Search
Search Results
-
RILEM TC 266-MRP: Round-Robin rheological tests on high performance mortar and concrete with adapted rheology—evaluating structural build-up at rest of mortar and concrete
This paper presents the results of a round-robin testing program undertaken by RILEM TC-266-Measuring Rheological Properties of Cement-Based...
-
Synergy of Hydration and Microstructural Properties of Sustainable Cement Mortar Supplemented with Industrial By-Products
The present research assists in resolving the issues allied with the disposal of industrial solid wastes/industrial by-products (IBPs) by develo**...
-
Recovering hydrated cement paste in new mortar as supplementary cementitious material
The old hydrated cement paste in concrete waste is only partially hydrated. An efficient activation is required to liberate the unhydrated cement...
-
Effective reutilization of textile sludge from common effluent treatment plant with mineral admixture as a partial replacement for cement in mortar mixes
Treatment of textile industry effluents produces hazardous sludge. The improper disposal of sludge causes secondary pollution due to the leaching of...
-
Enhancing Sustainability and Performance of 3D Printing Mortar with Alccofine 1203, GGBS, and Kaolin: Experimental Investigation and Mechanical Characterization
The construction industry is currently dealing with various challenges like inefficient labor, frequent crises at building sites, and complexities in...
-
Evaluation on Properties of Cement Mortar and Brick Using Magnetically Separated Coal Power Plant Bottom Ash
Recycling of abandoned waste bottom ash has been a key issue in Republic of Korea in terms of environmental protection as well as economic concern....
-
Highly efficient modified phosphogypsum building gypsum powder and environmentally friendly utilisation in self-levelling mortar
The stockpiling of phosphogypsum is a waste of land resources and also causes serious pollution to natural resources such as water and atmosphere....
-
Use of Bamboo Ash as Partial Replacement in Cement Mortar
The present high cost of construction materials in the country calls for alternative materials which will also be suitable for construction work. In...
-
A study of Ni–Ti shape memory alloy-steel fiber hybrid reinforcement in GGBS mortar for corrosion resistance
Fiber-reinforced concrete (FRC) has become popular due to its ability to enhance mechanical properties. However, FRC has limitations regarding aging,...
-
Cylinder Compression Test Method for Estimation of In-situ Masonry Mortar Strength
The crush compression test method (CCTM), which is frequently used to determine the crushing value of rock particles, is employed to determine the...
-
Mechanical and micro-structural study of cement mortar with graphene oxide
The mechanical and micro-structure properties of cement sand mortar with and without graphene oxide (GO) was studied experimentally. Graphene oxide...
-
Effect of Incorporating Supplementary Cementitious Materials on Properties of High-Performance Fine-Grained Cement Mortar
Using supplementary cementing materials (SCMs) as partial cement replacement is a common practice in the construction industry to achieve more...
-
Creep model of cement and asphalt (CA) mortar based on micro-meso structure
CA mortar, as a filling layer, has been widely used in slab ballastless track. Since the creep deformation directly determines the track regularity...
-
Effect of Silica Fume on Compressive Strength and Water Absorption of the Portland Cement–Silica Fume Blended Mortar
The unique physical and chemical properties of silica fume enhance the compressive strength and water resistance of cement mortar. The study aims to...
-
Properties of Sustainable Self-Compacting Mortar Incorporating Limestone Filler
Limestone filler (LF) is a natural material produced from grinding calcitic-limestone rocks in fine powder. The LF usage in the self-compacting...
-
Experimental Study on the Elastic Modulus of Cement Mortar with the Addition of Nano Metakaolin
This paper investigates the elastic modulus of cement mortar added with Nano metakaolin (NMK). In the experiments, we replaced 0%, 1%, 3%, 5%, and 7%...
-
Investigation of the Protection Efficiency of Repair Mortar Against Chloride Corrosion in Repaired Zones of Reinforced Concrete
In this study, specimens with concrete interfaces and repair mortar were designed to simulate a concrete repair system to investigate the efficiency...
-
Assessment of Thermal Conductivity of Mortar with a Novel Carbon Based Nano-material
The paper presents the preliminary results in terms of thermal conductivity of mortar made with a novel carbon based nano-tube. The advantage of the...
-
The influence of nano-silica precursor on the compressive strength of mortar using Advanced Machine Learning for sustainable buildings
Sustainable building construction requirements demand an efficient utilization of industrial waste as alternatives to construction materials. In this...
-
Optimal design of ferronickel slag alkali-activated mortar for repair exposed to high thermal load
In this work, the optimal design of a mortar based on alkali-activated material technology is presented. Ferronickel slag, a byproduct of the...
