Search
Search Results
-
Temperature dependent dielectric mechanism of lead-free double perovskite Sr2YbNbO6
The double perovskite Sr 2 YbNbO 6 (Strontium ytterbium niobium oxide, SYN) has been synthesized by solid-state ceramic processing technique. SYN...
-
Microstructure and interfacial behavior of SiCp/6061 aluminum matrix composite joined by laser welding with filled TixSi powder
SiC p /Al matrix composites exhibit excellent thermal and mechanical properties, making them highly desirable in aerospace, automobile, and electronics...
-
Phase transitions of the synergistic effects of Ba2+O2TiO2/Mn4+O6 nanofluid with integration of electromagnetic field for improved oil recovery
Nanoenhanced oil recovery has emerged as a promising method for improving and enhancing oil recovery. However, nanoparticles face the challenge of...
-
Review: additive manufacturing of fiber-reinforced composites
This review paper investigates novel approaches to the fabrication of fiber-reinforced composites (FRCs) via additive manufacturing (AM), with a...
-
Mechanical properties and corrosion resistance of TC4 titanium alloy joints by plasma arc welding + gas tungsten arc welding combination welding
In this paper, plasma arc welding (PAW) and plasma arc welding combined with gas tungsten arc welding (PAW + GTAW) were used to weld TC4 titanium...
-
Highly selective electrochemical reduction of nitrate-to-ammonia using iron phosphide self-supported electrode
Nitrate electrocatalytic reduction (NO 3 RR) is a potential approach to ammonia (NH 3 ) production, and the limited NH 4 + –N selectivity and NH 4 + –N yield...
-
Ductile shear damage micromechanisms studied by correlative multiscale nanotomography and SEM/EBSD for a recrystallized aluminum alloy 2198 T8
The damage mechanisms of ductile fracture under shear loading of an aluminum alloy 2198T8R were studied using flat thin-sheet samples. One sample was...
-
Preparation, characterization and scale inhibition performance of carboxymethyl ficoll
Carboxymethyl Ficoll (CM-Ficoll) has attracted wide attention in various areas such as cell isolation and pharmaceutical slow-release. However, the...
-
Stress corrosion cracking behavior and mechanism of high manganese steel in inshore SO2-polluted marine environment
High manganese steel (HMS), widely utilized in railway transportation, often encounters the compounded challenge of high stress impact and corrosion,...
-
A Review on Wire Arc Additive Manufacturing of Magnesium Alloys: Wire Preparation, Defects and Properties
Wire arc additive manufacturing (WAAM) is widely used in the rapid prototy** of large parts because of its high deposition rate, high material...
-
Investigation and Optimization of the Tribological Parameters of Hypoeutectic A356/Gr/Sn Metal Matrix Composites Using Grey-Fuzzy and ANN Modeling Methods
The present work deals with the influence of the graphite and tin particles in the wear behavior of A356 alloy-based composites. The A356 alloy...
-
Thermal spray to embed optical fibers for the monitoring and protection of metallic structures
In the framework of using fiber optics (FO) for structural health monitoring, a true challenge is to fix the fiber onto structures guaranteeing both...
-
Microstructural evolution in a precipitate-hardened (Fe0.3Ni0.3Mn0.3Cr0.1)94Ti2Al4 multi-principal element alloy during high-pressure torsion
Multi-principal element alloys demonstrate high strength, thermal stability, and irradiation resistance, making them excellent candidate materials...
-
The influence of drilling speed on the evolution mechanism of subsurface defects in single crystal 3C-SiC in molecular dynamics
To investigate the effect of drilling speed on the molecular dynamics and subsurface defect evolution mechanism of 3C-SiC single crystals, a coupled...
-
Evaluating Eriobotrya Japonica Seeds as a Sustainable Corrosion Inhibitor for Carbon Steel in Diprotic Acid Medium: Insights from Electrochemical and Computational Analysis
Metal corrosion represents a major concern in various industries. While there is interest in develo** new corrosion inhibitors, traditional ones...
-
On the Oblique Impact of Rigid Spheres at Metallic Targets
We present a numerical study on rigid spheres obliquely impacting thick metallic targets at the ordnance range of impact velocities (up to 2000 m/s)....
-
Role of Carbide-Based Thermal-Sprayed Coatings to Prevent Failure for Boiler Steels: A Review
Modern boilers operating at high temperatures and pressures face a constant battle against wear, corrosion, and oxidation. These harsh conditions can...
-
Influence of Fibre Architectures on the Mechanical Properties and Damage Failures of Composite Laminates
Owing to the importance of fibre architectures in the design of textile composite materials, understanding their effect on the failure mechanisms of...
-
Enhanced tribology properties induced by eutectic microstructure strengthening and in-situ reinforcing in laser cladded composite coating
With the development of laser deposition technology, the Invar alloy matrix materials is a kind of potential laser deposited coating because of low...
-
Evaluation and thermodynamic optimization of phase diagram of lithium niobate tantalate solid solutions
The lithium niobate–lithium tantalate solid solution’s phase diagram was investigated using experimental data from differential thermal analysis...
