Search
Search Results
-
Effect of Ti on microstructure and properties of electromagnetic stirred Al-18wt.%Mg2Si alloy
By adding different amounts of Ti into the electromagnetic stirred Al-18wt.%Mg 2 Si alloy, the effect of Ti element on the microstructure and...
-
Effect of Sc on Al3Fe phase and mechanical properties of as-cast AA5052 aluminum alloy
The AA5052 aluminum alloy is widely used in automobile and aerospace manufacturing, and with the development of light-weight alloys, it is required...
-
Improvement in corrosion resistance of Mg97Zn1Y2 alloy by Zr addition
Magnesium alloys, known for their exceptional lightweight properties, have presented challenges in various applications due to their limited...
-
Application of ultrasonic vibration to shape-casting based on resonance vibration analysis
The application of ultrasonic vibration during the casting process has been proven to refine the microstructure and enhance the properties of the...
-
Effects of cooling rate on microstructure and microhardness of directionally solidified Galvalume alloy
The influences of cooling rate on the phase constitution, microstructural length scale, and microhardness of directionally solidified Galvalume...
-
Effect of secondary aging on microstructure and properties of cast Al-Cu-Mg alloy
To obtain better comprehensive properties of cast Al-Cu-Mg alloys, the secondary aging (T6I6) process (including initial aging, interrupted aging and...
-
Effect of mold and core preheating temperature on corrosion resistance of casting Al-12Si alloy U-shaped cooling channel
Temperature has an important impact on the corrosion resistance of mold with cooling channels prepared by casting method. The effect of preheating...
-
Effects of Cu content on microstructure and mechanical properties of rheo-diecasting Al-6Zn-2Mg-xCu alloys
A systematic study on how Cu content affects the microstructure and mechanical properties of rheo-diecasting Al-6Zn-2Mg- x Cu alloys during solution...
-
Microstructure evolution and precipitation behavior of Al-Mg-Si alloy during initial aging
The microstructure evolution and precipitation behavior of Al-Mg-Si alloy during initial aging were studied using hardness testing, conductivity...
-
Effect of Mn and Mo on microstructure and mechanical properties of Al-Si-Cu-Mg-0.6Fe alloy
Effect of different Mn and Mo contents on microstructure and mechanical properties of Al-Si-Cu-Mg-0.6Fe alloy was studied. Results indicate that the...
-
Effect of melt-to-solid volume ratio and preheating temperature on Mg/Al bimetals interface by centrifugal casting
Compound casting is an efficient method for bonding dissimilar metals, in which a dramatic reaction can occur between the melt and solid. The...
-
Effects of diamond particle size on microstructure and properties of diamond/Al-12Si composites prepared by vacuum-assisted pressure infiltration
Diamond/aluminium composites have attracted attention in the field of thermal management of electronic packaging for their excellent properties. In...
-
Numerical simulation of melt flow and temperature field during DC casting 2024 aluminium alloy under different casting conditions
Casting speed, casting temperature and secondary cooling water flow rate are the main process parameters affecting the DC casting process. These...
-
Strength and ductility optimization of HPDC AlSi8MgCuZn2 alloys by modifying pre-aging treatment
Considering the components produced by high pressure die casting (HPDC) process usually with ultra-large sizes and complex morphologies, high...
-
Movement behavior and separation of Al2O3 from Al melt under rotating magnetic field
The effect of a rotating magnetic field (RMF) on the distribution of Al 2 O 3 particles with an Al melt was studied by means of simulation and...
-
Influence of non-uniform ultrasonic vibration on casting fluidity of liquid aluminum alloy
The application of ultrasonic vibration to the casting process can be realized through mould (die) vibration. However, the resonant vibration of the...
-
Microstructure characteristics and thermodynamic properties of A357-SiCp/A357 layered composites prepared by semi-solid vacuum stirring suction casting
A357-SiC p /A357 layered composites were prepared using a semi-solid vacuum stirring suction casting method. The microstructures, mechanical...
-
Composition formula of Al-TMs high-entropy alloys derived by cluster-plus-glue-atoms model and its experimental verification
High-entropy alloys (HEAs) are based on solid solutions which characterized by chemical short-range ordering (CSRO), but there is no accurate...
-
Effect of TiO2 nano-ceramic particles on microstructure and mechanical properties of Al0.4CoCrFe2Ni2 high-entropy alloy
Al 0.4 CoCrFe 2 Ni 2 high-entropy alloys with different additions of TiO 2 nano-ceramic particles (0, 1.25vol.%, 2.5vol.%, 3.75vol.% and 5vol.%,...
-
Effect of wide-spectrum pulsed magnetic field on grain refinement of pure aluminium
A wide-spectrum pulsed magnetic field (WSPMF) was obtained by adjusting the number of current pulses and the pulse interval between adjacent pulses....