Search
Search Results
-
Data Science Approach for EBSD Data Processing and Materials Design for Magnesium Alloy
Electron backscatter diffractionElectron Backscatter Diffraction (EBSD) method is widely adopted in metal fields. However, despite the abundant data...
-
EBSD parameter assessment and constitutive models of crept HR3C austenitic steel
Creep damage and evolution of HR3C steel at 650 °C were investigated using electron backscatter diffraction (EBSD), and EBSD-based parameter...
-
Facets Formation of Ag3Sn Intermetallic in Sn-Bi-Ag Alloys: An EBSD and First-Principles Study
Ag 3 Sn intermetallic growth within Sn-Bi-Ag alloys during relatively slow cooling rates has a pronounced effect on the performance and reliability of...
-
Application of Electron Backscatter Diffraction (EBSD) Method in Earth Sciences
The Scanning Electron Microscope (SEM) based Electron Backscatter Diffraction (EBSD) has emerged as one of the most unique and effective techniques...
-
EBSD analysis of microstructure between liquid core forging process and traditional forging process
Assab 718 was a kind of plastic die steel and the daughter grains were the tempered sorbite after normalizing and high-temperature tempering. The...
-
Quantitative Study of Residual Strain and Geometrically Necessary Dislocation Density Using HR-EBSD Method
BackgroundOptical metrology is widely used to measure materials’ deformation and mechanical properties but current fundamental research requires more...
-
Quasi-in-situ EBSD Study of the Microstructure and Texture Evolution During Static Recrystallization in an Extruded Mg-Mn-Ce Alloy
A quasi-in-situ electron backscatter diffraction (EBSD) technique is used to study the microstructure and texture evolution in an extruded...
-
Cyclic Stress Measurement Using XRD Analysis of Grains Grown in Electrodeposited Copper Foil
BackgroundMeasurement of local stress amplitude at the stress concentration point is a key component of mechanical design from the viewpoint of...
-
In-Situ SEM High Strain Rate Testing of Large Diameter Micropillars Followed by TEM and EBSD Postmortem Analysis
BackgroundDislocation dynamic simulations are intended as a tool to understand and predict the mechanical behavior of metallic materials, but its...
-
Fabrication and microstructure analysis of novel AA7178/SiC nanocomposites
The current research has resulted in the development of a new AA7178/SiC nanocomposite. The bottom pouring stir casting process was used to...
-
Numerical analysis and experimental validation in determining optimum multi-angular twist channel extrusion die geometries
Recently, researchers have shown interest in develo** integrated severe plastic deformation (SPD) processes to produce ultra-fine grained (UFG)...
-
An EBSD Study on the Stability of Retained Austenite in Low-Si TRIP Steels During Uniaxial Tension
Two transformation-induced plasticity steels, with and without Nb–Ti additions, were subjected to uniaxial tension after simulated thermo-mechanical...
-
Microstructural Analysis of Diffusion-Bonded AZ31 Mg Alloy Fabricated by Wire-Arc-Directed Energy Deposition for Lightweight Complex Structures
Additive manufacturing is gaining wide acceptance in the manufacturing industries, but the joining of additively manufactured components is a rarely...
-
Influence of Feedrate on Microstructure and Hardness of Conventionally Spin-Formed 6061-O Plate
The influence of feedrateFeedrate on the properties and microstructureMicrostructure of spin-formed aluminum alloyAluminum alloys 6061 is explored...
-
Input Energy Spectra for Pulse-Like Ground Motions
In energy based seismic design (EBSD) approach, effect of ground motions on structures is considered as an energy input to structures (EI). The usage...
-
Effect of Spherical Ball Shoulder with Square Tool Pin on the Metallurgical and Mechanical Performance of Friction Stir Welded AA2219-T87 Alloy
Friction stir welding (FSW) of AA2219-T87 plates have been investigated in this research work utilizing a square pin tool, and the effect of...
-
Deformation and Fracture Behavior of Additively Manufactured 316L Stainless Steel
Tensile deformation and fracture behavior of an additively manufactured (AM) 316L stainless steel (SS) in the as-built, stress-relieved, and...
-
Laser-directed energy deposition of CuCrZr alloy: from statistical process parameter optimization to microstructural analysis
Laser-directed energy deposition (LDED) is a suitable manufacturing technology for processing CuCrZr alloy that has recently gained interest to be...
-
An Experimental Study on Twinning Behavior in Mg Alloys with Different Solute Elements
TwinningTwinning is an important deformation mode in magnesium alloysMagnesium alloys (Mg alloys); however, the influence of different solute...