Search
Search Results
-
Results of steel microarc diffusion impregnation with boron combined with carbide-forming elements
Microarc surface alloying of steel is performed in carbon powder under electric current flow conditions, which leads to accelerated surface material...
-
Influence of Material Flow on Forming Conditions in Backward Cup Extrusion
Backward cup extrusion occurs high pressure, high temperature, and a large surface expansion ratio during forming. Thus, this forming provides the...
-
Investigation on Electric Pulse-Ultrasonic Assisted Incremental Forming of AZ31B Mg Alloy
Based on the self-made electric pulse-ultrasonic assisted incremental forming platform, the incremental forming experiments of AZ31B Mg alloy were...
-
Behaviour of Hard-to-Form Material in Friction Stir Incremental Forming Process
The application of light metal alloys such as magnesium, aluminium and titanium alloys are expanding to reduce weight of various industrial products....
-
A Hybrid Incremental Sheet Forming Process for Fabricating Functional Surface Microtextures
Metallic components with large-area functional surface microtextures like microgrooves and dimples have special functions such as drag reduction and...
-
Tribological Technology in Sheet Metal Forming
This state-of-the-art book highlights recent advances and discussions in tribological technologies in sheet metal forming. The contents focus on the...
-
Prediction of Wear in Roll Forming Using Data-Based Analysis and Modeling
Knowing exactly when a tool needs to be replaced helps to avoid unscheduled downtime due to failure. In roll forming, as in many other forming...
-
Effect of Remelting Process on the Forming Quality of TC4 Selective Laser Melting Trapezoidal Overhanging Structure
The overhanging structure is an inherent geometrical limitation in the process of selective laser melting and forming parts, which can easily lead to...
-
Drinkable in situ-forming tough hydrogels for gastrointestinal therapeutics
Pills are a cornerstone of medicine but can be challenging to swallow. While liquid formulations are easier to ingest, they lack the capacity to...
-
Effect of Pipe Forming on the Mechanical Properties of Large Diameter Pipes
Abstract —The results of studying the influence of pipe forming on the mechanical properties (ultimate tensile strength, yield strength) of the base...
-
Forming Limit and Mechanical Properties of 2024-O Aluminum Alloy Under Electromagnetic Forming
AbstractThe effect of electromagnetic forming (EMF) on the forming limit and properties of 2024-O aluminum alloy is studied in this paper. This was...
-
Relaxation in Al–La Glass-Forming Melt
Abstract —Aluminum-based glass-forming alloys are actively studied due to their low specific weight and high mechanical and corrosion properties....
-
Asperity Forming Using Printed Tools in Rolling
The new method of asperity forming using plastic film with fine pattern produced by laser printer as a tool was proposed in the previous report. This...
-
Macroscopic Forming Simulation for a Unidirectional Non-crimp Fabric Using an Anisotropic Hyperelastic Material Model
A macroscopic forming simulation model employing the anisotropic hyperelastic material model *MAT_249 (LS-DYNA) was developed for a binder stabilized...
-
Thermal forming properties of a Cr-Mn-Si-Ni alloyed naval steel under different forming conditions by different constitutive models
A series of thermal compression tests on a Cr-Mn-Si-Ni alloyed naval steel were carried out at different strain rates (0.0005–0.0100 s −1 ) at...
-
Forming Limit of Dual Phase Steel: An Experimental and Numerical Investigation
Forming limit diagrams and forming limit curves are used to determine the failure limits of sheet metal materials by conducting a forming limit...
-
Patient-Specific Cranial Implant Fabrication: Evaluating Single-Point Incremental Forming with Perforated Titanium Grade-2 Sheets
Single-point incremental forming (SPIF) has emerged as a promising method, offering efficiency and precision in creating patient-specific implants....
-
Controlling the Damage Evolution in Roll Forming of a V-Section by Elastomer Rollers
Elastomer rollers are added to the conventional roll forming process to produce V-sections with reduced damage and increased product performance....
-
A Comparison of Internal Mandrel Designs for Rotary Draw Bend Forming of Carbon-fibre/Thermoplastic (PA6) Tubular Structures
Carbon fibre reinforced thermoplastic tubular structures can be post-formed into desired curvatures via rotary draw bending (RDB) at elevated...
-
Numerical Study on Unwelded Pair of Sheets in Hydrostatic Forming
In recent years, high-pressure liquid forming technology has been widely applied into the manufacture of thin shell and tubular parts. In addition to...