Search
Search Results
-
Influence of iron phosphate on the performance of lithium iron phosphate as cathodic materials in rechargeable lithium batteries
Iron phosphate (FePO 4 ·2H 2 O) has emerged as the mainstream process for the synthesis of lithium iron phosphate (LiFePO 4 ), whereas FePO 4 ·2H 2 O produced...
-
Highly selective and green recovery of lithium ions from lithium iron phosphate powders with ozone
Since lithium iron phosphate cathode material does not contain high-value metals other than lithium, it is therefore necessary to strike a balance...
-
Effect of composite conductive agent on internal resistance and performance of lithium iron phosphate batteries
In this paper, carbon nanotubes and graphene are combined with traditional conductive agent (Super-P/KS-15) to prepare a new type of composite...
-
Study on the effect of spacing on thermal runaway and smoke temperature of double 32,650 lithium iron phosphate batteries under a narrow and long constrained space
Due to the structural characteristics of the constrained space and the poor heat resistance and abuse resistance of lithium-ion batteries (LIBs), the...
-
Regenerated LiFePO4/C for scrapped lithium iron phosphate powder batteries by pre-oxidation and reduction method
The cathode materials of scrapped lithium-iron phosphate battery are mainly composed of LiFePO 4 /C, conductive agent and PVDF, etc. Unreasonable...
-
Effect of polyvinyl pyrrolidone/sodium polyacrylate compound surfactants on slurry properties of lithium iron phosphate and electrochemical performance of the battery
The addition of surfactants is considered to be the most effective way to address agglomeration and instability in lithium battery slurry. Herein,...
-
Li2S as a cathode additive to compensate for the irreversible capacity loss of lithium iron phosphate batteries
The formation of the solid electrolyte interface (SEI) on the surface of the anode during the formation stage of lithium-ion batteries leads to the...
-
Voltammetric Sensor Based on Molybdenum-Vanadium-Lithium-Borate Glassy Matrix and Its Application for the Determination of Iron in Fortified Milk Powder
AbstractA new modified electrode was developed employing an environmentally friendly method to be used in a square-wave voltammetry technique, with...
-
Lanthanum-doped LiFePO4 cathode materials for lithium ion battery by citric acid-assisted carbothermal reduction method using acid-washed iron red as raw material
To realize the high value–added utilization of acid-washed iron red, in this paper, acid-washed iron red is used as raw material. Aiming at the...
-
Open-framework iron(II) phosphate-oxalate as anode material for Li-ion batteries
The iron(II) phosphate-oxalate compound, namely (C 4 H 12 N 2 )[Fe 4 (HPO 4 ) 2 (C 2 O 4 ) 3 ] (abbreviated as FPC), was synthesized and studied as anode material for...
-
Depolarization of Lithium Iron Phosphate Batteries by Multi-Walled Carbon Nanotube/Graphite Double-Layer Anode
AbstractPolarization of lithium iron phosphate-graphite batteries greatly affects its quality and life. In order to reduce the electrode...
-
Staged thermal runaway behaviours of three typical lithium-ion batteries for hazard prevention
Thermal runaway (TR) considerably restricts the applications of lithium-ion batteries (LIBs) and the development of renewable energy sources, thus...
-
Cathode Materials Based on Lithium Iron Phosphate/PEDOT Composites for Lithium-Ion Batteries
Abstract—Composites based on LiFePO 4 /C and poly(3,4-ethylenedioxythiophene) (LiFePO 4 /C/PEDOT) have been prepared via in situ oxidative EDOT...
-
Preparation of battery-grade LiFePO4 by the precipitation method: a review of specific features
The precipitation method is an efficient, economically feasible, and reproducible synthetic route to cathode materials for lithium-ion batteries with...
-
Gamma Radiation Shielding and Mechanical Studies on Highly Dense Lithium Iron Borosilicate Glasses Modified by Zinc Oxide
Five glass samples of a new zinc-iron lithiumborosilicate (LBSFZ) with the chemical formula 64.8B 2 O 3 –8.5SiO 2 –1.5Fe 2 O 3 – (25.2 − x )Li 2 O - x ZnO x = (0...
-
Progress towards efficient phosphate-based materials for sodium-ion batteries in electrochemical energy storage
Energy generation and storage technologies have gained a lot of interest for everyday applications. Durable and efficient energy storage systems are...
-
Thermal Runaway Experiments on High-Capacity Lithium-Ion Cells
Li-ion cells (LIC) are regarded as a very promising technology for energy storage systems due to their high energy density and good cycling...
-
Electrochemical performance of Fe-doped modified high-voltage LiNiPO4 cathode material of lithium-ion batteries
The theoretical voltage of lithium nickel phosphate (LNP) is as high as 5.1 V, making it well-suited to meet the demand for high voltage and high...
-
Study on the lithium dendrite puncturing resistance of nonwoven separators
The occurrence of an internal short circuit caused by lithium dendrite puncturing the separators is a critical safety issue for lithium batteries....
-
Impact of ball milling on the energy storage properties of LiFePO4 cathodes for lithium-ion batteries
Particle size reduction through ball milling presents an appealing approach to enhance the energy storage properties of lithium iron phosphate used...
