article 02 July 2024
    

14. The Role of Manufacturing Techniques in Reciprocating Wear of Carbide-Reinforced Ni-Co-Cr-Mo-Cu Alloys

    Finding the correlation among manufacturing process, microstructure and mechanical properties is critical to design the high-performance alloy. In...

    Chao Li, Biaobiao Yang, ... Yun** Li in Journal of Materials Engineering and Performance

    Article 22 November 2023
    

15. Mechanical and Sliding Wear Performance of ZA27-Gr Alloy Composites for Bearing Applications: Analysis Using Preference Selection Index Method

    In this chapter, the sliding wearSliding wear and mechanicalMechanical performancePerformance of Gr -ZA-27 alloyZA-27 alloy compositesAlloy...

    Ashiwani Kumar, Mukesh Kumar in Advanced Composites

    Chapter 2024
    

16. Investigation of Adhesion and Tribological Performance of CrN-, AlTiN-, and CrN/AlTiN-Coated X45CrMoV5-3-1 Tool Steel

    Monolayer (CrN, AlTiN) and bilayer (CrN/AlTiN) coatings were deposited on the surface of X45CrMoV5-3-1 (DIN 1.2999) tool steel by Cathodic Arc...

    Gülşah Aktaş Çelik, Konstantinos Fountas, ... Anna D. Zervaki in Journal of Materials Engineering and Performance

    Article 11 January 2023
    

17. Characterization and Wear Behavior of NiCrMoSiC Microwave Cladding

    A microwave hybrid heating technique has been employed to develop NiCr-Mo-SiC composite cladding on titanium alloy (Grade-5/Ti-6Al-4 V/Titan-31). The...

    H. Sharanabasava, C. Durga Prasad, M. R. Ramesh in Journal of Materials Engineering and Performance

    Article 28 February 2023
    

18. Comprehensive Study on Tool Wear During Machining of Fiber-Reinforced Polymeric Composites

    The use of fiber reinforced polymeric (FRP) composites has increased rapidly, especially in many manufacturing (aerospace, automobile and...

    Sikiru Oluwarotimi Ismail, Shoaib Sarfraz, ... Essam Shehab in Machining and Machinability of Fiber Reinforced Polymer Composites

    Chapter 2021
    

19. Study on Equilibrium and Non-equilibrium Solidification of Boron-Containing High-Speed Tool Steel: Effect of Cooling Rate and Microstructure Investigation

    This work intends to understand the microstructure evolution of new and enhanced boron-containing high-speed tool steel. The solidification reactions...

    Hossam Halfa in Metallography, Microstructure, and Analysis

    Article 08 May 2023
    

20. Tool Life Monitoring in End Milling of AISI H13 Hot Work Die Steel Using a Low-Cost Vibration Sensor Connected to a Wireless System

    Machining of complex components with high added value requires the development and implementation of technologies for monitoring the processes...

    P.I.A. Vianello, A.M. Abrão, ... I.C. Pereira in Experimental Techniques

    Article 01 November 2022