Search

Search Results

1. Spark plasma sintering of Al–SiC composites with high SiC content: study of microstructure and tribological properties

   The article presents the results of the microstructure and tribological properties of Al– x SiC composites ( x = 70 and 90 wt% SiC) produced in spark...

   Beata Leszczyńska-Madej, Marcin Madej, ... Dariusz Garbiec in Archives of Civil and Mechanical Engineering

   Article Open access 28 August 2023
   

2. Effect of SiC concentration on the mechanical properties and fracture modes of SiC/Al composites via cluster analysis of acoustic emission signals

   Particle reinforced aluminum matrix composites (PRAMCs) are widely applied in the industry for their high strength-weight ratio, hardness, and good...

   Qi Wu, Ning Pei in Journal of Mechanical Science and Technology

   Article 06 February 2024

3. Fabrication of Al and Mg-Based Metal Matrix Composites with SiC Reinforcement Particles

   Aluminium (Al) and magnesium (Mg) based metal matrix composites (MMCs) are nowadays mainly used in the automotive and aerospace industry due to their...

   Pallab Sarmah, Promod Kumar Patowari in Recent Advancements in Mechanical Engineering

   Conference paper 2024
   

4. Modeling for ultrasonic vibration-assisted helical grinding of SiC particle-reinforced Al-MMCs

   Silicon carbide (SiC) particle-reinforced aluminum matrix (SiC _p /Al) composites are increasingly finding applications across a range of industries due...

   Qilin Li, Songmei Yuan, ... Muhammad Amin in The International Journal of Advanced Manufacturing Technology

   Article 04 March 2024
   

5. Novel use of cryogenic cooling conditions in improving the machining performance of Al 8011/nano-SiC composites

   The inclusion of nanoparticles makes the composite not only stronger but also lighter and highly resistant towards wear among many other positive...

   Nimel Sworna Ross, Belsam Jeba Ananth Manasea Selvin, ... Mehmet Erdi Korkmaz in The International Journal of Advanced Manufacturing Technology

   Article Open access 04 October 2023
   

6. Application of grey-ANFIS system to optimize the drilling characteristics of nano SiC reinforced Al matrix composites

   The present research examines cryogenic coolant's performance and effect on thrust force, burr height, cutting temperature, and surface finish while...

   V. V. Kalyan Chakravarthy, T. Rajmohan, ... K. Palanikumar in International Journal on Interactive Design and Manufacturing (IJIDeM)

   Article 26 May 2023
   

7. Microstructure and mechanical properties of transient liquid phase bonding Ti₃SiC₂ ceramic to SUS430 steel using an Al interlayer

   Ti ₃ SiC ₂ ceramic and SUS430 ferritic stainless steel were welded by the transient liquid phase (TLP) diffusion bonding method using an Al interlayer...

   **g-xiang Zhao, **-chao Li, ... Li-li Zheng in Journal of Iron and Steel Research International

   Article 25 June 2024
   

8. Fabrication of Al 6082/SiC Composite Using Friction Stir Processing

   Friction stir processing (FSP) is a solid-state method capable of causing a wide-ranging microstructural change in a specific region of interest. FSP...

   Nitesh Kumar, Prateek Gupta, Rakesh Kumar Singh in Journal of The Institution of Engineers (India): Series D

   Article 06 October 2022
   

9. Study on material removal mechanism of photocatalytic-assisted electrochemical milling-grinding SiC_p/Al

   Silicon carbide–reinforced aluminum matrix composites (SiC _p /Al) are widely used in aviation, automobile, electronics, and many other fields due to...

   Feng Wang, **g Zhou, ... Wansheng Zhao in The International Journal of Advanced Manufacturing Technology

   Article 25 November 2022
   

10. Influence of Nano-Al₂O₃-Mg-SiC on SS316L Perforated Clad Plate: Microstructure and Interfacial Study

    Al ₂ O ₃ -Mg-SiC powder mixed alloy is used to synthesize the cladding sheet of SS316L perforated substrates. In this experimental study, an evaluation...

    Ayush Trivedi, Vijay Kumar Dwivedi, Mayank Agarwal in Journal of The Institution of Engineers (India): Series D

    Article 28 October 2023
    

11. Performance of patterned single-layer diamond grinding wheel in grinding of Al-SiC_P composites with large infeed

    The grinding process has been evolving, in recent years, from a mere surface finishing operation to a high stock removal process. The current...

    Trilochan Prasad Nanda, Amitava Ghosh in The International Journal of Advanced Manufacturing Technology

    Article 01 March 2024
    

12. Research on cryogenic high-speed drilling performance of metal matrix composite materials (Al/SiC) using cryogenically treated drills

    Metal matrix composites (MMCs) are a novel class of materials with the benefits of both the metallic materials acting as matrix and the...

    Ch Asad Abbas, Chuanzhen Huang, ... Liu Hanlian in Journal of the Brazilian Society of Mechanical Sciences and Engineering

    Article 11 June 2024
    

13. Reciprocating Wear Behaviour of Al–SiC Composite Processed with MWS

    The present study involves the fabrication and characterization of Al–SiC composites by means of varying content of SiC (i.e., 5, 10, 15 and 20 wt....

    Neeraj Kumar Bhoi, Harpreet Singh, Saurabh Pratap in Machines, Mechanism and Robotics

    Conference paper 2022
    

14. Numerical investigation of machining of SiC/Al matrix composites by a coupled SPH and FEM

    The machining process of SiC/Al matrix composites is characterized by strong nonlinearity, and thus, there are great challenges resulting from...

    **aoyan Teng, Dehan **ao, Xudong Jiang in The International Journal of Advanced Manufacturing Technology

    Article 31 August 2022
    

15. Study on the injection wear behavior and contact characteristics of SiC and Al₂O₃ particles during the abrasive jet machining of Nickel 200

    This study delves into the necessity of surface treatment for pure nickel, with a primary focus on applying abrasive jet machining (AJM) in...

    Feng-Che Tsai in The International Journal of Advanced Manufacturing Technology

    Article 20 February 2024
    

16. Effect of ferrotitanium slag on microstructure and properties of Al₂O₃–SiC–C castables for iron runner

    Ferrotitanium slag (FS) is a waste slag produced during the smelting of ferrotitanium alloys by thermite reduction. Its alumina content is high and...

    Tu Long, Hua-zhi Gu, ... Mao-qi Ju in Journal of Iron and Steel Research International

    Article 12 March 2024
    

17. Study on mechanical and machinability characteristics of n-Al₂O₃/SiC-reinforced Al7075 composite by design of experiment technique

    Mechanical and machinability properties of intermittently reinforced aluminium alloy metal matrix composite is a difficult phenomenon as related to...

    M. Ravikumar, R. Suresh in Multiscale and Multidisciplinary Modeling, Experiments and Design

    Article 17 June 2023
    

18. Mechanical, Microstructural Characterization and Tribological Response of Al 5050/B4C/SiC Stir Cast Hybrid Metal Matrix Composite

    Al alloy matrix composites are pop** up as modern engineering materials on account of their high stiffness, good wear opposition and corrosive...

    P. Sri Sukesh, Y. Vasu, ... V. Damodara Naidu in Advances in Manufacturing, Automation, Design and Energy Technologies

    Conference paper 2023
    

19. Assessment of Johnson-Cook material constitutive parameters in finite element simulation of machining Al–SiC metal matrix composite

    The machining of Metal Matrix Composites (MMCs) poses several difficulties due to the particulate reinforcement in the matrix material owing to their...

    K. Gobivel, K. S. Vijaysekar in Journal of the Brazilian Society of Mechanical Sciences and Engineering

    Article 06 October 2023
    

20. Investigation on the cutting mechanism of SiC_p/Al composites in ultrasonic elliptical vibration machining

    Aluminum (Al)-based silicon carbide (SiC) material composites are considered as difficult-to-machine materials because of the presence of hard...

    Wenxiang Chen, Xu Zhang in The International Journal of Advanced Manufacturing Technology

    Article 19 March 2022