Search
Search Results
-
Flow Rate
In this chapter the flow rate is calculated and the rotational speed of a hydropower screw is considered. Equations are derived for the different... -
Effects of cryogenic medium on the weakly compressible flow characteristics of a high-speed centrifugal pump at a low flow rate
On the basis of the weakly compressible assumption, large-eddy simulation of a high-speed centrifugal pump is performed at a rotational speed of 9685...
-
Effect of Mass Flow Rate on Drag Reduction with Counter-Flow Jet in Laminar Hypersonic Flow at High Reynolds Number
One of the effective ways to reduce drag is the counter-flow jet. However, the correlation of the design parameters of the counter-flow jet and the... -
Data-Driven Wireless Fire Hose Flow Rate Apparatus
A wireless sensor network was created to measure water-flow rate in a fire hose. An integrated electronic piezoelectric (IEPE) accelerometer was... -
Liquid film flow rate from measurements of disturbance wave characteristics for applications in thin film flow
This paper discusses the extension of an optical liquid film thickness measurement technique to characterize liquid film flow rate in wavy thin...
-
Volume Flow Rate
Process applications invariably involve the measurement of Volume flow ratevolume or mass flow rate of a fluid—gas (such as air) or liquid (such as... -
Maximizing flow rate in single paper layer, rapid flow microfluidic paper-based analytical devices
Small, single-layer microfluidic paper-based analytical devices (µPADs) offer potential for a range of point-of-care applications; however, they have...
-
Numerical model establishment and experimental study of milling head cooling water flow rate
The thermal error suppression rate depends on the cooling effect of the water cooling system, and the cooling water flow rate is a direct factor...
-
Determination and Application of Optimum Abrasive Mass Flow Rate of Abrasive Waterjet
Abrasive waterjet can be effectively used in cutting reinforced concrete (RC) piles. The cutting performance increases with abrasive mass flow rate,...
-
Effects of Flow Noise in Characterization of Acoustic Liners at High Mean Flow
Bias flow acoustic liners are used to suppress thermo-acoustic instability in jet engines. This paper aims to identify the problems associated with... -
Flow rate variations in microfluidic circuits with free surfaces
We investigate analytically and experimentally the flow rate through a biochip in a circuit involving a peristaltic pump and reservoirs with...
-
Prediction of liquid circulation flow rate in RH degasser: improvement of decarburization at low atmospheric pressure
The two-fluid model coupled with population balance model was used for simulating the gas–liquid flow in the Ruhrstahl–Heraeus (RH) degasser. The...
-
High-Strain-Rate Behavior of 3D-Printed CuCrZr
CuCrZr alloys achieve high mechanical properties by thermal (e.g., supersaturated temper and aging), mechanical (e.g., ECAP), or thermomechanical... -
Investigations on mass flow rate of rotary vane feeder for direct metal laser deposition
Directed energy deposition (DED) is an additive manufacturing (AM) technology that builds components using laser melting and solidification. To...
-
Computational analysis and experimental validation of dialysis flow rate in central venous catheters
Despite a large number of studies on the favorable correlation between the higher dialysis dose and clinical efficiency of hemodialysis treatment,...
-
Extension of Flow Behaviour and Damage Models for Cast Iron Alloys with Strain Rate Effect
Cast iron alloys with low production cost and quite good mechanical properties are widely used in the automotive industry. To study the mechanical...
-
Experimental study on effects of gas flow rate on soot characteristics in diffusion flames coupled with plasma
This study examined the evolution of morphology and nanostructure of soot particles from the plasma-flame interaction for various gas flow rates. The...
-
Steady-state analysis of purge flow passage on the performance of the high-pressure transonic axial turbine at different mass flow ratios
The bleed air from the compressor, in the form of purge flow, is injected into the mainstream to prevent hot air ingestion into the axial turbine’s...
-
Effect of Exhaust Gas Flow Rate in Heat Recovery Steam Generator Duct Using Computational Fluid Dynamic Approach
Depletion of fossil fuels motivates energy sectors to recover waste heat and utilize the energy using a heat recovery steam generator (HRSG). In the...
-
Flow rate improvements in additively manufactured flow channels suitable for rocket engine application
This contribution describes the investigation of flow channels which are designed to be directly integrated into an aerospike engine by means of...