Search

Search Results

1. Investigation of Indentation Type Surface Defect on Interstitial Free Galvannealed Steel Sheet During Zinc Coating

   The market capitalization of the coated sheets is continuously increasing in the automotive exposed and non-exposed panels such as door inner panels,...

   Kayyam Sai Pranay Teja, Soumendu Monia, ... Anup Kumar in Journal of Failure Analysis and Prevention

   Article 18 September 2023
   

2. Modified sheet resistance and specific contact resistance of Ni-, Pt- and Ti-based contacts to n-type 3C-SiC

   Abstract

   The modified sheet resistance, R _sk , and specific contact resistance, ρ _c , of Ni-, Pt- and Ti-based contacts to n-type 3C-SiC have been...

   Patrick W. Leech, Martyn H. Kibel, Phillip Tanner in MRS Advances

   Article 27 May 2021
   

3. Degradation evolution and mechanism of sheet molding compound with variable composition exposed to acid solution environment

   In the present work, the sheet molding compound (SMC) composites with variable filler, resin, and fiber composition were prepared to investigate the...

   Jian Li, **ufang Zhu, ... Mufang Li in Advanced Composites and Hybrid Materials

   Article 03 July 2024
   

4. Anisotropic Mechanical Behavior and Microstructural Characteristics of AA2099-T83 Alloy Sheet: Experiment and Simulation

   Mechanical anisotropy remains a highly regarded topic in the application of Al-Li alloy sheet. The microcosmic factors affecting mechanical...

   Mengdi Li, Lingguo Zeng, ... **n Wang in Journal of Materials Engineering and Performance

   Article 25 June 2024
   

5. Carbon Fiber Breakage Mechanism in Aluminum (Al)/Carbon Fibers (CFs) Composite Sheet during Accumulative Roll Bonding (ARB) Process

   We put forward a method of fabricating Aluminum (Al)/carbon fibers (CFs) composite sheets by the accumulative roll bonding (ARB) method. The finished...

   Shufen Hu, Zhenzhong Sun, ... Haokun Yang in Journal of Wuhan University of Technology-Mater. Sci. Ed.

   Article 17 January 2024

6. Development of Roll Profiling Methods of Sheet Rolling Production

   Abstract

   A technique for selecting roll contouring for sheet-rolling production is presented, which differs from the known ones by using a spatial...

   N. L. Bolobanova, E. A. Garber, V. S. Yusupov in Steel in Translation

   Article 01 November 2022
   

7. Texture and Tensile Properties of Three-Layered Titanium Clad–AZ31 Magnesium Alloy Sheet by Single-Pass Hot Rolling

   In the present study, a three-layered Ti/AZ31/Ti clad sheet was produced by single-pass hot rolling. Metallurgical bonding between Ti and AZ31 was...

   Baleegh Alobaid in Metallography, Microstructure, and Analysis

   Article 23 March 2023
   

8. Friction Stir Welding of Unequal-Thickness Magnesium Sheets with a Cover Sheet

   In the friction stir welding (FSW) process, it becomes challenging to utilize conventional FSW for welding unequal-thickness sheets due to the...

   Ronghao Han, Youchao Chen, ... Gang Song in Journal of Materials Engineering and Performance

   Article 08 September 2023
   

9. Fabricating Surface Composite by Friction Stir Brazing SiC_p/A356 Composite Sheet onto Monolithic Al Plate in Air

   For improving the wear resistance of soft Al substrate by fabricating surface composite, commercial Al metal matrix composite (MMC) SiC _p /A356 sheet...

   Guifeng Zhang, **nwei Wang, ... Haozhen Zhang in Journal of Materials Engineering and Performance

   Article 08 March 2023
   

10. Deformation and Failure of Thin-Sheet Specimens Made of High-Strength Steel Armox 500T Under Static and Dynamic Punching

    Recently, much attention has been paid to the study of the deformation and failure features of high-strength steels under extreme loads, under which...

    A. V. Kravchuk, R. V. Kravchuk, ... V. V. Kharchenko in Strength of Materials

    Article 01 January 2023
    

11. Influence of Final Heat Treatment Modes on Structure and Properties of High Strength Sheet Steel

    Abstract

    The influence of temperature and time of heating for quenching, type of cooling medium, temperature and heating time during low tempering on...

    K. D. Ivanov, A. L. Gavze, A. A. Pavlov in Steel in Translation

    Article 01 August 2023
    

12. Fabrication of Continuous Fiber-Reinforced Composite Sheet Metal Using Centrifugal Casting

    Sheet metals are extensively used in aerospace and automotive applications. The most desired properties of sheet metals are their excellent strength...

    Hariharan Maruthiah, M. Govindaraju, ... Nitish Saravanan in Recent Advances in Materials Technologies

    Conference paper 2023
    

13. Bending, Material Flow, and Microstructural Analyses of Friction Stir Spot Welded AA/Steel Joints using a Consumable Sheet through Experiments and Finite Element Simulations

    The present study concentrates on experimental characterization and finite element (FE) simulation of a novel friction stir spot welding (FSSW) of...

    Sukanta Das, R. Ganesh Narayanan in Journal of Materials Engineering and Performance

    Article 03 October 2023
    

14. Deep Rolling for Tailoring Residual Stresses of AA2024 Sheet Metals

    Deep Rolling as a well-known mechanical surface treatment process is investigated with the objective to tailor residual stress profiles over the...

    Jonas Lehmann, Sören Keller, ... Noomane Ben Khalifa in Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity

    Conference paper 2024
    

15. Process optimization of aluminum/steel resistance spot welding based on dynamic resistance analysis

    Because aluminum and steel have different characteristics, directly joining them one cannot obtain desired Al/steel welded joint. In order to improve...

    Kang Zhou, Gang Wang, ... Mikhail Ivanov in Journal of Materials Science

    Article 08 December 2023
    

16. Influence of Materials and Its Conditions on Pin-Extrusion from Sheet Metal

    Pin structures extruded from the sheet metal plane have numerous industrial applications. For instance, they can be used in bulk microforming to...

    Martin Kraus, Marion Merklein in Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity

    Conference paper 2024
    

17. Microstructure and Properties of Multilayer 5052 Aluminum Alloy Sheet  by Laser Welding

    In recent years, the utilization of multilayer thin plate aluminum alloy has become increasingly prevalent in battery connection pieces and electrode...

    Hewei **a, Zhikun Xu, ... Chunming Wang in Journal of Materials Engineering and Performance

    Article 07 March 2024
    

18. Surface Characteristics and Corrosion Tendency of TIG-Welded Low Carbon Steel Sheet Affected Cold Galvanizing and Processed by Immersion in Sodium Chloride Solution

    A low-carbon steel sheet welding joint, which was coated and uncoated, was investigated in the present study using the TIG welding procedure in order...

    Shaymaa Abbas Abdulsada, Ali I. Al-Mosawi in Journal of Bio- and Tribo-Corrosion

    Article 09 April 2024
    

19. Numerical investigation of high-frequency mechanical impact treatment of aluminum alloy thin sheet welded joint

    High-frequency mechanical impact (HFMI) like ultrasonic peening (UP) exhibits a significant fatigue life enhancement of welded joints. Previous...

    Hai Zhang, Zhiyan He in Welding in the World

    Article 09 March 2024
    

20. Simulation of Seizure in Sheet Metal Forming

    When seizureSeizure on the die surface occurs in the production of automobile parts in sheet metal formingSheet metal forming,Seizure it is rarely...

    Akira Azushima in Tribological Technology in Sheet Metal Forming

    Chapter 2022