Search
Search Results
-
ANFIS-TLBO-based optimization of drilling parameters to minimize burr formation in aluminum 6061
This research paper presents an experimental investigation conducted on a radial drilling machine, focusing on burr formation on aluminum 6061...
-
Burr formation mechanism and experimental research in longitudinal-torsional ultrasonic-assisted milling Ti-6Al-4 V
Titanium alloy milling is prone to burrs at the edges of the workpiece, which can negatively affect surface integrity and dimensional accuracy, and...
-
Top burr thickness prediction model in milling of thin-walled workpiece considering tool and workpiece deformation
In the aviation and weapon industry, aluminum alloy thin-walled workpieces are widely used, and milling is a common manufacturing process for these...
-
Analytical modeling of Poisson burr formation in the machining of Al6061 with interface constraint
During the cutting process, unnecessary burrs frequently emerge along the cutting edge. To suppress the burrs generated in the process, an effective...
-
Prediction of Exit Burr Formation in Orthogonal Micromachining via FE Modeling
Burr formation is inevitable in micromachining, nevertheless, it can be minimized in several ways. Rake angle is one of the most influencing tool... -
Tribological effects of micromilling of hardened AISI D2 steel on tool wear and top burr formation
The study of micromilling of quenched and tempered AISI D2 steel is of utmost importance due to the accelerated wear of the micromilling cutting tool...
-
Bus Travel Time Variability Modelling Using Burr Type XII Regression: A Case Study of Klang Valley
Analysing bus travel time is essential for providing valuable information to users for effective journey planning. This study aimed to analyse bus...
-
Modeling of the polycrystalline cutting of austenitic stainless steel based on dislocation density theory and study of burr formation mechanism
The presence of burrs in mechanical processing can negatively affect surface integrity and dimensional accuracy and even lead to part scrap**....
-
Subsurface deformation and burr formation in nickel-based single-crystal superalloy under grinding
Machined subsurface and burr of nickel-based single-crystal superalloys (SXs) were identified as a key factor to the aero-engine industrial...
-
Burr formation mechanism and machining parameter effect in slot micro-milling titanium alloy Ti6Al4V
Burr formation is still the major challenge in slot micro-milling of titanium alloy Ti6Al4V due to its difficult-to-machine material properties and...
-
Integrating Burr type testing effort functions in logistic reliability growth model with uncertainty factor
Software reliability growth models are modelled using a string of parameters and a set of assumptions. The fact that most of these models don’t...
-
Development of an enhanced burr accumulation model during orthogonal cutting of nickel-based super alloy
Burr size is a real issue in aeronautic for machining highly critical parts, such as broaching of turbine disks, it may affect the mechanical...
-
A causality-inspired data augmentation approach to cross-domain burr detection using randomly weighted shallow networks
The challenge of generalizing deep learning models to new, unseen areas or domains is common in material removal applications. This paper focuses on...
-
An Integrated Model of Maintenance Policies and Economic Design of X-bar Control Chart Under Burr XII Shock Model
The combination of different methods of maintenance and economic design of control charts has received much attention from researchers in recent...
-
Experimental investigations into effect of milling parameters on milling force and burr micromorphology for Zr-based bulk metallic glass by using groove milling
Zr-based bulk metallic glass is an amorphous alloy. In order to study the burr problem in the groove milling process of Zr-based bulk metallic glass,...
-
Modeling of burr height in ultrasonic-assisted drilling of DD6 superalloy
DD6 nickel-based superalloy is a typical refractory material, and has important applications in the aviation industry. Ultrasonic-assisted drilling...
-
Experimental study on the influence of workpiece shape on discharge gap and burr in LS-WEDM and the preparation of microelectrode array with specific size
Microelectrode array has significant and diverse applications in contemporary technology. The most effective method for the precise manufacture of...
-
Effect of milling type and cooling mode on cutting characteristics during CFRP milling using a PCD burr end mill
Carbon fiber–reinforced polymer (CFRP) composites are widely utilized in the aerospace industry due to their exceptional mechanical properties. In...
-
Experimental research on the top burr formation in micro milling
The top burr is the common problem that faced in micro milling and presents the significant effect on the machining quality. The top burr...
-
A Review on Various Types of Burr Formation in Drilling
The process of drilling is commonly employed in the processes involving the complex manufacturing processes. Burr exists in almost all these process...