Search
Search Results
-
Structural characteristics and tribological properties of an ultrafine-grained Al–40Si–5Fe coating prepared by supersonic plasma spraying
AbstractHigh silicon aluminum alloy coatings (HSAACs) are characterized by high surface hardness and excellent wear resistance, and the fineness has...
-
Corrosion behavior of pure Ti under continuous NaCl solution spraying at 600 °C
The corrosion behavior of pure Ti under continuous NaCl solution spraying at 600 °C, compared with that under solid NaCl deposit film in H 2 O + O 2 ...
-
Highly Sensitive LaFeO3 Coatings Deposited by Solution Precursor Plasma Spraying for Isoamyl Alcohol Detection
The development of one-step deposition technology for metal oxide-based coatings is significant for the rapid fabrication of gas sensors. Gas sensors...
-
High-Velocity Arc Spraying of Fe-based Metallic Glasses with High Si Content
Various feedstocks are available for the thermal spraying of metallic glasses, which are often alloyed with high amounts of cost-intensive elements....
-
Detonation Spraying of a Cermet Coating to Improve the Surface Properties of Tool Steel Parts Produced by the Selective Laser Melting Process
In this study, a novel attempt was made to deposit 86WC-10Co-4Cr cermet layer on 1.2709 tool steel substrate prepared by selective laser melting...
-
DC Plasma Spraying, Fundamentals
This chapter deals essentially with the fundamentals of the DC plasma-spraying technology highlighting the principal concepts of DC plasma torch... -
Study on Construction Mechanism of Ceramic–Metal Thermal Barrier Coating System by Plasma Spraying
A unique construction mechanism is present in the plasma-spraying process of the ceramic–metal thermal barrier coating (TBC) system. This study...
-
Effect of Spraying Power on Microstructure, Corrosion and Wear Resistance of Fe-Based Amorphous Coatings
The porosity and oxide content in high-velocity oxy-fuel (HVOF)-sprayed amorphous coatings usually show opposite dependence on spraying parameters...
-
Induction Plasma Spraying
Induction plasma spraying (IPS), commonly identified as radio frequency induction plasma spraying (RF-IPS), inductively coupled plasma spraying... -
Microstructure and Wear Behavior of Al0.25CoCrFeNiSi0.6 High-Entropy Alloy Coating Deposited on Stainless Steel by Detonation Spraying
In this work, the morphology, microstructure, and phase composition of Al 0.25 CoCrFeNiSi 0.6 high-entropy alloy coating (HEAC) deposited on stainless...
-
Numerical study on the behavior of titanium particles in the process of warm spraying
The flame flow characteristics, combustion mechanism, and particle flight behavior of warm spraying have been studied to broaden the warm spraying...
-
Effect of Thermal Spraying Method, Time and Temperature on the Thickness of Thermally Grown Oxide and Lifetime of Thermal Barrier Coatings
This paper investigates various parameters affecting the thickness of the thermally grown oxide (TGO) layer affecting the lifetime of conventional...
-
Energy-Saving Technology of Assorted Glassware Decoration by Plasma Spraying
An energy-saving technology for decorating assorted glassware by plasma spraying of colored assorted and container glasses was developed. The optimal...
-
Effects of Spraying Parameters on the Velocity of HVOF-Sprayed Particles Based on the PIV Method
High-velocity oxygen fuel thermal spraying is widely used in industrial production, and coating hardness and density are closely related to the...
-
Wear and Corrosion Resistance Performance of Iron-Based Metallic Amorphous Coating Produced by Twin Wire Arc Spraying
The wear and corrosion resistance of an Fe 54 Mo 9 Cr 15 C 6 P 2 Si 2 B 3 W 9 amorphous metallic coating deposited on the C45 steel by twin wire arc-spraying...
-
Effect of Substrate Heating on Corrosion Behavior of Nickel Coated on AISI 1020 Steel by Cold Gas Dynamic Spraying
In cold spraying, formation and adhesion of the coating is mainly due to the kinetic impact of the powders as they im**e on the substrate, at...
-
Wear and Corrosion Resistance of TiN/PEEK Composite Coatings Fabricated by Gas Twin-Tunnel Plasma Spraying
TiN/PEEK composite coatings were prepared on carbon steel substrates (0.45 wt% C) by a plasma-spraying technique by injecting TiN and PEEK powders...
-
Effect of plasma spraying parameters on wear and scratch resistance of Al2O3-40 Wt.% YSZ ceramic coatings deposited on Ti-6Al-4 V alloy
Plasma-spraying ceramic coatings are widely employed in plenty of practical applications, where superior tribological properties and resistivity...
-
Influence of Melt Composition on the Formation of Powder Particles When Spraying High-Alloy Steels with High-Pressure Water
The influence of chemical composition on the formation of powder particles during the water atomization of stainless steel was investigated. The...
-
Formation of Structure in Articles from Steel 316L Obtained by Cold Gas-Dynamic Spraying
Specimens from steel 316L obtained by four variants of cold gas-dynamic spraying of powders and subsequent hot isostatic pressing at a temperature of...