Search
Search Results
-
Enhancing the Intergranular Corrosion Resistance of the Al–Mg–Si Alloy with Low Zn Content by the Interrupted Aging Treatment
AbstractThe intergranular corrosion (IGC) resistance of the Al–Mg–Si alloy with low Zn addition treated by the interrupted aging treatment (T6I6) was...
-
Optimization of the Post-Heat Treatment of Additively Manufactured IN718
Inconel 718 has good fabricability, high strength at elevated temperatures, and high corrosion resistance and is widely deployed in many aerospace...
-
Cyclic Deformation Behavior of Silafont®-36 Cast Aluminum Alloy After T5 Heat Treatment
With superior tensile strength and improved fatigue performance of Silafont®-36 alloy in the as-cast state, this study is aimed to evaluate these... -
Effect of Low Aging Temperature and Reversion of α′-martensite on the Fracture Behavior of a 2304 Lean Duplex Stainless Steel
The effects of cold rolling, leading to strain-induced α’-martensite transformation and its subsequent reversion during annealing treatment, were...
-
Effect of Solution Temperature on the Microstructure Evolution and Tensile Properties of GH4175 Superalloy
In the present study, GH4175 superalloy was treated in the solution temperature range of 1100 ℃–1160 ℃ for 2 h, followed by unified aging treatment... -
Microstructure and Hardness Investigation of Tribaloy Alloy T-400C Hardfacing Deposited on Nickel-Based Alloy Inconel 740H via Plasma Transferred Arc Welding Subjected to Long-Time Aging
Tribaloy alloy T-400C hardfacing deposited on Inconel 740H alloy via plasma transferred arc (PTA) welding has potential applications for...
-
Effect of cell size on the response to solution and aging heat treatments of open-cell Al-4.5Cu (wt.%) foams
Open-cell Al-4.5Cu (wt.%) foams were produced by the replication casting technique in cell sizes of 2.00–2.38 and 3.35–4.75 mm. The fabricated foams...
-
Effect of Long-Term Thermal Aging at 680 °C on Microstructure and Mechanical Properties of P92 Steel
The stability of microstructure and performance after long-term service are crucial for the engineering application of ASME SA335-P92 steel. In this...
-
Effect of Heat Treatment on Microstructure and Mechanical Properties of a Precipitation-Hardened Stainless Steel Prepared by Selective Laser Melting
In this paper, the effect of heat treatment on the microstructure and mechanical properties of SLMed corrax (CX) stainless steel was investigated....
-
Effect of Room-Temperature Pre-rolling and Pre-cryorolling on Natural Aging and Bake Hardening Response of an Al–Mg–Si Alloy
AbstractThe auto industry makes extensive use of Al–Mg–Si alloys. This study investigated the effect of pre-cryorolling and room-temperature...
-
Phase Transformations during Aging of Aluminum Hydroxide Precipitated by Hydrogen Peroxide
AbstractA method for the precipitation of aluminum hydroxide from a low-concentration sodium aluminate solution by the addition of hydrogen peroxide...
-
Effect of Solution Heat Treatment (Temperature and Time) on Microstructure and Properties of Al–Cu–Mg Alloy
This research paper examines the effect of different solution heat treatments parameters (temperature and time) on Al–3.39%Cu–2.26%Mg (wt%) alloy’s...
-
Microstructure evolution and growth kinetics of intermetallic compound in SAC305/Ag and SAC305/Cu solder joints during solid-state aging
Microstructure evolution and growth kinetics of intermetallic compound (IMC) in Sn-3Ag-0.5Cu (SAC305) /Ag and SAC305/Cu solder joints were...
-
Aging elevates chemical short-range order and twinning stress in a CrCoNi medium-entropy alloy
Nanoindentation has been widely used to study the effect of chemical short-range order (CSRO) on the strength of high- and medium-entropy alloys...
-
Heat Treatment Simulation of Aluminum Alloy Wheels and Investigation of Process Steps
T6 heat treatment is usually applied to Al-Si-Mg alloy parts. This process can be modeled and solved by computer simulations for reduced experimental...
-
Effect of low aging temperature and the reversion of martensite on the mechanical behavior of a 2304 lean duplex stainless steel
The effect of aging temperature on martensite reversion and mechanical behavior of a 2304-lean duplex stainless steel (LDSS) was analyzed after cold...
-
Investigation on the Effect of Retrogression and Re-aging on Microstructure and Mechanical Properties of 2024 Aluminum Alloys
In the current study, a new artificial aging process, Retrogression and re-aging (RRA), which is a multi-step precipitation hardening, was utilized...
-
Precipitation Behavior and Strengthening Mechanism of Extruded 2196 Al-Cu-Li Alloy Plate during Multi-Step Age-Hardening Treatment
In order to reveal the precipitation behavior and strengthening mechanism of extruded 2196 Al-Cu-Li alloy plate during aging treatment, one-step and...
-
Shine a light on papyrus: monitoring the aging process
The aging behavior of ancient papyri is not entirely understood, although such understanding is crucial for tailored conservation concepts to...
-
Role of Direct Aging and Solution Treatment on Hardness, Microstructure and Residual Stress of the A357 (AlSi7Mg0.6) Alloy Produced by Powder Bed Fusion
Applying additive manufacturing (AM) technologies to the fabrication of aluminum automotive components, with an optimized design, may result in...