Search

Search Results

1. Research on cryogenic high-speed drilling performance of metal matrix composite materials (Al/SiC) using cryogenically treated drills

   Metal matrix composites (MMCs) are a novel class of materials with the benefits of both the metallic materials acting as matrix and the...

   Ch Asad Abbas, Chuanzhen Huang, ... Liu Hanlian in Journal of the Brazilian Society of Mechanical Sciences and Engineering

   Article 11 June 2024
   

2. Fabrication of Al 6082/SiC Composite Using Friction Stir Processing

   Friction stir processing (FSP) is a solid-state method capable of causing a wide-ranging microstructural change in a specific region of interest. FSP...

   Nitesh Kumar, Prateek Gupta, Rakesh Kumar Singh in Journal of The Institution of Engineers (India): Series D

   Article 06 October 2022
   

3. Multi-objective Optimization Investigation of Hybrid Composite Al-7075/TiO2/SiC by Using Stir Casting Technique

   The aluminum metal matrix is using some reinforcement like that silicon carbide and titanium dioxide in form of hybrid composite by the stir casting...

   Bharat Bhushan, Kapil Kumar, M. S. Rawat in Emerging Trends in Mechanical and Industrial Engineering

   Chapter 2023
   

4. Mechanical, Microstructural Characterization and Tribological Response of Al 5050/B4C/SiC Stir Cast Hybrid Metal Matrix Composite

   Al alloy matrix composites are pop** up as modern engineering materials on account of their high stiffness, good wear opposition and corrosive...

   P. Sri Sukesh, Y. Vasu, ... V. Damodara Naidu in Advances in Manufacturing, Automation, Design and Energy Technologies

   Conference paper 2023
   

5. Spark plasma sintering of Al–SiC composites with high SiC content: study of microstructure and tribological properties

   The article presents the results of the microstructure and tribological properties of Al– x SiC composites ( x = 70 and 90 wt% SiC) produced in spark...

   Beata Leszczyńska-Madej, Marcin Madej, ... Dariusz Garbiec in Archives of Civil and Mechanical Engineering

   Article Open access 28 August 2023
   

6. Reciprocating Wear Behaviour of Al–SiC Composite Processed with MWS

   The present study involves the fabrication and characterization of Al–SiC composites by means of varying content of SiC (i.e., 5, 10, 15 and 20 wt....

   Neeraj Kumar Bhoi, Harpreet Singh, Saurabh Pratap in Machines, Mechanism and Robotics

   Conference paper 2022
   

7. Study on mechanical and machinability characteristics of n-Al₂O₃/SiC-reinforced Al7075 composite by design of experiment technique

   Mechanical and machinability properties of intermittently reinforced aluminium alloy metal matrix composite is a difficult phenomenon as related to...

   M. Ravikumar, R. Suresh in Multiscale and Multidisciplinary Modeling, Experiments and Design

   Article 17 June 2023
   

8. Effect of SiC concentration on the mechanical properties and fracture modes of SiC/Al composites via cluster analysis of acoustic emission signals

   Particle reinforced aluminum matrix composites (PRAMCs) are widely applied in the industry for their high strength-weight ratio, hardness, and good...

   Qi Wu, Ning Pei in Journal of Mechanical Science and Technology

   Article 06 February 2024

9. Fabrication of Al and Mg-Based Metal Matrix Composites with SiC Reinforcement Particles

   Aluminium (Al) and magnesium (Mg) based metal matrix composites (MMCs) are nowadays mainly used in the automotive and aerospace industry due to their...

   Pallab Sarmah, Promod Kumar Patowari in Recent Advancements in Mechanical Engineering

   Conference paper 2024
   

10. Fatigue Life Prediction for SiC/Al Materials Based on Path Planning Algorithm Considering Residual Stress

    To explore the influence of path deflection on crack propagation, a path planning algorithm is presented to calculate the crack growth length. The...

    Wenqian Shang, **ntian Liu, ... **aolan Wang in Chinese Journal of Mechanical Engineering

    Article Open access 20 February 2023
    

11. Novel use of cryogenic cooling conditions in improving the machining performance of Al 8011/nano-SiC composites

    The inclusion of nanoparticles makes the composite not only stronger but also lighter and highly resistant towards wear among many other positive...

    Nimel Sworna Ross, Belsam Jeba Ananth Manasea Selvin, ... Mehmet Erdi Korkmaz in The International Journal of Advanced Manufacturing Technology

    Article Open access 04 October 2023
    

12. Assessment of Johnson-Cook material constitutive parameters in finite element simulation of machining Al–SiC metal matrix composite

    The machining of Metal Matrix Composites (MMCs) poses several difficulties due to the particulate reinforcement in the matrix material owing to their...

    K. Gobivel, K. S. Vijaysekar in Journal of the Brazilian Society of Mechanical Sciences and Engineering

    Article 06 October 2023
    

13. Multi-objective modelling and optimization of Al–Si–SiC composite material: a multi-disciplinary approach

    The article aims to produce a new class of composite material having a high strength-to-weight ratio using Al–Si alloy and SiC particles. Explicitly,...

    M. Poornesh, Shreeranga Bhat, ... Pavana Kumara Bellairu in Multiscale and Multidisciplinary Modeling, Experiments and Design

    Article 16 November 2021
    

14. Microwave Sintering of Aluminum Composite

    Microwave heating has a long history in the industry, most notably in the food processing industry. Furthermore, it is used in the processing of...

    Vishal Naranje, Sachin Salunkhe, ... Purushottam Sharmad in Advances in Engineering Materials

    Conference paper 2024
    

15. Wear mechanism in nano polishing of SiCp/Al composite materials using molecular dynamics

    SiC particle–reinforced Al metal matrix composites (SiCp/Al) are typical difficult-to-machine materials due to the heterogeneous constituent. In...

    Cheng Zhang, Shu**g Wu, ... Cong Mao in The International Journal of Advanced Manufacturing Technology

    Article 12 January 2024
    

16. Performance of patterned single-layer diamond grinding wheel in grinding of Al-SiC_P composites with large infeed

    The grinding process has been evolving, in recent years, from a mere surface finishing operation to a high stock removal process. The current...

    Trilochan Prasad Nanda, Amitava Ghosh in The International Journal of Advanced Manufacturing Technology

    Article 01 March 2024
    

17. Study on material removal mechanism of photocatalytic-assisted electrochemical milling-grinding SiC_p/Al

    Silicon carbide–reinforced aluminum matrix composites (SiC _p /Al) are widely used in aviation, automobile, electronics, and many other fields due to...

    Feng Wang, **g Zhou, ... Wansheng Zhao in The International Journal of Advanced Manufacturing Technology

    Article 25 November 2022
    

18. Application of grey-ANFIS system to optimize the drilling characteristics of nano SiC reinforced Al matrix composites

    The present research examines cryogenic coolant's performance and effect on thrust force, burr height, cutting temperature, and surface finish while...

    V. V. Kalyan Chakravarthy, T. Rajmohan, ... K. Palanikumar in International Journal on Interactive Design and Manufacturing (IJIDeM)

    Article 26 May 2023
    

19. Face Grinding Surface Quality of High Volume Fraction SiC_p/Al Composite Materials

    The existing research on SiC _p /Al composite machining mainly focuses on the machining parameters or surface morphology. However, the surface quality...

    Xu Zhao, Yadong Gong, ... Bing Han in Chinese Journal of Mechanical Engineering

    Article Open access 04 January 2021
    

20. Investigation of machining characteristics and surface integrity for trim cut WEDM of hybrid metal matrix composite [Al 6061, SiC, and TiB₂]

    This study is focused on fabrication of Hybrid Al6061/SiC + TiB ₂ MMC by stir casting process, primarily to study the effect of two different...

    Nilesh Kumar, Jatinder Kumar in Journal of Engineering and Applied Science

    Article Open access 04 October 2023