Search
Search Results
-
Microstructure and Mechanical Properties of SiC + Fe + Mn + Sn Hybrid Reinforced Surface Composites Fabricated by Friction Stir Processing: Effect of Double Pass
The primary objective of this research work is to analyse the effect of double pass on grain refinement during friction stir processing (FSP). The...
-
Comparative Study on the Microstructure and Properties of 304 Stainless Steel Coatings Prepared by High-Velocity Oxygen Fuel Spraying and Air Plasma Spraying
The 304 stainless steel coatings were applied to a 6061-T6 aluminum alloy substrate using high-velocity oxygen fuel spraying (HVOF) and air plasma...
-
High-Temperature Corrosion Characterization of Ni-Al Laser Cladding: The Effect of Al Content and Fe
To further enhance the high-temperature corrosion resistance of boiler tubes for improved power generation efficiency of biomass and waste-to-energy...
-
Slurry Abrasion and Dry Sliding Behavior of High-Velocity Oxy-Fuel (HVOF) Sprayed WC-12Co and WC-10Co-4Cr Coatings on EN8 Tillage Material
This research focuses on enhancing the wear resistance of EN8 steel, commonly used in agricultural implements by applying WC-12Co and WC-10Co-4Cr...
-
Effect of WC-10Co-4Cr Reinforcement Amount on Wear and Corrosion Resistance of Fe-Based Amorphous Coatings
WC-10Co-4Cr/Fe-based amorphous composite coatings with different WC-10Co-4Cr powder contents (0-12 wt.%) were prepared on C45 steel by plasma...
-
Effect of Carbon Fibre Reinforcement on an Aluminium Metal Matrix Composite Joint Through Upward Friction Stir Processing
The increasing demand for lightweight and high-performance materials aimed at reducing carbon footprints necessitates the development of innovative...
-
Microstructure and Tribological Properties of In situ-Synthesized WC-Reinforced Ni60 Coatings Prepared by Laser Cladding with Different Scanning Rates
To reduce the decomposition of WC in the composite coatings so as to improve the wear resistance, in situ -synthesized WC-reinforced Ni60 coatings...
-
Hot Workability and Microstructure Control in Monel K 500 in as Cast Condition: An Approach Using Pressing Maps
Monel K500 is a high strength, precipitation hardenable, nickel-copper alloy with additions of Al and Ti, having excellent corrosion resistance and...
-
Synergistic Improvement of Mechanical and Corrosion Properties of Mg-9.1Y-1.8Zn Alloys by Hot Extrusion
Magnesium (Mg) alloy is expected to be the promising medical implant material because of its similar strength and Young’s modulus to human bone, good...
-
Impact of Co on Thermal Aging in Sn58Bi/Cu Solder Joints: IMC Growth and Transformation in Mechanical Properties
The microstructure, evolution of intermetallic compound (IMC) layers, and mechanical property changes in Sn58Bi/Cu and Sn58Bi–0.3Co/Cu solder joints...
-
Reconstruction Mechanism of Surface Integrity for Laser Additive Manufactured 316 L Stainless Steel Subjected to Ultrasonic Surface Rolling Process: Numerical Simulation and Experimental Verification
The ultrasonic surface rolling process (USRP) is a strengthening process to improve the surface properties and enhance the mechanical performances of...
-
Tensile and Fatigue Strength, Fatigue Crack Propagation Rate, and Fracture Behavior of CaO-Added AM30 Alloy
This work investigated the tensile and fatigue strength, fatigue crack propagation rate and corresponding mechanism, and fracture behavior (under the...
-
A Novel Amorphous Alloy Coating for Elevating Corrosion Resistance of X70 Pipeline Steel
In the current investigation, X70 pipeline steel plate was welded using submerged-arc welding. Thereafter, a (Fe 0.5 Ni 0.2 ) 61 Cr 9 Co 6 Si 1.5 B 17.5 Nb 5 ...
-
Corrosion and Wear Resistance of HVOF-Sprayed Ni-Cr-Co Multi-principal Element Alloy Coating on Copper Plate
The development of protective coatings on copper alloy surfaces represents a critical research direction to enable the widespread industrial...
-
Cold-Sprayed W/B4C/Al Coatings for Neutron and γ-Rays Absorption
With the widespread use of nuclear energy, the storage of surplus spent fuel has emerged as a critical issue that needs to be solved, especially for...
-
Research on Mechanical Properties and Corrosion Behavior of (Co34Fe8Cr29Ni8Si7)100−xBx High Entropy Alloy Coating
CoCrFeNiSi high entropy alloy coatings doped with different boron (B) contents were prepared on titanium alloy substrate by laser cladding. The...
-
Machine Learning-Based Diagnosis of Thermal Barrier Coating Process Quality
Based on machine learning algorithms, a method is proposed for quality diagnosis of atmospheric plasma spraying (APS) processes used in thermal...
-
Effects of Selective Laser Melting Process Parameters on Structural, Mechanical, Tribological and Corrosion Properties of CoCrFeMnNi High Entropy Alloy
The structural, tribological, mechanical, corrosion, and other properties of materials produced by laser-based powder bed fusion additive...
-
Impact of Controlled Thermal Oxidation on Phase Transition and Tailoring Properties of Sb2S3/Sb2O3 Composites
The study investigates the synthesis and characterisation of the Sb 2 S 3 /Sb 2 O 3 composite materials through thermal oxidation at 350 °C with varying...
-
Effect of Shear Angle on Microstructure and Mechanical Properties of AZ61 Mg Alloy During Extrusion-Shear Process
To enhance the strength and plasticity of the AZ61 Mg alloy, a process called extrusion-shear (ES) was proposed. The process is based on conventional...
